Case Studies in Construction Materials
Actions for selected articles.
Select all / Deselect all
Study of metakaolins with different amorphities and particle sizes activated by KOH and K 2 SiO 3
Effect of bottom ash waste on the rheology and durability of alkali activation pastes, impact of fibre factor and temperature on the mechanical properties of blended fibre-reinforced cementitious composite, experimental study of the mechanical properties and microstructure of geopolymer paste containing nano-silica from agricultural waste and crystalline admixtures, evaluating the eco-compatibility of mortars with feldspar-based fine aggregate, development of novel geopolymeric foam composites coated with polylactic acid to remove heavy metals from contaminated water, rehabilitation and repair of al- tahera church in al- hamdaniya district, mosul city, iraq, exploration of the load fatigue test method for cement concrete wheels, physico-mechanical properties and long-term creep behavior of wood-plastic composites for construction materials: effect of water immersion times, pull-out behavior evaluation of torque-controlled expansion anchors under various installation conditions of concrete, sustainable utilisation of low-grade and contaminated waste glass fines as a partial sand replacement in structural concrete, tio 2 -based glass-ceramic coatings: an innovative approach to architectural panel applications, qualitative timber structure assessment with passive ir thermography. case study of sources of common errors, production of geopolymer concrete by utilizing volcanic pumice dust, strength and durability properties of geopolymer paver blocks made with fly ash and brick kiln rice husk ash, mechanical properties of alkali-activated concrete containing crumb rubber particles, evaluation of exhumed hdpe geomembranes used as a liner in brazilian shrimp farming ponds, construction of pervious concrete pavement stretch, ahmedabad, india – case study, auxiliary air pressure balance mode for epb shield tunneling in water-rich gravelly sand strata: feasibility and soil conditioning, full-scale long-term monitoring of mine-induced vibrations for soil-structure interaction research using dimensionless response spectra, characterization of expanded polystyrene waste as binder and coating material, experimental investigation on cracking behavior of reinforced concrete tension ties, interstitial hygrothermal analysis for retrofitting exterior concrete wall of modern heritage building in korea, effect of temperature on metakaolin-quartz powder geopolymer binder with different combinations of silicates and hydroxides, evaluation of early-age thermal cracking resistance of high w/b, high volume fly ash (hvfa) concrete using temperature stress testing machine, a comparative study on green wall construction systems, case study: south valley campus of aastmt, parametric analysis of slotted concrete shear walls reinforced with shape memory alloy bars, effect of low-modulus polypropylene fiber on physical and mechanical properties of self-compacting concrete, fatigue behavior of steel fiber reinforced geopolymer concrete, cfrp lamella stay-cable and its force measurement based on microwave radar, water quenched slag from incinerator ash used as artificial stone, properties and modification of sustainable foam concrete including eco-friendly recycled powder from concrete waste, behavior of steel clamp confined brick aggregate concrete circular columns subjected to axial compression, a comparison of punching shear strengthening of rc flat plates with frp bars and steel bolts, cementitious composites made with natural fibers: investigation of uncoated and coated sisal fibers, numerical investigation for strengthened rc footings with square concrete jacketing, a state-of-the-art on development of geopolymer concrete and its field applications, a comprehensive overview of geopolymer composites: a bibliometric analysis and literature review, mechanical performance, water and chloride permeability of hybrid steel-polypropylene fiber-reinforced recycled aggregate concrete, method of assessing the technical condition and failure of overhead cranes designed to work in difficult conditions, cyclic behavior of high strength lightweight concrete slab-edge column connections with and without openings, new approach for computing damage parameters evolution in plastic damage model for concrete, shear behavior of rc beams prepared with basalt and polypropylene fibers, mechanical behavior of the asphalt wearing surface on an orthotropic steel bridge deck under cyclic loading, estimation of modulus of elasticity of compacted loess soil and lateritic-loess soil from laboratory plate bearing test, rheological, mechanical properties, and statistical significance analysis of shotcrete with various natural fibers and mixing ratios, durability of geopolymers with industrial waste, compressive strength prediction of fly ash-based geopolymer concrete via advanced machine learning techniques, testing methods and design specifications for cfrp-prestressed concrete members: a review of current practices and case studies, the effect of permeable formwork on durability and corrosion performance of concrete, behaviour of cementitious composites reinforced with polypropylene fibres using restrained eccentric ring test, enduring performance of alkali-activated mortars with metakaolin as granulated blast furnace slag replacement, energy absorption and damage characterization of gfrp laminated and pvc-foam sandwich composites under repeated impacts with reduced energies and quasi-static indentation, kaolin mining waste to produce geopolymers: physicomechanical properties and susceptibility to efflorescence formation, fatigue effects of embedding electric vehicles charging units into electrified road, axial compressive behavior of rubberized concrete-filled steel tube short columns, evaluation of eco-efficient geopolymer using chamotte and waste glass-based alkaline solutions, a comprehensive review on fire damage assessment of reinforced concrete structures, laboratory and field investigation of grouted macadam for semi-flexible pavements, comparative microstructures and mechanical properties of mortar incorporating wood fiber waste from various curing conditions, engineered cementitious composites using chinese local ingredients: material preparation and numerical investigation, performance analyses of conventional hot mix asphalt with waste additives, performance of sustainable mortar using calcined clay, fly ash, limestone powder and reinforced with hybrid fibers, prefabricated uhpc-concrete-ecc underground utility tunnel reinforced by perforated steel plate: experimental and numerical investigations, relationship between the mechanical properties and carbonation of concretes with construction and demolition waste, influence of milling process of palm oil fuel ash on the properties of palm oil fuel ash-based alkali activated mortar, the study of the feasibility of using recycled steel slag aggregate in hot mix asphalt, behaviour of ambient cured prestressed and non-prestressed geopolymer concrete beams, influence of nano waste materials on the mechanical properties, microstructure, and corrosion resistance of self-compacted concrete, effect of printed circuit board dust on the workability and mechanical properties of self-compacting concrete: a preliminary study, optimization design of ultrahigh-performance concrete based on interaction analysis of multiple factors, improving half-cell potential survey through computational inverse analysis for quantitative corrosion profiling, a novel approach to evaluate the clogging resistance of pervious concrete, cyclic behaviour of beam-column joints made of crumb rubberised concrete (crc) and traditional concrete (tc), mechanical properties of hybrid fiber reinforced coral concrete, improving thermal performance of existing uninsulated r.c. domes through passive cooling measures using polyurethane foam in double skin layer in hot climate., mechanical activation of diabase and its effect on the properties and microstructure of portland cement, characteristics of sandy soil treated using eicp-based urease enzymatic acceleration method and natural hemp fibers, study on betel nut fiber enhancing water stability of asphalt mixture based on response surface method, development and characterization of lime-based stucco for modern construction and restoration applications based on ancient stuccoes from the “el cerrito” pyramid, querétaro, mexico, sustainable improvement in engineering behavior of siwalik clay using industrial waste glass powder as additive, evaluating geosynthetic base stabilization on lateritic gravel and granular material under cyclic moving wheel loads, cyclic behavior of alkali-silica reaction-damaged reinforced concrete beam-column joints strengthened with frp composites, an experimental and modeling study on apparent bending moduli of cross-laminated bamboo and timber (clbt) in orthogonal strength directions, application of kinetic pyrolysis models to the analysis of flax chipboards under fire, recycling and reuse of construction and demolition waste: from the perspective of national natural science foundation-supported research and research-driven application, the effect of metal and polypropylene fiber on technological and physical mechanical properties of activated cement compositions, cost-effective treatment of crumb rubber to improve the properties of crumb-rubber concrete, strength evaluation of a new underwater concrete type, concrete bridge deck overlay assessment using ultrasonic tomography, assessing the challenges of condition assessment of steel-concrete (sc) composite elements using nde, characterization of novel lightweight self-compacting cement composites with incorporated expanded glass, aerogel, zeolite and fly ash, role of industrial based precursors in the stabilization of weak soils with geopolymer – a review, experimental study on energy and failure characteristics of rubber-cement composite short-column under cyclic loading, the behavior heated-damaged reinforced concrete beams retrofitted with different cfrp strip length and number of transverse groove, effect of rust inhibitor on the composition of steel passive film in carbonized concrete, peculiarities of the use of the cold recycling method for the restoration of asphalt concrete pavements, study of crushed stone-mastic asphalt concrete using fiber from fly ash of thermal power plants, eco-friendly fibre reinforced geopolymer concrete: a critical review on the microstructure and long-term durability properties, compression behavior of cfrp–confined coral aggregate concrete (ccac) circular stub columns.
ISSN: 2214-5095
Copyright © 2023 Elsevier Ltd. All rights reserved
- Journal Rankings
- Country Rankings
Case Studies in Construction Materials
Subject Area and Category
- Materials Science (miscellaneous)
Elsevier BV
Publication type
Information.
How to publish in this journal
The set of journals have been ranked according to their SJR and divided into four equal groups, four quartiles. Q1 (green) comprises the quarter of the journals with the highest values, Q2 (yellow) the second highest values, Q3 (orange) the third highest values and Q4 (red) the lowest values.
The SJR is a size-independent prestige indicator that ranks journals by their 'average prestige per article'. It is based on the idea that 'all citations are not created equal'. SJR is a measure of scientific influence of journals that accounts for both the number of citations received by a journal and the importance or prestige of the journals where such citations come from It measures the scientific influence of the average article in a journal, it expresses how central to the global scientific discussion an average article of the journal is.
Evolution of the number of published documents. All types of documents are considered, including citable and non citable documents.
This indicator counts the number of citations received by documents from a journal and divides them by the total number of documents published in that journal. The chart shows the evolution of the average number of times documents published in a journal in the past two, three and four years have been cited in the current year. The two years line is equivalent to journal impact factor ™ (Thomson Reuters) metric.
Evolution of the total number of citations and journal's self-citations received by a journal's published documents during the three previous years. Journal Self-citation is defined as the number of citation from a journal citing article to articles published by the same journal.
Evolution of the number of total citation per document and external citation per document (i.e. journal self-citations removed) received by a journal's published documents during the three previous years. External citations are calculated by subtracting the number of self-citations from the total number of citations received by the journal’s documents.
International Collaboration accounts for the articles that have been produced by researchers from several countries. The chart shows the ratio of a journal's documents signed by researchers from more than one country; that is including more than one country address.
Not every article in a journal is considered primary research and therefore "citable", this chart shows the ratio of a journal's articles including substantial research (research articles, conference papers and reviews) in three year windows vs. those documents other than research articles, reviews and conference papers.
Ratio of a journal's items, grouped in three years windows, that have been cited at least once vs. those not cited during the following year.
Leave a comment
Name * Required
Email (will not be published) * Required
* Required Cancel
The users of Scimago Journal & Country Rank have the possibility to dialogue through comments linked to a specific journal. The purpose is to have a forum in which general doubts about the processes of publication in the journal, experiences and other issues derived from the publication of papers are resolved. For topics on particular articles, maintain the dialogue through the usual channels with your editor.
Follow us on @ScimagoJR Scimago Lab , Copyright 2007-2022. Data Source: Scopus®
Cookie settings
Cookie policy
- Visit journal homepage
- Submit your paper
- Open access
- Track your paper
- View articles
- Abstracting
- Editorial board
- Browse journals
- Case Studies in Construction Materials
- Guide for authors
Guide for Authors
Case Studies in Construction Materials provides a forum for the rapid publication of short, structured Case Studies on construction materials and related Short Communications, specialising in actual case studies involving real construction projects. CSCM provides an essential compendium of case studies for practicing engineers, designers, researchers and other practitioners who are interested in all aspects construction materials. The journal will publish new and novel case studies, but will also provide a forum for the publication of high quality descriptions of classic construction material problems and solutions related to actual projects.
Case Studies in Construction Materials covers a wide range of materials and technology including: cement, concrete, reinforcement, bricks and mortars, additives, corrosion technology, ceramics, timber, steel, polymers, glass fibres, recycled materials and by-products, sealants, and adhesives.
The scope of Case Studies in Construction Materials includes, but is not restricted to, new works and repair and maintenance of the following: bridges, high-rise buildings, dams, civil engineering structures, silos, highway pavements, tunnels, water containment structures, sewers, roofing, housing, coastal defences. For enquiries please contact [email protected]
Your Paper Your Way We now differentiate between the requirements for new and revised submissions. You may choose to submit your manuscript as a single Word or PDF file to be used in the refereeing process. Only when your paper is at the revision stage, will you be requested to put your paper in to a 'correct format' for acceptance and provide the items required for the publication of your article. To find out more, please visit the Preparation section below.
Case Studies submitted to the journal should have a maximum of 8000 words including figures and tables, excluding references
Full length research article submitted to the journal should have a maximum of 14000 words including figures and tables, excluding references
All submissions will be evaluated for technical soundness and general interest to both the research community and practitioners, before a decision is made to send to review. If the paper is deemed suitable for review, then it will be sent to at least one editorial board to undertake the review.
Submission checklist You can use this list to carry out a final check of your submission before you send it to the journal for review. Please check the relevant section in this Guide for Authors for more details.
One author has been designated as the corresponding author with contact details: • E-mail address • Full postal address
Further considerations • Manuscript has been 'spell checked' and 'grammar checked' • All references mentioned in the Reference List are cited in the text, and vice versa • Permission has been obtained for use of copyrighted material from other sources (including the Internet) • A competing interests statement is provided, even if the authors have no competing interests to declare • Journal policies detailed in this guide have been reviewed • Referee suggestions and contact details provided, based on journal requirements
Declaration of competing interest Corresponding authors, on behalf of all the authors of a submission, must disclose any financial and personal relationships with other people or organizations that could inappropriately influence (bias) their work. Examples of potential conflicts of interest include employment, consultancies, stock ownership, honoraria, paid expert testimony, patent applications/registrations, and grants or other funding. All authors, including those without competing interests to declare, should provide the relevant information to the corresponding author (which, where relevant, may specify they have nothing to declare). Corresponding authors should then use this tool to create a shared statement and upload to the submission system at the Attach Files step. Please do not convert the .docx template to another file type. Author signatures are not required.
Preprints Please note that preprints can be shared anywhere at any time, in line with Elsevier's sharing policy . Sharing your preprints e.g. on a preprint server will not count as prior publication (see ' Multiple, redundant or concurrent publication ' for more information).
During submission to Editorial Manager, you can choose to release your manuscript publicly as a preprint on the preprint server SSRN once it enters peer-review with the journal. Your choice will have no effect on the editorial process or outcome with the journal. Please note that the corresponding author is expected to seek approval from all co-authors before agreeing to release the manuscript publicly on SSRN.
For more information about posting to SSRN , please consult the SSRN Terms of Use and FAQs .
Reporting sex- and gender-based analyses Reporting guidance For research involving or pertaining to humans, animals or eukaryotic cells, investigators should integrate sex and gender-based analyses (SGBA) into their research design according to funder/sponsor requirements and best practices within a field. Authors should address the sex and/or gender dimensions of their research in their article. In cases where they cannot, they should discuss this as a limitation to their research's generalizability. Importantly, authors should explicitly state what definitions of sex and/or gender they are applying to enhance the precision, rigor and reproducibility of their research and to avoid ambiguity or conflation of terms and the constructs to which they refer (see Definitions section below). Authors can refer to the Sex and Gender Equity in Research (SAGER) guidelines and the SAGER guidelines checklist . These offer systematic approaches to the use and editorial review of sex and gender information in study design, data analysis, outcome reporting and research interpretation - however, please note there is no single, universally agreed-upon set of guidelines for defining sex and gender.
Changes to authorship Authors are expected to consider carefully the list and order of authors before submitting their manuscript and provide the definitive list of authors at the time of the original submission. Any addition, deletion or rearrangement of author names in the authorship list should be made only before the manuscript has been accepted and only if approved by the journal Editor. To request such a change, the Editor must receive the following from the corresponding author : (a) the reason for the change in author list and (b) written confirmation (e-mail, letter) from all authors that they agree with the addition, removal or rearrangement. In the case of addition or removal of authors, this includes confirmation from the author being added or removed. Only in exceptional circumstances will the Editor consider the addition, deletion or rearrangement of authors after the manuscript has been accepted. While the Editor considers the request, publication of the manuscript will be suspended. If the manuscript has already been published in an online issue, any requests approved by the Editor will result in a corrigendum.
Copyright Upon acceptance of an article, authors will be asked to complete a 'License Agreement' (see more information on this). Permitted third party reuse of open access articles is determined by the author's choice of user license .
Elsevier supports responsible sharing Find out how you can share your research published in Elsevier journals.
Open access Please visit our Open Access page for more information.
Language (usage and editing services) Please write your text in good English (American or British usage is accepted, but not a mixture of these). Authors who feel their English language manuscript may require editing to eliminate possible grammatical or spelling errors and to conform to correct scientific English may wish to use the English Language Editing service available from Elsevier's Author Services.
Short Communication submitted to the journal should have a maximum of 8000 words including figures and tables, excluding references
Comprehensive review papers- by invitation submitted to the journal should have a maximum of 14000 words including figures and tables, excluding references
NEW SUBMISSIONS Submission to this journal proceeds totally online and you will be guided stepwise through the creation and uploading of your files. The system automatically converts your files to a single PDF file, which is used in the peer-review process. As part of the Your Paper Your Way service, you may choose to submit your manuscript as a single file to be used in the refereeing process. This can be a PDF file or a Word document, in any format or lay-out that can be used by referees to evaluate your manuscript. It should contain high enough quality figures for refereeing. If you prefer to do so, you may still provide all or some of the source files at the initial submission. Please note that individual figure files larger than 10 MB must be uploaded separately.
Formatting requirements There are no strict formatting requirements but all manuscripts must contain the essential elements needed to convey your manuscript, for example Abstract, Keywords, Introduction, Materials and Methods, Results, Conclusions, Artwork and Tables with Captions. If your article includes any Videos and/or other Supplementary material, this should be included in your initial submission for peer review purposes. Divide the article into clearly defined sections.
Peer review This journal operates a single anonymized review process. All contributions will be initially assessed by the editor for suitability for the journal. Papers deemed suitable are then typically sent to a minimum of two independent expert reviewers to assess the scientific quality of the paper. The Editor is responsible for the final decision regarding acceptance or rejection of articles. The Editor's decision is final. Editors are not involved in decisions about papers which they have written themselves or have been written by family members or colleagues or which relate to products or services in which the editor has an interest. Any such submission is subject to all of the journal's usual procedures, with peer review handled independently of the relevant editor and their research groups. More information on types of peer review .
Use of word processing software Regardless of the file format of the original submission, at revision you must provide us with an editable file of the entire article. Keep the layout of the text as simple as possible. Most formatting codes will be removed and replaced on processing the article. The electronic text should be prepared in a way very similar to that of conventional manuscripts (see also the Guide to Publishing with Elsevier ). See also the section on Electronic artwork. To avoid unnecessary errors you are strongly advised to use the 'spell-check' and 'grammar-check' functions of your word processor.
Highlights Highlights are optional yet highly encouraged for this journal, as they increase the discoverability of your article via search engines. They consist of a short collection of bullet points that capture the novel results of your research as well as new methods that were used during the study (if any). Please have a look at the examples here: example Highlights .
Abstract A concise and factual abstract is required. The abstract should state briefly the purpose of the research, the principal results and major conclusions. An abstract is often presented separately from the article, so it must be able to stand alone. For this reason, References should be avoided, but if essential, then cite the author(s) and year(s). Also, non-standard or uncommon abbreviations should be avoided, but if essential they must be defined at their first mention in the abstract itself.
Abbreviations Define abbreviations that are not standard in this field in a footnote to be placed on the first page of the article. Such abbreviations that are unavoidable in the abstract must be defined at their first mention there, as well as in the footnote. Ensure consistency of abbreviations throughout the article.
Formatting of funding sources List funding sources in this standard way to facilitate compliance to funder's requirements:
It is not necessary to include detailed descriptions on the program or type of grants and awards. When funding is from a block grant or other resources available to a university, college, or other research institution, submit the name of the institute or organization that provided the funding.
This research did not receive any specific grant from funding agencies in the public, commercial, or not-for-profit sectors.
Footnotes Footnotes should be used sparingly. Number them consecutively throughout the article. Many word processors build footnotes into the text, and this feature may be used. Should this not be the case, indicate the position of footnotes in the text and present the footnotes themselves separately at the end of the article.
Electronic artwork General points • Make sure you use uniform lettering and sizing of your original artwork. • Preferred fonts: Arial (or Helvetica), Times New Roman (or Times), Symbol, Courier. • Number the illustrations according to their sequence in the text. • Use a logical naming convention for your artwork files. • Indicate per figure if it is a single, 1.5 or 2-column fitting image. • For Word submissions only, you may still provide figures and their captions, and tables within a single file at the revision stage. • Please note that individual figure files larger than 10 MB must be provided in separate source files.
Figure captions Ensure that each illustration has a caption. A caption should comprise a brief title ( not on the figure itself) and a description of the illustration. Keep text in the illustrations themselves to a minimum but explain all symbols and abbreviations used.
Web references As a minimum, the full URL should be given and the date when the reference was last accessed. Any further information, if known (DOI, author names, dates, reference to a source publication, etc.), should also be given. Web references can be listed separately (e.g., after the reference list) under a different heading if desired, or can be included in the reference list.
Preprint references Where a preprint has subsequently become available as a peer-reviewed publication, the formal publication should be used as the reference. If there are preprints that are central to your work or that cover crucial developments in the topic, but are not yet formally published, these may be referenced. Preprints should be clearly marked as such, for example by including the word preprint, or the name of the preprint server, as part of the reference. The preprint DOI should also be provided.
Reference management software Most Elsevier journals have their reference template available in many of the most popular reference management software products. These include all products that support Citation Style Language styles , such as Mendeley . Using citation plug-ins from these products, authors only need to select the appropriate journal template when preparing their article, after which citations and bibliographies will be automatically formatted in the journal's style. If no template is yet available for this journal, please follow the format of the sample references and citations as shown in this Guide. If you use reference management software, please ensure that you remove all field codes before submitting the electronic manuscript. More information on how to remove field codes from different reference management software .
Reference style Text: Indicate references by number(s) in square brackets in line with the text. The actual authors can be referred to, but the reference number(s) must always be given. Example: '..... as demonstrated [3,6]. Barnaby and Jones [8] obtained a different result ....' List: Number the references (numbers in square brackets) in the list in the order in which they appear in the text. Examples: Reference to a journal publication: [1] J. van der Geer, J.A.J. Hanraads, R.A. Lupton, The art of writing a scientific article, J. Sci. Commun. 163 (2010) 51–59. https://doi.org/10.1016/j.Sc.2010.00372. Reference to a journal publication with an article number: [2] J. van der Geer, J.A.J. Hanraads, R.A. Lupton, 2018. The art of writing a scientific article. Heliyon. 19, e00205. https://doi.org/10.1016/j.heliyon.2018.e00205. Reference to a book: [3] W. Strunk Jr., E.B. White, The Elements of Style, fourth ed., Longman, New York, 2000. Reference to a chapter in an edited book: [4] G.R. Mettam, L.B. Adams, How to prepare an electronic version of your article, in: B.S. Jones, R.Z. Smith (Eds.), Introduction to the Electronic Age, E-Publishing Inc., New York, 2009, pp. 281–304. Reference to a website: [5] Cancer Research UK, Cancer statistics reports for the UK. http://www.cancerresearchuk.org/aboutcancer/statistics/cancerstatsreport/, 2003 (accessed 13 March 2003). Reference to a dataset: [dataset] [6] M. Oguro, S. Imahiro, S. Saito, T. Nakashizuka, Mortality data for Japanese oak wilt disease and surrounding forest compositions, Mendeley Data, v1, 2015. https://doi.org/10.17632/xwj98nb39r.1. Reference to software: [7] E. Coon, M. Berndt, A. Jan, D. Svyatsky, A. Atchley, E. Kikinzon, D. Harp, G. Manzini, E. Shelef, K. Lipnikov, R. Garimella, C. Xu, D. Moulton, S. Karra, S. Painter, E. Jafarov, S. Molins, Advanced Terrestrial Simulator (ATS) v0.88 (Version 0.88), Zenodo, March 25, 2020. https://doi.org/10.5281/zenodo.3727209.
Video Elsevier accepts video material and animation sequences to support and enhance your scientific research. Authors who have video or animation files that they wish to submit with their article are strongly encouraged to include links to these within the body of the article. This can be done in the same way as a figure or table by referring to the video or animation content and noting in the body text where it should be placed. All submitted files should be properly labeled so that they directly relate to the video file's content. In order to ensure that your video or animation material is directly usable, please provide the file in one of our recommended file formats with a preferred maximum size of 150 MB per file, 1 GB in total. Video and animation files supplied will be published online in the electronic version of your article in Elsevier Web products, including ScienceDirect . Please supply 'stills' with your files: you can choose any frame from the video or animation or make a separate image. These will be used instead of standard icons and will personalize the link to your video data. For more detailed instructions please visit our video instruction pages . Note: since video and animation cannot be embedded in the print version of the journal, please provide text for both the electronic and the print version for the portions of the article that refer to this content.
Research data This journal requires and enables you to share data that supports your research publication where appropriate, and enables you to interlink the data with your published articles. Research data refers to the results of observations or experimentation that validate research findings. To facilitate reproducibility and data reuse, this journal also encourages you to share your software, code, models, algorithms, protocols, methods and other useful materials related to the project.
Data linking If you have made your research data available in a data repository, you can link your article directly to the dataset. Elsevier collaborates with a number of repositories to link articles on ScienceDirect with relevant repositories, giving readers access to underlying data that gives them a better understanding of the research described.
For supported data repositories a repository banner will automatically appear next to your published article on ScienceDirect.
Research Elements This journal enables you to publish research objects related to your original research – such as data, methods, protocols, software and hardware – as an additional paper in a Research Elements journal .
During submission, you will be alerted to the opportunity to prepare and submit a manuscript to one of the Research Elements journals.
Data statement To foster transparency, we require you to state the availability of your data in your submission if your data is unavailable to access or unsuitable to post. This may also be a requirement of your funding body or institution. You will have the opportunity to provide a data statement during the submission process. The statement will appear with your published article on ScienceDirect. For more information, visit the Data Statement page ..
Online proof correction To ensure a fast publication process of the article, we kindly ask authors to provide us with their proof corrections within two days. Corresponding authors will receive an e-mail with a link to our online proofing system, allowing annotation and correction of proofs online. The environment is similar to MS Word: in addition to editing text, you can also comment on figures/tables and answer questions from the Copy Editor. Web-based proofing provides a faster and less error-prone process by allowing you to directly type your corrections, eliminating the potential introduction of errors. If preferred, you can still choose to annotate and upload your edits on the PDF version. All instructions for proofing will be given in the e-mail we send to authors, including alternative methods to the online version and PDF. We will do everything possible to get your article published quickly and accurately. Please use this proof only for checking the typesetting, editing, completeness and correctness of the text, tables and figures. Significant changes to the article as accepted for publication will only be considered at this stage with permission from the Editor. It is important to ensure that all corrections are sent back to us in one communication. Please check carefully before replying, as inclusion of any subsequent corrections cannot be guaranteed. Proofreading is solely your responsibility.
Elsevier.com visitor survey
We are always looking for ways to improve customer experience on Elsevier.com. We would like to ask you for a moment of your time to fill in a short questionnaire, at the end of your visit . If you decide to participate, a new browser tab will open so you can complete the survey after you have completed your visit to this website. Thanks in advance for your time.
- Frontiers in Sustainability
- Alternative Materials
- Research Topics
Circularity and Sustainability in Construction Materials
Total Downloads
About this Research Topic
Any process stipulated to bring sustainability in construction should invariably bridge the gaps in resource recovery chains. Construction materials are inherently carbon-intensive and energy-intensive to manufacture. To bring down the environmental footprint of the construction sector, the existing construction materials can be suitably amended by upcycling the locally available industrial side streams. Alternatively, some industrial residues can be directly utilized as construction materials by adopting suitable processing methods. However, while designing novel construction materials utilizing industrial residues, special attention needs to be given to the life cycle impact of the material recycling/upcycling avenues compared to the currently adopted method of waste disposal. A holistic life cycle analysis of the material flow processes in this regard can give indicators as to the sustainability quotient of the end product. Thus, the research in the areas of side streams utilization shall not end with product optimization, but consider the process optimization in parallel. The goal of this research topic is to attempt to address the issues of processing and logistical problems in utilizing known and established industrial side streams, as well as discuss novel side streams that are generated due to the ever-changing industrial standards. Case studies on industrial waste processing, collection, logistics, and utilization are encouraged. Studies involving slags, incinerated residues, mining side streams, e-waste, agricultural waste, and other industrial by-products in applications related to construction materials will be considered, preferably quantifying the available resource and its potential in terms of economy and environment. Triple bottom line analyses of the suggested alternative waste utilization routes can give insights to the actual efficiency of the proposed valorization routes. This Research Topic is aimed at collecting laboratory research or case-study articles that details the waste valorization techniques in construction materials and its challenges. To this end, this special issue invites articles on but not limited to: - Alkali-activated binders or geopolymers - Alternative aggregates - Bulk utilization of industrial residues in cementitious binders - Calcined clay cements - Durability studies on blended cement concrete/ alkali-activated concrete - Process optimization for industrial side streams valorization - Life Cycle Analyses (LCA) of alternative low-carbon construction products
Keywords : cements, aggregate, industrial residues, concrete, lifecycle impact, sustainability, sustainable construction
Important Note : All contributions to this Research Topic must be within the scope of the section and journal to which they are submitted, as defined in their mission statements. Frontiers reserves the right to guide an out-of-scope manuscript to a more suitable section or journal at any stage of peer review.
Topic Editors
Topic coordinators, submission deadlines, participating journals.
Manuscripts can be submitted to this Research Topic via the following journals:
- Demographics
No records found
total views views downloads topic views
Top countries
Top referring sites, about frontiers research topics.
With their unique mixes of varied contributions from Original Research to Review Articles, Research Topics unify the most influential researchers, the latest key findings and historical advances in a hot research area! Find out more on how to host your own Frontiers Research Topic or contribute to one as an author.
Case Studies in Construction Materials
ISSN: 2214-5095
- Check submitted paper
- Track accepted paper
Editorial Board
20 editors and editorial board members in 15 countries/regions
Editors-in-Chief
Prof. Dr. Afonso Rangel Garcez de Azevedo
State University of Norte Fluminense, CAMPOS DOS GOYTACAZES, Brazil
Dr. Tianyu Xie, PhD
Southeast University, Nanjing, China
Special Issues Editor
Prof. Dr. Markssuel Teixeira Marvila
Federal University of Vicosa, VICOSA, Brazil
Associate Editors
Professor Calin G. R. Mircea
Technical University of Cluj-Napoca, Cluj-Napoca, Romania
Professor Kosmas Sideris, Professor,
Democritus University of Thrace, Department of Civil Engineering, Xanthi, Greece
Prof. Dr. Yuxi Zhao, PhD
Zhejiang University, Hangzhou, China
Prof. Dr. Yan Zhuge, PhD
University of South Australia, Adelaide, Australia
Honorary Editor in Chief
Michael Grantham
Concrete Solutions, Margate, United Kingdom
Editorial Board Members
Dr.-Ing. Cornelia Baera, Senior Researcher
Polytechnic University of Timisoara, Research Centre in Engineering and Management, Timișoara, Romania
Building materials, Concrete and cementitious composites, NDT for structural evaluation, Management and marketing in production, Sustainability
Dr. Piotr Berkowski, PhD, MSc, CEng
Wrocław University of Science and Technology, Wroclaw, Poland
Application of computer methods in the analysis and design of building structures, historical analysis of buildings, diagnostics and revitalization of historic brick, wooden, steel and reinforced concrete buildings (residential, public and industrial), models of destruction and durability of concrete and reinforced concrete structures.
Professor Hans-Dieter Beushausen
University of Cape Town, Department of Civil Engineering, Rondebosch, South Africa
Assoc. Professor Aboelkasim Diab, PhD
Aswan University, Sahary, Egypt
Pavement materials, testing and instrumentation, sustainability, asphalt
Professor Richard Fitton, PhD
University of Salford, Salford, United Kingdom
Energy Efficency, Building Physics
Professor Chris Goodier, PhD FICT FHEA MCIOB MCS
Loughborough University, Loughborough, United Kingdom
Concrete materials, offsite construction, construction technology and construction management.
Mr. Joost Gulikers
Netherlands Ministry of Infrastructure and Water Management, 's-Gravenhage, Netherlands
Dr. Carlos Jurado Cabanes
Polytechnic University of Madrid, Madrid, Spain
Dr. Jukka Lahdensivu
Tampere University, TAMPERE, Finland
Assoc. Professor Wengui Li, PhD / ARC Future Fellow
University of Technology Sydney School of Civil and Environmental Engineering, Broadway, New South Wales, Australia
Smart concrete, Sustainable construction materials, Concrete nanotechnology, Recycled aggregate concrete, Concrete durability, Self-sensing, Self-healing, Photocatalysis, Energy saving
Dr. Fernando Pacheco-Torgal, PhD/Dr
University of Minho School of Engineering, Guimaraes, Portugal
Geopolymers, Concrete, Cement, Properties, Durability, Construction and demolition wastes, Industrial waste recycling, Masonry bricks, Masonry blocks, Nano particle based concrete, Concrete nanotechnology, Alkali-activated cement, Concrete with polymer admixtures, Biopolymer based concrete, Concrete recycling, Recycled aggregates, Construction wastes, Demolition wastes
Dr. Rob Polder
TNO, Delft, Netherlands
Dr. Edna Possan Possan, PhD
Federal University of Latin-American Integration, FOZ DO IGUACU, Brazil
Civil Engineering, Sustainability, Eco-efficient Materials, Construction Materials, Carbon capture, Mineralization, Material Characterization, Self-healing, Biomaterials, Concrete durability
Assoc. Professor Sudharshan N. Raman
Monash University - Malaysia Campus, Petaling Jaya, Malaysia
Structural Concrete
Prof. Dr. Baris Sayin
Istanbul University-Cerrahpasa, Department of Civil Engineering, İstanbul, Turkey
Civil Engineering, Strengthening, Restoration, Seismic analysis
Dr. Ulrich Schneck
CITec Concrete Improvement Technologies GmbH, Dresden, Germany
Dr. Eddie Shu Siu Lam, MSc PhD PgD(Law) PCLL CEng FHKIE FIStructE MIMechE RPE RI RSE Class-1-RSE-PRC Barrister Mediator
The Hong Kong Polytechnic University, Hong Kong, Hong Kong
Structural, Earthquake, Seismic, Concrete, Materials
Assoc. Professor Lingyun You, PhD
Huazhong University of Science and Technology, Wuhan, Hubei, China
Pavement Materials and Mechanics, Intelligent Infrastructures, Multiscale Modeling Techniques
Professor Zhanping You, PhD, PE
Michigan Technological University, Houghton, Michigan, United States of America
Asphalt, civil engineering
Professor Henglong Zhang, PhD
Hunan University College of Civil Engineering, Changsha, China
Development and application of new pavement materials, durability theory and technology of pavement materials, recycling technology of waste pavement materials
Professor Yamei Zhang
Southeast University School of Materials Science and Engineering, Nanjing, China
Automation Construction and 3D printing technique
Early Career Editorial Board Members
Assist. Prof. Eleonora Bruschi
Polytechnic of Milan, Milano, Italy
Structural dynamics, Earthquake Engineering, Structures, Seismic protection, Anti-seismic devices, Energy dissipation devices, Base Isolation
Dr. Roman Fediuk
Far Eastern Federal University, Vladivostok, Russian Federation
Civil Engineering
Assist. Prof. Xijun (Jeff) Shi
Texas State University, San Marcos, Texas, United States of America
Pavements, Concrete, Asphalt
Dr. Jessica Souza
University of Brasilia, BRASILIA, Brazil
Assist. Prof. Flavio Stochino
University of Cagliari, Cagliari, Italy
Blast, Fire, Concrete, Structures, Sustainability, Recycled Concrete
Dr. Shenghua Wu
University of South Alabama, Mobile, Alabama, United States of America
Asphalt pavement, recycling materials, sustainability, resiliency, green asphalt technology
All members of the Editorial Board have identified their affiliated institutions or organizations, along with the corresponding country or geographic region. Elsevier remains neutral with regard to any jurisdictional claims.
- Open Search
Medius Pay helps Coastal Construction manage payments in a single automated solution
As a large distributor of sealants and fire protection products, Coastal depends on hundreds of vendors. Manual processes were slowing down “the last mile” in the AP department until Coastal discovered Medius Pay.
Medius Pay success story
Background on Coastal Construction and their set-up
- Website: coastalconstruction.com
- Industry: Building Materials
- ERP: Microsoft Dynamics AX
- Country: USA
- Solutions used: Medius Pay
Benefits of Medius Pay
- Creates a revenue stream from cash back on AP spend through virtual card payments
- Offers continuous support with best-in-class service when needed
- Connects to Coastal’s existing bank accounts
Who is Coastal Construction?
Coastal Construction is one of the largest independent distributors of sealants, waterproofing and fire protection products in the US.
What was the challenge?
In “the final mile” of AP, manual payments were causing delays and threatening supplier relationships that were integral to the success of Coastal’s business.
How did we help?
Medius replaced convoluted workflows with a modern platform that allows Coastal to manage ePayments from anywhere, on any device.
Introduce peace-of-mind into your payment processes
"We have no complaints about working with Pay. We would recommend them to anyone seeking a solution for electronic payments."
Medius Pay helped Coastal Construction increase the speed and efficiency of processing payments
Since 1975, Coastal Construction has grown to become one of the largest independent distributors of sealants and fireproofing materials in the US. Its product line includes a vast array of waterproofing materials, coatings, safety equipment and tools.
Knowing that solid vendor relationships were integral to its continued success, Coastal wanted to improve its invoice processing and payment system. Learn how Medius Pay streamlined Coastal’s payment system and gave the AP department better control of cash flow and approvals.
Positioned for success:
Coastal discovered a better way to pay its suppliers using Medius’ fully automated payment solution. With visibility into when and if payments have been made, Coastal is better equipped to manage expenses and control cashflow.
Read the full case study
More Case Studies
Medius builds effective payments solution for PENTA Building Group
NIC Global saves money and increases productivity with Medius
Unident takes a bite out of manual processes with AP Automation
Medius fashions an effective Payments solution for Acne Studios
View All Case Studies
Our AP solution comes with a guarantee: You don’t have to work tonight.
Managing AP should be about strategy, not stress. Medius goes beyond basic automation by using AI to do the work – so AP teams can (heaven forbid) go home and rest easy. Spend a few minutes with one of our advisors to learn more.
Book a Demo More Resources
Information
- Author Services
Initiatives
You are accessing a machine-readable page. In order to be human-readable, please install an RSS reader.
All articles published by MDPI are made immediately available worldwide under an open access license. No special permission is required to reuse all or part of the article published by MDPI, including figures and tables. For articles published under an open access Creative Common CC BY license, any part of the article may be reused without permission provided that the original article is clearly cited. For more information, please refer to https://www.mdpi.com/openaccess .
Feature papers represent the most advanced research with significant potential for high impact in the field. A Feature Paper should be a substantial original Article that involves several techniques or approaches, provides an outlook for future research directions and describes possible research applications.
Feature papers are submitted upon individual invitation or recommendation by the scientific editors and must receive positive feedback from the reviewers.
Editor’s Choice articles are based on recommendations by the scientific editors of MDPI journals from around the world. Editors select a small number of articles recently published in the journal that they believe will be particularly interesting to readers, or important in the respective research area. The aim is to provide a snapshot of some of the most exciting work published in the various research areas of the journal.
- Active Journals
- Find a Journal
- Proceedings Series
- For Authors
- For Reviewers
- For Editors
- For Librarians
- For Publishers
- For Societies
- For Conference Organizers
- Open Access Policy
- Institutional Open Access Program
- Special Issues Guidelines
- Editorial Process
- Research and Publication Ethics
- Article Processing Charges
- Testimonials
- Preprints.org
- SciProfiles
- Encyclopedia
Article Menu
- Subscribe SciFeed
- Recommended Articles
- Google Scholar
- on Google Scholar
- Table of Contents
Find support for a specific problem in the support section of our website.
Please let us know what you think of our products and services.
Visit our dedicated information section to learn more about MDPI.
JSmol Viewer
Reducing life cycle embodied energy of residential buildings: importance of building and material service life, 1. introduction, 1.1. life cycle embodied energy assessment, approaches and examples of embodied energy assessment, 1.2. building service life, 1.3. materials service life, 2. materials and methods, 2.1. case study house, 2.2. calculating initial and recurrent embodied energy, 2.2.1. estimating average building service life and additional scenarios, 2.2.2. estimating material service life and additional scenarios, 3. results and discussion, 3.1. base case results (with average material and building service life), 3.2. effect of material service life variations, 3.3. effect of building service life variations, 3.3.1. initial embodied energy, 3.3.2. recurrent embodied energy, 3.3.3. life cycle embodied energy, 3.4. combined effect of building and material service life, 3.5. sensitivity analysis, 3.5.1. life cycle embodied energy variations based on the 50-year assessment period, 3.5.2. life cycle embodied energy variations based on the 150-year assessment period, 4. conclusions, institutional review board statement, informed consent statement, data availability statement, conflicts of interest.
- Abbas, B.; Khamis, W.; Abdullah Ahmed, M.; Shà, H.; Mohammed, M. Environmental Pollution with the Heavy Metal Compound. Res. J. Pharm. Technol. 2018 , 11 , 4035–4041. [ Google Scholar ] [ CrossRef ]
- Ebadi, A.G.; Toughani, M.; Najafi, A.; Babaee, M. A Brief Overview on Current Environmental Issues in Iran. Cent. Asian J. Environ. Sci. Technol. Innov. 2020 , 1 , 1–11. [ Google Scholar ] [ CrossRef ]
- Qadri, H.; Bhat, R.; Mehmood, M.; Hamid Dar, G. Fresh Water Pollution Dynamics and Remediation ; Springer: Singapore, 2019; ISBN 9789811382765. [ Google Scholar ]
- Anser, M.; Hanif, I.; Vo, X.; Alharthi, M. The Long-Run and Short-Run Influence of Environmental Pollution, Energy Consumption, and Economic Activities on Health Quality in Emerging Countries. Environ. Sci. Pollut. Res. 2020 , 27 , 32518–32532. [ Google Scholar ] [ CrossRef ] [ PubMed ]
- Sarkodie, S.A.; Ahmed, M.Y.; Owusu, P.A. Ambient Air Pollution and Meteorological Factors Escalate Electricity Consumption. Sci. Total Environ. 2021 , 795 , 148841. [ Google Scholar ] [ CrossRef ]
- He, P.; Liang, J.; Qiu, Y.; Li, Q.; Xing, B. Increase in Domestic Electricity Consumption from Particulate Air Pollution. Nat. Energy 2020 , 5 , 985–995. [ Google Scholar ] [ CrossRef ]
- Koondhar, M.A.; Houjian, L.; Wang, H.; Sanchir, B.; Kong, R. Looking Back over the Past Two Decades on the Nexus between Air Pollution, Energy Consumption, and Agricultural Productivity in China: A Qualitative Analysis Based on the ARDL Bounds Testing Model. Environ. Sci. Pollut. Res. Int. 2020 , 27 , 13575–13589. [ Google Scholar ] [ CrossRef ]
- Guzmán-Luna, P.; Gerbens-Leenes, P.W.; Vaca-Jiménez, S.D. The Water, Energy, and Land Footprint of Tilapia Aquaculture in Mexico, a Comparison of the Footprints of Fish and Meat. Resour. Conserv. Recycl. 2021 , 165 , 105224. [ Google Scholar ] [ CrossRef ]
- Dharmala, N.; Kholod, N.; Chaturvedi, V.; Ghosh, P.P.; Mathur, R.; Bali, S.; Behera, A.; Chamola, S.; Clarke, L.; Evans, M.; et al. Win-Win Transportation Strategies for India: Linking Air Pollution and Climate Mitigation. Energy Clim. Chang. 2022 , 3 , 100072. [ Google Scholar ] [ CrossRef ]
- Musa, K.S.; Maijama’a, R. Economic Growth, Energy Consumption and Environmental Pollution in Nigeria: Evidence from ARDL Approach. Energy Econ. Lett. 2020 , 7 , 61–73. [ Google Scholar ] [ CrossRef ]
- Nazir, M.S.; Mahdi, A.J.; Bilal, M.; Sohail, H.M.; Ali, N.; Iqbal, H.M.N. Environmental Impact and Pollution-Related Challenges of Renewable Wind Energy—A Review. Sci. Total Environ. 2019 , 683 , 436–444. [ Google Scholar ] [ CrossRef ]
- Sun, L.; Zhang, T.; Liu, S.; Wang, K.; Rogers, T.; Yao, L.; Zhao, P. Reducing Energy Consumption and Pollution in the Urban Transportation Sector: A Review of Policies and Regulations in Beijing. J. Clean. Prod. 2021 , 285 , 125339. [ Google Scholar ] [ CrossRef ]
- Wang, X.-C.; Klemeš, J.J.; Dong, X.; Fan, W.; Xu, Z.; Wang, Y.; Varbanov, P.S. Air Pollution Terrain Nexus: A Review Considering Energy Generation and Consumption. Renew. Sustain. Energy Rev. 2019 , 105 , 71–85. [ Google Scholar ] [ CrossRef ]
- Cheng, B.; Lu, K.; Li, J.; Chen, H.; Luo, X.; Shafique, M. Comprehensive Assessment of Embodied Environmental Impacts of Buildings Using Normalized Environmental Impact Factors. J. Clean. Prod. 2022 , 334 , 130083. [ Google Scholar ] [ CrossRef ]
- Li, L.; Sun, W.; Hu, W.; Sun, Y. Impact of Natural and Social Environmental Factors on Building Energy Consumption: Based on Bibliometrics. J. Build. Eng. 2021 , 37 , 102136. [ Google Scholar ] [ CrossRef ]
- Minunno, R.; O’Grady, T.; Morrison, G.M.; Gruner, R.L. Investigating the Embodied Energy and Carbon of Buildings: A Systematic Literature Review and Meta-Analysis of Life Cycle Assessments. Renew. Sustain. Energy Rev. 2021 , 143 , 110935. [ Google Scholar ] [ CrossRef ]
- International Energy Agency (IEA); United Nations Environment Programme (UNEP). 2018 Global Status Report: Towards a Zero-Emission, Efficient, and Resilient Buildings and Construction Sector ; United Nations Environment Programme: Nairobi, Kenya, 2018; pp. 1–73. [ Google Scholar ]
- World Energy Council (WEC). World Energy Issues Monitor 2020: Decoding New Signals of Change ; World Energy Council: London, UK, 2020; pp. 1–179. [ Google Scholar ]
- Zuev, V. Setting Up a Global System for Sustainable Energy Governance. In The Geopolitics of the Global Energy Transition ; Lecture Notes in Energy; Hafner, M., Tagliapietra, S., Eds.; Springer International Publishing: Cham, Switzerland, 2020; pp. 365–381. ISBN 978-3-030-39066-2. [ Google Scholar ]
- United Nations, Department of Economic and Social Affairs, Population Division. World Population Prospects 2019—Highlights ; United Nations: New York City, NY, USA, 2019; ISBN 978-92-1-148316-1. [ Google Scholar ]
- Chen, H.; Tackie, E.A.; Ahakwa, I.; Musah, M.; Salakpi, A.; Alfred, M.; Atingabili, S. Does Energy Consumption, Economic Growth, Urbanization, and Population Growth Influence Carbon Emissions in the BRICS? Evidence from Panel Models Robust to Cross-Sectional Dependence and Slope Heterogeneity. Environ. Sci. Pollut. Res. 2022 , 29 , 37598–37616. [ Google Scholar ] [ CrossRef ]
- Warsame, A.A. The Impact of Urbanization on Energy Demand: An Empirical Evidence from Somalia. Int. J. Energy Econ. Policy 2022 , 12 , 383–389. [ Google Scholar ] [ CrossRef ]
- Fatourehchi, D.; Noguchi, M.; Doloi, H. Review of the Existing Energy Policies and Challenges of Energy Consumption to Achieve a Sustainable Behavioural Change among Iranian Households. In Proceedings of the 4th International Conference on Smart Villages and Rural Development, Smart Villages Lab (SVL) (COSVARD 2021), Webinar, Melbourne, VIC, Australia, 13–14 December 2021. [ Google Scholar ]
- Fatourehchi, D.; Noguchi, M.; Doloi, H. Iranian Household Electricity Use Compared to Selected Countries. Encyclopedia 2022 , 2 , 1637–1665. [ Google Scholar ] [ CrossRef ]
- Birgisdottir, H.; Moncaster, A.; Wiberg, A.H.; Chae, C.; Yokoyama, K.; Balouktsi, M.; Seo, S.; Oka, T.; Lützkendorf, T.; Malmqvist, T. IEA EBC Annex 57 ‘Evaluation of Embodied Energy and CO2eq for Building Construction. Energy Build. 2017 , 154 , 72–80. [ Google Scholar ] [ CrossRef ][ Green Version ]
- Mirabella, N.; Roeck, M.; Ruschi Mendes SAADE, M.; Spirinckx, C.; Bosmans, M.; Allacker, K.; Passer, A. Strategies to Improve the Energy Performance of Buildings: A Review of Their Life Cycle Impact. Buildings 2018 , 8 , 105. [ Google Scholar ] [ CrossRef ]
- Danish Government. Strategy for Energy Renovation of Buildings—The Route to Energy-Efficient Buildings in Tomorrow’s Denmark ; Danish Government: Copenhagen, Denmark, 2014; pp. 1–54. [ Google Scholar ]
- Amran, Y.A.; Amran, Y.M.; Alyousef, R.; Alabduljabbar, H. Renewable and Sustainable Energy Production in Saudi Arabia According to Saudi Vision 2030; Current Status and Future Prospects. J. Clean. Prod. 2020 , 247 , 119602. [ Google Scholar ] [ CrossRef ]
- UAE Government. UAE Energy Strategy 2050—The Official Portal of the UAE Government. Available online: https://u.ae/en/about-the-uae/strategies-initiatives-and-awards/federal-governments-strategies-and-plans/uae-energy-strategy-2050 (accessed on 11 October 2020).
- International Bank for Reconstruction and Development. The World Bank Tracking SDG 7: The Energy Progress Report (2020) ; International Bank for Reconstruction and Development: Washington DC, USA, 2020; pp. 1–204. [ Google Scholar ]
- United Nations, Department of Economic and Social Affairs. Global Sustainable Development Report 2019|The Future Is Now: Science for Achieving Sustainable Development ; United Nations: New York, NY, USA, 2019; pp. 1–252. [ Google Scholar ]
- Rauf, A.; Attoye, D.E.; Crawford, R.H. Life Cycle Energy Analysis of a House in UAE. In Proceedings of the ZEMCH 2021 International Conference, ZEMCH Network, Dubai, United Arab Emirates, 26–28 October 2021; pp. 13–23. [ Google Scholar ]
- Tabet Aoul, K.A.; Hagi, R.; Abdelghani, R.; Akhozheya, B.; Karaouzene, R.; Syam, M. The Existing Residential Building Stock in UAE: Energy Efficiency and Retrofitting Opportunities. In Proceedings of the 6th Annual International Conference on Architecture and Civil Engineering, ACE, Singapore, 14–15 May 2018. [ Google Scholar ]
- Mawed, M.; Al Bairam, I.; Al-Hajj, A. Linking Between Sustainable Development and Facilities Management Strategies: An Integrated Approach for Evaluating the Sustainability of Existing Building in the UAE. In Proceedings of the ICSF 2017, Manama, Bahrain, 26–27 November 2017; p. 33. [ Google Scholar ]
- Crawford, R.H. Post-Occupancy Life Cycle Energy Assessment of a Residential Building in Australia. Archit. Sci. Rev. 2014 , 57 , 114–124. [ Google Scholar ] [ CrossRef ]
- Rauf, A. The Effect of Building and Material Service Life on Building Life Cycle Embodied Energy. Ph.D. Thesis, The University of Melbourne, Melbourne, VIC, Australia, 2016. [ Google Scholar ]
- Rauf, A.; Attoye, D.E.; Crawford, R. Embodied and Operational Energy of a Case Study Villa in UAE with Sensitivity Analysis. Buildings 2022 , 12 , 1469. [ Google Scholar ] [ CrossRef ]
- Singh, A.; Vaddy, P.; Biligiri, K.P. Quantification of Embodied Energy and Carbon Footprint of Pervious Concrete Pavements through a Methodical Lifecycle Assessment Framework. Resour. Conserv. Recycl. 2020 , 161 , 104953. [ Google Scholar ] [ CrossRef ]
- Ajayi, S.O.; Oyedele, L.O.; Ilori, O.M. Changing Significance of Embodied Energy: A Comparative Study of Material Specifications and Building Energy Sources. J. Build. Eng. 2019 , 23 , 324–333. [ Google Scholar ] [ CrossRef ][ Green Version ]
- Crawford, R.H.; Czerniakowski, I.; Fuller, R.J. A Comprehensive Framework for Assessing the Life-Cycle Energy of Building Construction Assemblies. Archit. Sci. Rev. 2010 , 53 , 288–296. [ Google Scholar ] [ CrossRef ][ Green Version ]
- Janjua, S. Sustainability Implication of Residential Building Materials Considering Service Life Variability. Ph.D. Thesis, Curtin University, Bentley, WA, Australia, 2021. [ Google Scholar ]
- Rauf, A.; Crawford, R.H. Building Service Life and Its Effect on the Life Cycle Embodied Energy of Buildings. Energy 2015 , 79 , 140–148. [ Google Scholar ] [ CrossRef ]
- Rauf, A.; Crawford, R.H. The Relationship between Material Service Life and the Life Cycle Energy of Contemporary Residential Buildings in Australia. Archit. Sci. Rev. 2013 , 56 , 252–261. [ Google Scholar ] [ CrossRef ]
- Dixit, M.K. Life Cycle Recurrent Embodied Energy Calculation of Buildings: A Review. J. Clean. Prod. 2019 , 209 , 731–754. [ Google Scholar ] [ CrossRef ]
- Tavares, V.; Lacerda, N.; Freire, F. Embodied Energy and Greenhouse Gas Emissions Analysis of a Prefabricated Modular House: The “Moby” Case Study. J. Clean. Prod. 2019 , 212 , 1044–1053. [ Google Scholar ] [ CrossRef ]
- Venkatraj, V.; Dixit, M.K. Life Cycle Embodied Energy Analysis of Higher Education Buildings: A Comparison between Different LCI Methodologies. Renew. Sustain. Energy Rev. 2021 , 144 , 110957. [ Google Scholar ] [ CrossRef ]
- Cabeza, L.F.; Boquera, L.; Chàfer, M.; Vérez, D. Embodied Energy and Embodied Carbon of Structural Building Materials: Worldwide Progress and Barriers through Literature Map Analysis. Energy Build. 2021 , 231 , 110612. [ Google Scholar ] [ CrossRef ]
- Dascalaki, E.G.; Argiropoulou, P.; Balaras, C.A.; Droutsa, K.G.; Kontoyiannidis, S. Analysis of the Embodied Energy of Construction Materials in the Life Cycle Assessment of Hellenic Residential Buildings. Energy Build. 2021 , 232 , 110651. [ Google Scholar ] [ CrossRef ]
- Grazieschi, G.; Asdrubali, F.; Thomas, G. Embodied Energy and Carbon of Building Insulating Materials: A Critical Review. Clean. Environ. Syst. 2021 , 2 , A100032. [ Google Scholar ] [ CrossRef ]
- Chau, C.K.; Leung, T.M.; Ng, W.Y. A Review on Life Cycle Assessment, Life Cycle Energy Assessment and Life Cycle Carbon Emissions Assessment on Buildings. Appl. Energy 2015 , 143 , 395–413. [ Google Scholar ] [ CrossRef ]
- Marzouk, M.; Elshaboury, N. Science Mapping Analysis of Embodied Energy in the Construction Industry. Energy Rep. 2022 , 8 , 1362–1376. [ Google Scholar ] [ CrossRef ]
- Venkatraj, V.; Dixit, M.K. Challenges in Implementing Data-Driven Approaches for Building Life Cycle Energy Assessment: A Review. Renew. Sustain. Energy Rev. 2022 , 160 , 112327. [ Google Scholar ] [ CrossRef ]
- Weththasinghe, K.K.; Stephan, A.; Francis, V.; Tiwari, P. Improving Material Selection in Shopping Centres through a Parametric Life Cycle Embodied Flow and Material Cost Analysis Model. Renew. Sustain. Energy Rev. 2022 , 165 , 112530. [ Google Scholar ] [ CrossRef ]
- ISO 14040:2006 ; Environmental Management-Life Cycle Assessment-Principles and Framework. International Organisation for Standardization: Geneva, Switzerland, 2006.
- Almeida, M.; Ferreira, M.; Barbosa, R. Relevance of Embodied Energy and Carbon Emissions on Assessing Cost Effectiveness in Building Renovation—Contribution from the Analysis of Case Studies in Six European Countries. Buildings 2018 , 8 , 103. [ Google Scholar ] [ CrossRef ][ Green Version ]
- Dixit, M.K.; Singh, S. Embodied Energy Analysis of Higher Education Buildings Using an Input-Output-Based Hybrid Method. Energy Build. 2018 , 161 , 41–54. [ Google Scholar ] [ CrossRef ]
- Garcia, R.; Calantone, R. A Critical Look at Technological Innovation Typology and Innovativeness Terminology: A Literature Review. J. Prod. Innov. Manag. Int. Publ. Prod. Dev. Manag. Assoc. 2002 , 19 , 110–132. [ Google Scholar ] [ CrossRef ][ Green Version ]
- Giordano, R.; Giovanardi, M.; Guglielmo, G.; Micono, C. Embodied Energy and Operational Energy Evaluation in Tall Buildings According to Different Typologies of Façade. Energy Procedia 2017 , 134 , 224–233. [ Google Scholar ] [ CrossRef ]
- Koezjakov, A.; Urge-Vorsatz, D.; Crijns-Graus, W.; Van den Broek, M. The Relationship between Operational Energy Demand and Embodied Energy in Dutch Residential Buildings. Energy Build. 2018 , 165 , 233–245. [ Google Scholar ] [ CrossRef ]
- Omrany, H.; Soebarto, V.; Sharifi, E.; Soltani, A. Application of Life Cycle Energy Assessment in Residential Buildings: A Critical Review of Recent Trends. Sustainability 2020 , 12 , 351. [ Google Scholar ] [ CrossRef ][ Green Version ]
- Dixit, M.K.; Culp, C.H.; Lavy, S.; Fernandez-Solis, J. Recurrent Embodied Energy and Its Relationship with Service Life and Life Cycle Energy: A Review Paper. Facilities 2014 , 32 , 22. [ Google Scholar ] [ CrossRef ][ Green Version ]
- Crawford, R.H. Life Cycle Assessment in the Built Environment ; Routledge: Abingdon, UK, 2011. [ Google Scholar ]
- Dixit, M.K. Life Cycle Embodied Energy Analysis of Residential Buildings: A Review of Literature to Investigate Embodied Energy Parameters. Renew. Sustain. Energy Rev. 2017 , 79 , 390–413. [ Google Scholar ] [ CrossRef ]
- Crawford, R.H. Validation of a Hybrid Life-Cycle Inventory Analysis Method. J. Environ. Manag. 2008 , 88 , 496–506. [ Google Scholar ] [ CrossRef ]
- Omar, W.M.S.W. A Hybrid Life Cycle Assessment of Embodied Energy and Carbon Emissions from Conventional and Industrialised Building Systems in Malaysia. Energy Build. 2018 , 167 , 253–268. [ Google Scholar ] [ CrossRef ]
- Treloar, G.J.; Love, P.E.; Holt, G.D. Using National Input/Output Data for Embodied Energy Analysis of Individual Residential Buildings. Constr. Manag. Econ. 2001 , 19 , 49–61. [ Google Scholar ] [ CrossRef ]
- Baird, G.; Alcorn, A.; Haslam, P. The Energy Embodied in Building Materials-Updated New Zealand Coefficients and Their Significance. Trans. Inst. Prof. Eng. New Zealand Civ. Eng. Sect. 1997 , 24 , 46–54. [ Google Scholar ]
- Wang, J.; Yu, C.; Pan, W. Life Cycle Energy of High-Rise Office Buildings in Hong Kong. Energy Build. 2018 , 167 , 152–164. [ Google Scholar ] [ CrossRef ]
- Crawford, R.H.; Hollingsbee, T. 5x4: A Case Study in Low Energy Infill Housing. In Proceedings of the World Sustainable Building Conference, Barcelona, Spain, 28–30 October 2014. [ Google Scholar ]
- Stephan, A.; Crawford, R.H. The Relationship between House Size and Life Cycle Energy Demand: Implications for Energy Efficiency Regulations for Buildings. Energy 2016 , 116 , 1158–1171. [ Google Scholar ] [ CrossRef ]
- Azzouz, A.; Borchers, M.; Moreira, J.; Mavrogianni, A. Life Cycle Assessment of Energy Conservation Measures during Early Stage Office Building Design: A Case Study in London, UK. Energy Build. 2017 , 139 , 547–568. [ Google Scholar ] [ CrossRef ][ Green Version ]
- Wen, T.J.; Siong, H.C.; Noor, Z.Z. Assessment of Embodied Energy and Global Warming Potential of Building Construction Using Life Cycle Analysis Approach: Case Studies of Residential Buildings in Iskandar Malaysia. Energy Build. 2015 , 93 , 295–302. [ Google Scholar ] [ CrossRef ]
- Lolli, N.; Fufa, S.M.; Inman, M. A Parametric Tool for the Assessment of Operational Energy Use, Embodied Energy and Embodied Material Emissions in Building. Energy Procedia 2017 , 111 , 21–30. [ Google Scholar ] [ CrossRef ]
- Monahan, J.; Powell, J.C. An Embodied Carbon and Energy Analysis of Modern Methods of Construction in Housing: A Case Study Using a Lifecycle Assessment Framework. Energy Build. 2011 , 43 , 179–188. [ Google Scholar ] [ CrossRef ]
- Xu, Y.; Liu, H.; Long, Z. A Distributed Computing Framework for Wind Speed Big Data Forecasting on Apache Spark. Sustain. Energy Technol. Assess. 2020 , 37 , 100582. [ Google Scholar ] [ CrossRef ]
- ISO 15686-1:2011 ; Buildings and Constructed—Service Life Planning—Part 1: General Principles. International Organization for Standardization: Geneva, Switzerland, 2011. Available online: https://www.iso.org/cms/render/live/en/sites/isoorg/contents/data/standard/04/57/45798.html (accessed on 10 February 2022).
- Athena Institute; Morrison Hersfield. Service Life Considerations in Relation to Green Building Rating Systems ; Athena Sustainable Materials Institute: Merrickville, ON, Canada, 2006; pp. 1–49. [ Google Scholar ]
- S478-95 (R2007) ; Standard Guideline on Durability in Buildings S478-95 (R2007). Canadian Standards Association: Toronto, ON, Canada, 1995; pp. 1–101.
- Public Works and Government Services Canada. Durability Guidelines for Building Wall Envelopes ; Public Works and Government Services Canada: Toronto, ON, Canada, 1997. [ Google Scholar ]
- ISO 15686-1:2011 ; Buildings and Constructed Assets—Service Life Planning—Part 2 Service Life Prediction Procedures. International Organization for Standardization: Geneva, Switzerland, 2011. Available online: https://www.iso.org/cms/render/live/en/sites/isoorg/contents/data/standard/04/57/45798.html (accessed on 10 February 2022).
- Silva, A.; de Brito, J. Service Life of Building Envelopes: A Critical Literature Review. J. Build. Eng. 2021 , 44 , 102646. [ Google Scholar ] [ CrossRef ]
- Tabet Aoul, K.A.; Hagi, R.; Abdelghani, R.; Syam, M.; Akhozheya, B. Building Envelope Thermal Defects in Existing and Under-Construction Housing in the UAE; Infrared Thermography Diagnosis and Qualitative Impacts Analysis. Sustainability 2021 , 13 , 2230. [ Google Scholar ] [ CrossRef ]
- Huijbregts, M.A. Application of Uncertainty and Variability in LCA. Int. J. Life Cycle Assess. 1998 , 3 , 273–280. [ Google Scholar ] [ CrossRef ]
- Wang, E.; Shen, Z. A Hybrid Data Quality Indicator and Statistical Method for Improving Uncertainty Analysis in LCA of Complex System—Application to the Whole-Building Embodied Energy Analysis. J. Clean. Prod. 2013 , 43 , 166–173. [ Google Scholar ] [ CrossRef ]
- Grant, A.; Ries, R.; Kibert, C. Life Cycle Assessment and Service Life Prediction. J. Ind. Ecol. 2014 , 18 , 187–200. [ Google Scholar ] [ CrossRef ]
- Riahinezhad, M.; Hallman, M.; Masson, J.F. Critical Review of Polymeric Building Envelope Materials: Degradation, Durability and Service Life Prediction. Buildings 2021 , 11 , 299. [ Google Scholar ] [ CrossRef ]
- Xu, Q.; Shi, D.; Shao, W. Service Life Prediction of RC Square Piles Based on Time-Varying Probability Analysis. Constr. Build. Mater. 2019 , 227 , 116824. [ Google Scholar ] [ CrossRef ]
Share and Cite
Rauf, A. Reducing Life Cycle Embodied Energy of Residential Buildings: Importance of Building and Material Service Life. Buildings 2022 , 12 , 1821. https://doi.org/10.3390/buildings12111821
Rauf A. Reducing Life Cycle Embodied Energy of Residential Buildings: Importance of Building and Material Service Life. Buildings . 2022; 12(11):1821. https://doi.org/10.3390/buildings12111821
Rauf, Abdul. 2022. "Reducing Life Cycle Embodied Energy of Residential Buildings: Importance of Building and Material Service Life" Buildings 12, no. 11: 1821. https://doi.org/10.3390/buildings12111821
Article Metrics
Article access statistics, further information, mdpi initiatives, follow mdpi.
Subscribe to receive issue release notifications and newsletters from MDPI journals
- Editing Services Language Editing Scientific Editing Grant Editing new Translation More Services + Response Letter Editing Annual Review & Tenure Files LaTeX Language Editing
- Publication Support Journal Recommendation Manuscript Formatting Figure Formatting Plagiarism Check Conference Poster Plain Language Summary
- Scientific Illustration Journal Cover Design Graphical Abstract Infographic Custom Illustration
- Scientific Videos Video Abstract Explainer Video Scientific Animation
- Ethics and Confidentiality
- Testimonials
- Design Gallery
- Institutional Provider
- Publisher Portal
- Brand Localization
- Journal Selector Tool
- Learning Nexus
Scientific Journal Selector
Case Studies in Construction Materials
APA has partnered with LetPub to provide a full suite of author services.
Free Webinar Series Conversations with a Hindawi Editor
Professional Journal Cover Design
Professionally designed and impactful journal cover art. Delivered fast and consistent with journal guidelines.
Intentional Space Tag
Contact us
Your name *
Your email *
Your message *
Please fill in all fields and provide a valid email.
© 2010-2023 ACCDON LLC 400 5 th Ave, Suite 530, Waltham, MA 02451, USA Privacy • Terms of Service
© 2010-2023 United States: ACCDON LLC Tel: 1-781-202-9968 Email: [email protected]
Address: 400 5 th Ave, Suite 530, Waltham, Massachusetts 02451, United States
- Product Details
- Contact Sales: +1-888-418-1937
- EndNote online login
Output Styles
Case studies in construction materials.
Citation Style: Non-superscripted Number
Date: Friday, November 11, 2016
Discipline: Materials Science
File Name: Case Studies in Construction Materials.ens
Publisher: Elsevier
URL: http://www.elsevier.com/locate/issn/2214-5095
Based On: Elsevier #1 Numbered with article and chapter title
Bibliography Sort Order: Appearance-Order
BibField1: Author
BibField2: Title
BibField3: Journal
Our policy towards the use of cookies
Privacy overview.
Recent searches
Institutions, conferences, journals gallery.
40,000+ journal templates to choose from for your next paper
Flexible pricing plans that caters to everyone’s needs
Lifetime Plan
Buy once and use forever.
Student Yearly Plan
Best for research scholars
Student Monthly Plan
Best for undergraduates
Plagiarism check
Detect plagiarism early. Powered by Turnitin.
Journal Submission
Get accepted in top journals.
For Publishers
Streamline publishing process with automated workflows
Client Stories
Read what our clients have yielded with our products and services
Convert from Word
Word file to JATS XML, PMC XML, DOAJ XML and more
Convert from PDF
PDF file to SciELO XML, CrossRef XML and more
Convert from JATS XML
JATS XML to Redalyc XML, DataCite XML and more
Adhere to standard of all global publishing bodies
Compliance for medical journals in PubMed database
Generate standardized XML for SciELO indexed journals
Case Studies in Construction Materials — Template for authors
— or sign up using email —
Related Journals
Fashion and Textiles
Categories: Cultural Studies, Materials Science (miscellaneous), Social Psychology, Strategy and Management and Marketing +3 more
Journal of Industrial Textiles
Categories: Materials Science (miscellaneous), Polymers and Plastics, Industrial and Manufacturing Engineering and Chemical Engineering (miscellaneous) +2 more
Environmental Science: Nano
Royal Society of Chemistry
Categories: Materials Science (miscellaneous) and Environmental Science (all)
Frontiers in Physics
Frontiers Media
Categories: Mathematical Physics, Materials Science (miscellaneous), Physics and Astronomy (all), Physical and Theoretical Chemistry and Biophysics +3 more
Journal Performance & Insights
17% from 2019
52% from 2019
- CiteRatio of this journal has increased by 38% in last years.
- This journal’s CiteRatio is in the top 10 percentile category.
- SJR of this journal has increased by 17% in last years.
- This journal’s SJR is in the top 10 percentile category.
- SNIP of this journal has increased by 52% in last years.
- This journal’s SNIP is in the top 10 percentile category.
Guideline source: View
All company, product and service names used in this website are for identification purposes only. All product names, trademarks and registered trademarks are property of their respective owners.
Use of these names, trademarks and brands does not imply endorsement or affiliation. Disclaimer Notice
Case Studies in Construction Materials
Approved by publishing and review experts on SciSpace, this template is built as per for Case Studies in Construction Materials formatting guidelines as mentioned in Elsevier author instructions. The current version was created on and has been used by 856 authors to write and format their manuscripts to this journal.
Materials Science
SciSpace is a very innovative solution to the formatting problem and existing providers, such as Mendeley or Word did not really evolve in recent years.
- Andreas Frutiger, Researcher, ETH Zurich, Institute for Biomedical Engineering
(Before submission check for plagiarism via Turnitin)
What to expect from SciSpace?
Speed and accuracy over ms word.
With SciSpace, you do not need a word template for Case Studies in Construction Materials.
It automatically formats your research paper to Elsevier formatting guidelines and citation style.
You can download a submission ready research paper in pdf, LaTeX and docx formats.
Time taken to format a paper and Compliance with guidelines
Plagiarism Reports via Turnitin
SciSpace has partnered with Turnitin, the leading provider of Plagiarism Check software.
Using this service, researchers can compare submissions against more than 170 million scholarly articles, a database of 70+ billion current and archived web pages. How Turnitin Integration works?
Freedom from formatting guidelines
One editor, 100K journal formats – world's largest collection of journal templates
With such a huge verified library, what you need is already there.
Easy support from all your favorite tools
Automatically format and order your citations and bibliography in a click.
SciSpace allows imports from all reference managers like Mendeley, Zotero, Endnote, Google Scholar etc.
Frequently asked questions
1. can i write case studies in construction materials in latex.
Absolutely not! Our tool has been designed to help you focus on writing. You can write your entire paper as per the Case Studies in Construction Materials guidelines and auto format it.
2. Do you follow the Case Studies in Construction Materials guidelines?
Yes, the template is compliant with the Case Studies in Construction Materials guidelines. Our experts at SciSpace ensure that. If there are any changes to the journal's guidelines, we'll change our algorithm accordingly.
3. Can I cite my article in multiple styles in Case Studies in Construction Materials?
Of course! We support all the top citation styles, such as APA style, MLA style, Vancouver style, Harvard style, and Chicago style. For example, when you write your paper and hit autoformat, our system will automatically update your article as per the Case Studies in Construction Materials citation style.
4. Can I use the Case Studies in Construction Materials templates for free?
Sign up for our free trial, and you'll be able to use all our features for seven days. You'll see how helpful they are and how inexpensive they are compared to other options, Especially for Case Studies in Construction Materials.
5. Can I use a manuscript in Case Studies in Construction Materials that I have written in MS Word?
Yes. You can choose the right template, copy-paste the contents from the word document, and click on auto-format. Once you're done, you'll have a publish-ready paper Case Studies in Construction Materials that you can download at the end.
6. How long does it usually take you to format my papers in Case Studies in Construction Materials?
It only takes a matter of seconds to edit your manuscript. Besides that, our intuitive editor saves you from writing and formatting it in Case Studies in Construction Materials.
7. Where can I find the template for the Case Studies in Construction Materials?
It is possible to find the Word template for any journal on Google. However, why use a template when you can write your entire manuscript on SciSpace , auto format it as per Case Studies in Construction Materials's guidelines and download the same in Word, PDF and LaTeX formats? Give us a try!.
8. Can I reformat my paper to fit the Case Studies in Construction Materials's guidelines?
Of course! You can do this using our intuitive editor. It's very easy. If you need help, our support team is always ready to assist you.
9. Case Studies in Construction Materials an online tool or is there a desktop version?
SciSpace's Case Studies in Construction Materials is currently available as an online tool. We're developing a desktop version, too. You can request (or upvote) any features that you think would be helpful for you and other researchers in the "feature request" section of your account once you've signed up with us.
10. I cannot find my template in your gallery. Can you create it for me like Case Studies in Construction Materials?
Sure. You can request any template and we'll have it setup within a few days. You can find the request box in Journal Gallery on the right side bar under the heading, "Couldn't find the format you were looking for like Case Studies in Construction Materials?”
11. What is the output that I would get after using Case Studies in Construction Materials?
After writing your paper autoformatting in Case Studies in Construction Materials, you can download it in multiple formats, viz., PDF, Docx, and LaTeX.
12. Is Case Studies in Construction Materials's impact factor high enough that I should try publishing my article there?
To be honest, the answer is no. The impact factor is one of the many elements that determine the quality of a journal. Few of these factors include review board, rejection rates, frequency of inclusion in indexes, and Eigenfactor. You need to assess all these factors before you make your final call.
13. What is Sherpa RoMEO Archiving Policy for Case Studies in Construction Materials?
- Pre-prints as being the version of the paper before peer review and
- Post-prints as being the version of the paper after peer-review, with revisions having been made.
14. What are the most common citation types In Case Studies in Construction Materials?
15. how do i submit my article to the case studies in construction materials, 16. can i download case studies in construction materials in endnote format.
Yes, SciSpace provides this functionality. After signing up, you would need to import your existing references from Word or Bib file to SciSpace. Then SciSpace would allow you to download your references in Case Studies in Construction Materials Endnote style according to Elsevier guidelines.
with Case Studies in Construction Materials format applied
Fast and reliable, built for complaince.
Instant formatting to 100% publisher guidelines on - SciSpace.
No word template required
Typset automatically formats your research paper to Case Studies in Construction Materials formatting guidelines and citation style.
Verifed journal formats
One editor, 100K journal formats. With the largest collection of verified journal formats, what you need is already there.
Trusted by academicians
I spent hours with MS word for reformatting. It was frustrating - plain and simple. With SciSpace, I can draft my manuscripts and once it is finished I can just submit. In case, I have to submit to another journal it is really just a button click instead of an afternoon of reformatting.
IMAGES
VIDEO
COMMENTS
Case Studies in Construction Materialscovers a wide range of materials and technology including: cement, concrete, reinforcement, bricks and mortars, additives, corrosion technology, ceramics, timber, steel, polymers, glass fibres, recycled materials and by-products, sealants, and adhesives.
Case Studies in Construction Materialscovers a wide range of materials and technology including: cement, concrete, reinforcement, bricks and mortars, additives, corrosion technology, ceramics, timber, steel, polymers, glass fibres, recycled materials and by-products, sealants, and adhesives.
Case Studies in Construction Materials | Vol 16, June 2022 | ScienceDirect.com by Elsevier 5.2 CiteScore 4.934 Impact Factor RSS Submit your article Guide for authors Volume 16 June 2022 Previous vol/issue Next vol/issue Receive an update when the latest issues in this journal are published Sign in to set up alerts Short communicationOpen access
Case Studies in Construction Materials is a peer reviewed, open access journal. User rights. All articles published open access will be immediately and permanently free for everyone to read, download, copy and distribute. Permitted reuse is defined by your choice of one of the following user licenses:
The purpose of this study is to experimentally correlate the compressive strength (f′c) of concrete to the splitting tensile strength (T) for plain concrete in the existence of a construction...
Case Studies in Construction Materials covers a wide range of materials and technology including: cement, concrete, reinforcement, bricks and mortars, additives, corrosion technology, ceramics, timber, steel, polymers, glass fibres, recycled materials and by-products, sealants, and adhesives.
The following timber case studies show how these materials and tools can be masterfully implemented. Karsh Alumni and Visitors Center Architect: Centerbrook Architects Location: Durham, North...
Each case study consists of two documents. The first document is the actual case study to be used by students, and the second document contains notes for the case study instructor or facilitator. 1. Allied Constructors: Ethics in Construction This case study exposes students to situations in construction that require ethical decision-making.
Case Studies in Construction Materials provides a forum for the rapid publication of short, structured Case Studies on construction materials and related Short Communications, and will provide an essential compendium of case studies for practicing engineers, designers, researchers and other practitioners who are interested in all aspects …
Construction materials are inherently carbon-intensive and energy-intensive to manufacture. To bring down the environmental footprint of the construction sector, the existing construction materials can be suitably amended by upcycling the locally available industrial side streams. ... Case studies on industrial waste processing, collection ...
Water absorption of several different frost insulation materials was tested for four years. The test took into account both immersion and frost attack to materials. On the basis of the research...
In our case studies, we offer readers the opportunity to learn more about Aggregates Products, Cement Products, Concrete Products, and Asphalt Products.
Case Studies in Construction Materials Editorial Board ISSN: 2214-5095 Case Studies in Construction Materials Submit your Paper View Articles Guide for authors Track your paper Editorial Board 20 editors and editorial board members in 15 countries/regions CN China (3) NL Netherlands (2) RO Romania (2) GB United Kingdom (2) AU Australia BR Brazil EG
Medius Pay helped Coastal Construction increase the speed and efficiency of processing payments. Since 1975, Coastal Construction has grown to become one of the largest independent distributors of sealants and fireproofing materials in the US. Its product line includes a vast array of waterproofing materials, coatings, safety equipment and tools.
Life cycle embodied energy of a case study house for an assessment period of 150 years was calculated based on minimum, average and maximum material service life values for the building service life of 50, 100 and 150 years.
Scientific Journal Selector Case Studies in Construction Materials 1 Reviews Submit a Review Open Access SCIE Official Website Submission Website Return to Search APA has partnered with LetPub to provide a full suite of author services. Learn more *Review Duration 43 Weeks *Competitiveness CiteScore 5.2 CiteScore Rank PubMed Central
Case Studies in Construction Materials | EndNote Download all styles Back to Styles Case Studies in Construction Materials Citation Style: Non-superscripted Number Date: Friday, November 11, 2016 Discipline: Materials Science File Name: Case Studies in Construction Materials.ens Publisher: Elsevier URL: http://www.elsevier.com/locate/issn/2214-5095
Case Studies in Construction Materials covers a wide range of materials and technology including: cement, concrete, reinforcement, bricks and mortars, additives, corrosion technology, ceramics, timber, steel, polymers, glass fibres, recycled materials and by-products, sealants, and adhesives.
Case Studies in Construction Materials. Approved by publishing and review experts on SciSpace, this template is built as per for Case Studies in Construction Materials formatting guidelines as mentioned in Elsevier author instructions. The current version was created on and has been used by 856 authors to write and format their manuscripts to ...