assignment operators define

cppreference.com

Assignment operators.

Assignment and compound assignment operators are binary operators that modify the variable to their left using the value to their right.

[ edit ] Simple assignment

The simple assignment operator expressions have the form

Assignment performs implicit conversion from the value of rhs to the type of lhs and then replaces the value in the object designated by lhs with the converted value of rhs .

Assignment also returns the same value as what was stored in lhs (so that expressions such as a = b = c are possible). The value category of the assignment operator is non-lvalue (so that expressions such as ( a = b ) = c are invalid).

rhs and lhs must satisfy one of the following:

• both lhs and rhs have compatible struct or union type, or..
• rhs must be implicitly convertible to lhs , which implies
• both lhs and rhs have arithmetic types , in which case lhs may be volatile -qualified or atomic (since C11)
• both lhs and rhs have pointer to compatible (ignoring qualifiers) types, or one of the pointers is a pointer to void, and the conversion would not add qualifiers to the pointed-to type. lhs may be volatile or restrict (since C99) -qualified or atomic (since C11) .
• lhs is a (possibly qualified or atomic (since C11) ) pointer and rhs is a null pointer constant such as NULL or a nullptr_t value (since C23)

[ edit ] Notes

If rhs and lhs overlap in memory (e.g. they are members of the same union), the behavior is undefined unless the overlap is exact and the types are compatible .

Although arrays are not assignable, an array wrapped in a struct is assignable to another object of the same (or compatible) struct type.

The side effect of updating lhs is sequenced after the value computations, but not the side effects of lhs and rhs themselves and the evaluations of the operands are, as usual, unsequenced relative to each other (so the expressions such as i = ++ i ; are undefined)

Assignment strips extra range and precision from floating-point expressions (see FLT_EVAL_METHOD ).

In C++, assignment operators are lvalue expressions, not so in C.

[ edit ] Compound assignment

The compound assignment operator expressions have the form

The expression lhs @= rhs is exactly the same as lhs = lhs @ ( rhs ) , except that lhs is evaluated only once.

[ edit ] References

• C17 standard (ISO/IEC 9899:2018):
• 6.5.16 Assignment operators (p: 72-73)
• C11 standard (ISO/IEC 9899:2011):
• 6.5.16 Assignment operators (p: 101-104)
• C99 standard (ISO/IEC 9899:1999):
• 6.5.16 Assignment operators (p: 91-93)
• C89/C90 standard (ISO/IEC 9899:1990):
• 3.3.16 Assignment operators

[ edit ] See Also

Operator precedence

[ edit ] See also

• Recent changes
• Offline version
• What links here
• Related changes
• Upload file
• Special pages
• Printable version
• Permanent link
• Page information
• In other languages
• This page was last modified on 19 August 2022, at 08:36.
• This page has been accessed 54,567 times.
• Privacy policy
• About cppreference.com
• Disclaimers

C++ Tutorial

C++ functions, c++ classes, c++ examples, c++ assignment operators, assignment operators.

Assignment operators are used to assign values to variables.

In the example below, we use the assignment operator ( = ) to assign the value 10 to a variable called x :

The addition assignment operator ( += ) adds a value to a variable:

A list of all assignment operators:

COLOR PICKER

Report Error

If you want to report an error, or if you want to make a suggestion, do not hesitate to send us an e-mail:

[email protected]

Top Tutorials

Top references, top examples, get certified.

• C Programming Tutorial
• C - Overview
• C - Features
• C - History
• C - Environment Setup
• C - Program Structure
• C - Hello World
• C - Compilation Process
• C - Comments
• C - Keywords
• C - Identifiers
• C - User Input
• C - Basic Syntax
• C - Data Types
• C - Variables
• C - Integer Promotions
• C - Type Conversion
• C - Constants
• C - Literals
• C - Escape sequences
• C - Format Specifiers
• C - Storage Classes
• C - Operators
• C - Decision Making
• C - if statement
• C - if...else statement
• C - nested if statements
• C - switch statement
• C - nested switch statements
• C - While loop
• C - Functions
• C - Main Functions
• C - Return Statement
• C - Scope Rules
• C - Properties of Array
• C - Multi-Dimensional Arrays
• C - Passing Arrays to Function
• C - Return Array from Function
• C - Variable Length Arrays
• C - Pointers
• C - Pointer Arithmetics
• C - Passing Pointers to Functions
• C - Strings
• C - Array of Strings
• C - Structures
• C - Structures and Functions
• C - Arrays of Structures
• C - Pointers to Structures
• C - Self-Referential Structures
• C - Nested Structures
• C - Bit Fields
• C - Typedef
• C - Input & Output
• C - File I/O
• C - Preprocessors
• C - Header Files
• C - Type Casting
• C - Error Handling
• C - Recursion
• C - Variable Arguments
• C - Memory Management
• C - Command Line Arguments
• C Programming Resources
• C - Questions & Answers
• C - Quick Guide
• C - Useful Resources
• C - Discussion
• Selected Reading
• UPSC IAS Exams Notes
• Developer's Best Practices
• Questions and Answers
• Effective Resume Writing
• HR Interview Questions
• Computer Glossary

Assignment Operators in C

In C, the assignment operator stores a certain value in an already declared variable. A variable in C can be assigned the value in the form of a literal, another variable or an expression. The value to be assigned forms the right hand operand, whereas the variable to be assigned should be the operand to the left of = symbol, which is defined as a simple assignment operator in C. In addition, C has several augmented assignment operators.

The following table lists the assignment operators supported by the C language −

Simple assignment operator (=)

The = operator is the most frequently used operator in C. As per ANSI C standard, all the variables must be declared in the beginning. Variable declaration after the first processing statement is not allowed. You can declare a variable to be assigned a value later in the code, or you can initialize it at the time of declaration.

You can use a literal, another variable or an expression in the assignment statement.

Once a variable of a certain type is declared, it cannot be assigned a value of any other type. In such a case the C compiler reports a type mismatch error.

In C, the expressions that refer to a memory location are called "lvalue" expressions. A lvalue may appear as either the left-hand or right-hand side of an assignment.

On the other hand, the term rvalue refers to a data value that is stored at some address in memory. A rvalue is an expression that cannot have a value assigned to it which means an rvalue may appear on the right-hand side but not on the left-hand side of an assignment.

Variables are lvalues and so they may appear on the left-hand side of an assignment. Numeric literals are rvalues and so they may not be assigned and cannot appear on the left-hand side. Take a look at the following valid and invalid statements −

Augmented assignment operators

In addition to the = operator, C allows you to combine arithmetic and bitwise operators with the = symbol to form augmented or compound assignment operator. The augmented operators offer a convenient shortcut for combining arithmetic or bitwise operation with assignment.

For example, the expression a+=b has the same effect of performing a+b first and then assigning the result back to the variable a.

Similarly, the expression a<<=b has the same effect of performing a<<b first and then assigning the result back to the variable a.

Here is a C program that demonstrates the use of assignment operators in C:

When you compile and execute the above program, it produces the following result −

Assignment operators

Assignment operators modify the value of the object.

Explanation

copy assignment operator replaces the contents of the object a with a copy of the contents of b ( b is not modified). For class types, this is a special member function, described in copy assignment operator .

move assignment operator replaces the contents of the object a with the contents of b , avoiding copying if possible ( b may be modified). For class types, this is a special member function, described in move assignment operator . (since C++11)

For non-class types, copy and move assignment are indistinguishable and are referred to as direct assignment .

compound assignment operators replace the contents of the object a with the result of a binary operation between the previous value of a and the value of b .

Builtin direct assignment

The direct assignment expressions have the form

For the built-in operator, lhs may have any non-const scalar type and rhs must be implicitly convertible to the type of lhs .

The direct assignment operator expects a modifiable lvalue as its left operand and an rvalue expression or a braced-init-list (since C++11) as its right operand, and returns an lvalue identifying the left operand after modification.

For non-class types, the right operand is first implicitly converted to the cv-unqualified type of the left operand, and then its value is copied into the object identified by left operand.

When the left operand has reference type, the assignment operator modifies the referred-to object.

If the left and the right operands identify overlapping objects, the behavior is undefined (unless the overlap is exact and the type is the same)

In overload resolution against user-defined operators , for every type T , the following function signatures participate in overload resolution:

For every enumeration or pointer to member type T , optionally volatile-qualified, the following function signature participates in overload resolution:

For every pair A1 and A2, where A1 is an arithmetic type (optionally volatile-qualified) and A2 is a promoted arithmetic type, the following function signature participates in overload resolution:

Builtin compound assignment

The compound assignment expressions have the form

The behavior of every builtin compound-assignment expression E1 op = E2 (where E1 is a modifiable lvalue expression and E2 is an rvalue expression or a braced-init-list (since C++11) ) is exactly the same as the behavior of the expression E1 = E1 op E2 , except that the expression E1 is evaluated only once and that it behaves as a single operation with respect to indeterminately-sequenced function calls (e.g. in f ( a + = b, g ( ) ) , the += is either not started at all or is completed as seen from inside g ( ) ).

In overload resolution against user-defined operators , for every pair A1 and A2, where A1 is an arithmetic type (optionally volatile-qualified) and A2 is a promoted arithmetic type, the following function signatures participate in overload resolution:

For every pair I1 and I2, where I1 is an integral type (optionally volatile-qualified) and I2 is a promoted integral type, the following function signatures participate in overload resolution:

For every optionally cv-qualified object type T , the following function signatures participate in overload resolution:

Operator precedence

Operator overloading

• school Campus Bookshelves
• menu_book Bookshelves
• perm_media Learning Objects
• login Login
• how_to_reg Request Instructor Account
• hub Instructor Commons
• Download Page (PDF)
• Download Full Book (PDF)
• Periodic Table
• Physics Constants
• Scientific Calculator
• Reference & Cite
• Tools expand_more
• Readability

selected template will load here

This action is not available.

4.5: Assignment Operator

• Last updated
• Save as PDF
• Page ID 10258

• Kenneth Leroy Busbee
• Houston Community College via OpenStax CNX

The assignment operator allows us to change the value of a modifiable data object (for beginning programmers this typically means a variable). It is associated with the concept of moving a value into the storage location (again usually a variable). Within C++ programming language the symbol used is the equal symbol. But bite your tongue, when you see the = symbol you need to start thinking: assignment. The assignment operator has two operands. The one to the left of the operator is usually an identifier name for a variable. The one to the right of the operator is a value.

The value 21 is moved to the memory location for the variable named: age. Another way to say it: age is assigned the value 21.

The item to the right of the assignment operator is an expression. The expression will be evaluated and the answer is 14. The value 14 would assigned to the variable named: total_cousins.

The expression to the right of the assignment operator contains some identifier names. The program would fetch the values stored in those variables; add them together and get a value of 44; then assign the 44 to the total_students variable.

Definitions

This browser is no longer supported.

Upgrade to Microsoft Edge to take advantage of the latest features, security updates, and technical support.

C Assignment Operators

• 6 contributors

An assignment operation assigns the value of the right-hand operand to the storage location named by the left-hand operand. Therefore, the left-hand operand of an assignment operation must be a modifiable l-value. After the assignment, an assignment expression has the value of the left operand but isn't an l-value.

assignment-expression :   conditional-expression   unary-expression assignment-operator assignment-expression

assignment-operator : one of   = *= /= %= += -= <<= >>= &= ^= |=

The assignment operators in C can both transform and assign values in a single operation. C provides the following assignment operators:

In assignment, the type of the right-hand value is converted to the type of the left-hand value, and the value is stored in the left operand after the assignment has taken place. The left operand must not be an array, a function, or a constant. The specific conversion path, which depends on the two types, is outlined in detail in Type Conversions .

• Assignment Operators

Was this page helpful?

Coming soon: Throughout 2024 we will be phasing out GitHub Issues as the feedback mechanism for content and replacing it with a new feedback system. For more information see: https://aka.ms/ContentUserFeedback .

Submit and view feedback for

Additional resources

• Sign In / Suggest an Article

Current ISO C++ status

Upcoming ISO C++ meetings

Upcoming C++ conferences

Compiler conformance status

ISO C++ committee meeting

March 18-23, Tokyo, Japan

April 17-20, Bristol, UK

using std::cpp 2024

April 24-26, Leganes, Spain  

C++ Now 2024

May 7-12, Aspen, CO, USA

June 24-29, St. Louis, MO, USA

July 2-5, Folkestone, Kent, UK

assignment operators

Assignment operators, what is “self assignment”.

Self assignment is when someone assigns an object to itself. For example,

Obviously no one ever explicitly does a self assignment like the above, but since more than one pointer or reference can point to the same object (aliasing), it is possible to have self assignment without knowing it:

This is only valid for copy assignment. Self-assignment is not valid for move assignment.

Why should I worry about “self assignment”?

If you don’t worry about self assignment , you’ll expose your users to some very subtle bugs that have very subtle and often disastrous symptoms. For example, the following class will cause a complete disaster in the case of self-assignment:

If someone assigns a Fred object to itself, line #1 deletes both this->p_ and f.p_ since *this and f are the same object. But line #2 uses *f.p_ , which is no longer a valid object. This will likely cause a major disaster.

The bottom line is that you the author of class Fred are responsible to make sure self-assignment on a Fred object is innocuous . Do not assume that users won’t ever do that to your objects. It is your fault if your object crashes when it gets a self-assignment.

Aside: the above Fred::operator= (const Fred&) has a second problem: If an exception is thrown while evaluating new Wilma(*f.p_) (e.g., an out-of-memory exception or an exception in Wilma ’s copy constructor ), this->p_ will be a dangling pointer — it will point to memory that is no longer valid. This can be solved by allocating the new objects before deleting the old objects.

Okay, okay, already; I’ll handle self-assignment. How do I do it?

You should worry about self assignment every time you create a class . This does not mean that you need to add extra code to all your classes: as long as your objects gracefully handle self assignment, it doesn’t matter whether you had to add extra code or not.

We will illustrate the two cases using the assignment operator in the previous FAQ :

If self-assignment can be handled without any extra code, don’t add any extra code. But do add a comment so others will know that your assignment operator gracefully handles self-assignment:

Example 1a:

Example 1b:

If you need to add extra code to your assignment operator, here’s a simple and effective technique:

Or equivalently:

By the way: the goal is not to make self-assignment fast. If you don’t need to explicitly test for self-assignment, for example, if your code works correctly (even if slowly) in the case of self-assignment, then do not put an if test in your assignment operator just to make the self-assignment case fast. The reason is simple: self-assignment is almost always rare, so it merely needs to be correct - it does not need to be efficient. Adding the unnecessary if statement would make a rare case faster by adding an extra conditional-branch to the normal case, punishing the many to benefit the few.

In this case, however, you should add a comment at the top of your assignment operator indicating that the rest of the code makes self-assignment is benign, and that is why you didn’t explicitly test for it. That way future maintainers will know to make sure self-assignment stays benign, or if not, they will need to add the if test.

I’m creating a derived class; should my assignment operators call my base class’s assignment operators?

Yes (if you need to define assignment operators in the first place).

If you define your own assignment operators, the compiler will not automatically call your base class’s assignment operators for you. Unless your base class’s assignment operators themselves are broken, you should call them explicitly from your derived class’s assignment operators (again, assuming you create them in the first place).

However if you do not create your own assignment operators, the ones that the compiler create for you will automatically call your base class’s assignment operators.

Please Login to submit a recommendation.

If you don’t have an account, you can register for free.

• Skip to main content
• Select language
• Skip to search
• Assignment operators

An assignment operator assigns a value to its left operand based on the value of its right operand.

The basic assignment operator is equal ( = ), which assigns the value of its right operand to its left operand. That is, x = y assigns the value of y to x . The other assignment operators are usually shorthand for standard operations, as shown in the following definitions and examples.

Simple assignment operator which assigns a value to a variable. The assignment operation evaluates to the assigned value. Chaining the assignment operator is possible in order to assign a single value to multiple variables. See the example.

Addition assignment

The addition assignment operator adds the value of the right operand to a variable and assigns the result to the variable. The types of the two operands determine the behavior of the addition assignment operator. Addition or concatenation is possible. See the addition operator for more details.

Subtraction assignment

The subtraction assignment operator subtracts the value of the right operand from a variable and assigns the result to the variable. See the subtraction operator for more details.

Multiplication assignment

The multiplication assignment operator multiplies a variable by the value of the right operand and assigns the result to the variable. See the multiplication operator for more details.

Division assignment

The division assignment operator divides a variable by the value of the right operand and assigns the result to the variable. See the division operator for more details.

Remainder assignment

The remainder assignment operator divides a variable by the value of the right operand and assigns the remainder to the variable. See the remainder operator for more details.

Exponentiation assignment

This is an experimental technology, part of the ECMAScript 2016 (ES7) proposal. Because this technology's specification has not stabilized, check the compatibility table for usage in various browsers. Also note that the syntax and behavior of an experimental technology is subject to change in future version of browsers as the spec changes.

The exponentiation assignment operator evaluates to the result of raising first operand to the power second operand. See the exponentiation operator for more details.

Left shift assignment

The left shift assignment operator moves the specified amount of bits to the left and assigns the result to the variable. See the left shift operator for more details.

Right shift assignment

The right shift assignment operator moves the specified amount of bits to the right and assigns the result to the variable. See the right shift operator for more details.

Unsigned right shift assignment

The unsigned right shift assignment operator moves the specified amount of bits to the right and assigns the result to the variable. See the unsigned right shift operator for more details.

Bitwise AND assignment

The bitwise AND assignment operator uses the binary representation of both operands, does a bitwise AND operation on them and assigns the result to the variable. See the bitwise AND operator for more details.

Bitwise XOR assignment

The bitwise XOR assignment operator uses the binary representation of both operands, does a bitwise XOR operation on them and assigns the result to the variable. See the bitwise XOR operator for more details.

Bitwise OR assignment

The bitwise OR assignment operator uses the binary representation of both operands, does a bitwise OR operation on them and assigns the result to the variable. See the bitwise OR operator for more details.

Left operand with another assignment operator

In unusual situations, the assignment operator (e.g. x += y ) is not identical to the meaning expression (here x = x + y ). When the left operand of an assignment operator itself contains an assignment operator, the left operand is evaluated only once. For example:

Specifications

Browser compatibility.

• Arithmetic operators

Document Tags and Contributors

• JavaScript basics
• JavaScript first steps
• JavaScript building blocks
• Introducing JavaScript objects
• Introduction
• Grammar and types
• Control flow and error handling
• Loops and iteration
• Expressions and operators
• Numbers and dates
• Text formatting
• Regular expressions
• Indexed collections
• Keyed collections
• Working with objects
• Details of the object model
• Iterators and generators
• Meta programming
• A re-introduction to JavaScript
• JavaScript data structures
• Equality comparisons and sameness
• Inheritance and the prototype chain
• Strict mode
• JavaScript typed arrays
• Memory Management
• Concurrency model and Event Loop
• References:
• ArrayBuffer
• AsyncFunction
• Float32Array
• Float64Array
• GeneratorFunction
• InternalError
• Intl.Collator
• Intl.DateTimeFormat
• Intl.NumberFormat
• ParallelArray
• ReferenceError
• SIMD.Bool16x8
• SIMD.Bool32x4
• SIMD.Bool64x2
• SIMD.Bool8x16
• SIMD.Float32x4
• SIMD.Float64x2
• SIMD.Int16x8
• SIMD.Int32x4
• SIMD.Int8x16
• SIMD.Uint16x8
• SIMD.Uint32x4
• SIMD.Uint8x16
• SharedArrayBuffer
• StopIteration
• SyntaxError
• Uint16Array
• Uint32Array
• Uint8ClampedArray
• WebAssembly
• decodeURI()
• decodeURIComponent()
• encodeURI()
• encodeURIComponent()
• parseFloat()
• Array comprehensions
• Bitwise operators
• Comma operator
• Comparison operators
• Conditional (ternary) Operator
• Destructuring assignment
• Expression closures
• Generator comprehensions
• Grouping operator
• Legacy generator function expression
• Logical Operators
• Object initializer
• Operator precedence
• Property accessors
• Spread syntax
• async function expression
• class expression
• delete operator
• function expression
• function* expression
• in operator
• new operator
• void operator
• Legacy generator function
• async function
• for each...in
• function declaration
• try...catch
• Arguments object
• Arrow functions
• Default parameters
• Method definitions
• Rest parameters
• constructor
• element loaded from a different domain for which you violated the same-origin policy.">Error: Permission denied to access property "x"
• InternalError: too much recursion
• RangeError: argument is not a valid code point
• RangeError: invalid array length
• RangeError: invalid date
• RangeError: precision is out of range
• RangeError: radix must be an integer
• RangeError: repeat count must be less than infinity
• RangeError: repeat count must be non-negative
• ReferenceError: "x" is not defined
• ReferenceError: assignment to undeclared variable "x"
• ReferenceError: deprecated caller or arguments usage
• ReferenceError: invalid assignment left-hand side
• ReferenceError: reference to undefined property "x"
• SyntaxError: "0"-prefixed octal literals and octal escape seq. are deprecated
• SyntaxError: "use strict" not allowed in function with non-simple parameters
• SyntaxError: "x" is a reserved identifier
• SyntaxError: JSON.parse: bad parsing
• SyntaxError: Malformed formal parameter
• SyntaxError: Unexpected token
• SyntaxError: Using //@ to indicate sourceURL pragmas is deprecated. Use //# instead
• SyntaxError: a declaration in the head of a for-of loop can't have an initializer
• SyntaxError: applying the 'delete' operator to an unqualified name is deprecated
• SyntaxError: for-in loop head declarations may not have initializers
• SyntaxError: function statement requires a name
• SyntaxError: identifier starts immediately after numeric literal
• SyntaxError: illegal character
• SyntaxError: invalid regular expression flag "x"
• SyntaxError: missing ) after argument list
• SyntaxError: missing ) after condition
• SyntaxError: missing : after property id
• SyntaxError: missing ; before statement
• SyntaxError: missing = in const declaration
• SyntaxError: missing ] after element list
• SyntaxError: missing formal parameter
• SyntaxError: missing name after . operator
• SyntaxError: missing variable name
• SyntaxError: missing } after function body
• SyntaxError: missing } after property list
• SyntaxError: redeclaration of formal parameter "x"
• SyntaxError: return not in function
• SyntaxError: test for equality (==) mistyped as assignment (=)?
• SyntaxError: unterminated string literal
• TypeError: "x" has no properties
• TypeError: "x" is (not) "y"
• TypeError: "x" is not a constructor
• TypeError: "x" is not a function
• TypeError: "x" is not a non-null object
• TypeError: "x" is read-only
• TypeError: More arguments needed
• TypeError: can't access dead object
• TypeError: can't define property "x": "obj" is not extensible
• TypeError: can't redefine non-configurable property "x"
• TypeError: cyclic object value
• TypeError: invalid 'in' operand "x"
• TypeError: invalid Array.prototype.sort argument
• TypeError: invalid arguments
• TypeError: invalid assignment to const "x"
• TypeError: property "x" is non-configurable and can't be deleted
• TypeError: setting getter-only property "x"
• TypeError: variable "x" redeclares argument
• URIError: malformed URI sequence
• Warning: -file- is being assigned a //# sourceMappingURL, but already has one
• Warning: 08/09 is not a legal ECMA-262 octal constant
• Warning: Date.prototype.toLocaleFormat is deprecated
• Warning: JavaScript 1.6's for-each-in loops are deprecated
• Warning: String.x is deprecated; use String.prototype.x instead
• Warning: expression closures are deprecated
• Warning: unreachable code after return statement
• JavaScript technologies overview
• Lexical grammar
• Enumerability and ownership of properties
• Iteration protocols
• Transitioning to strict mode
• Template literals
• Deprecated features
• ECMAScript 2015 support in Mozilla
• ECMAScript 5 support in Mozilla
• ECMAScript Next support in Mozilla
• Firefox JavaScript changelog
• New in JavaScript 1.1
• New in JavaScript 1.2
• New in JavaScript 1.3
• New in JavaScript 1.4
• New in JavaScript 1.5
• New in JavaScript 1.6
• New in JavaScript 1.7
• New in JavaScript 1.8
• New in JavaScript 1.8.1
• New in JavaScript 1.8.5
• Documentation:
• All pages index
• Methods index
• Properties index
• Pages tagged "JavaScript"
• JavaScript doc status
• The MDN project

PrepBytes Blog

ONE-STOP RESOURCE FOR EVERYTHING RELATED TO CODING

Sign in to your account

Forgot your password?

Login via OTP

We will send you an one time password on your mobile number

An OTP has been sent to your mobile number please verify it below

Register with PrepBytes

Assignment operator in c.

Last Updated on June 23, 2023 by Prepbytes

This type of operator is employed for transforming and assigning values to variables within an operation. In an assignment operation, the right side represents a value, while the left side corresponds to a variable. It is essential that the value on the right side has the same data type as the variable on the left side. If this requirement is not fulfilled, the compiler will issue an error.

What is Assignment Operator in C language?

In C, the assignment operator serves the purpose of assigning a value to a variable. It is denoted by the equals sign (=) and plays a vital role in storing data within variables for further utilization in code. When using the assignment operator, the value present on the right-hand side is assigned to the variable on the left-hand side. This fundamental operation allows developers to store and manipulate data effectively throughout their programs.

Example of Assignment Operator in C

For example, consider the following line of code:

Types of Assignment Operators in C

Here is a list of the assignment operators that you can find in the C language:

Simple assignment operator (=): This is the basic assignment operator, which assigns the value on the right-hand side to the variable on the left-hand side.

Addition assignment operator (+=): This operator adds the value on the right-hand side to the variable on the left-hand side and assigns the result back to the variable.

x += 3; // Equivalent to x = x + 3; (adds 3 to the current value of "x" and assigns the result back to "x")

Subtraction assignment operator (-=): This operator subtracts the value on the right-hand side from the variable on the left-hand side and assigns the result back to the variable.

x -= 4; // Equivalent to x = x – 4; (subtracts 4 from the current value of "x" and assigns the result back to "x")

* Multiplication assignment operator ( =):** This operator multiplies the value on the right-hand side with the variable on the left-hand side and assigns the result back to the variable.

x = 2; // Equivalent to x = x 2; (multiplies the current value of "x" by 2 and assigns the result back to "x")

Division assignment operator (/=): This operator divides the variable on the left-hand side by the value on the right-hand side and assigns the result back to the variable.

x /= 2; // Equivalent to x = x / 2; (divides the current value of "x" by 2 and assigns the result back to "x")

Bitwise AND assignment (&=): The bitwise AND assignment operator "&=" performs a bitwise AND operation between the value on the left-hand side and the value on the right-hand side. It then assigns the result back to the left-hand side variable.

x &= 3; // Binary: 0011 // After bitwise AND assignment: x = 1 (Binary: 0001)

Bitwise OR assignment (|=): The bitwise OR assignment operator "|=" performs a bitwise OR operation between the value on the left-hand side and the value on the right-hand side. It then assigns the result back to the left-hand side variable.

x |= 3; // Binary: 0011 // After bitwise OR assignment: x = 7 (Binary: 0111)

Bitwise XOR assignment (^=): The bitwise XOR assignment operator "^=" performs a bitwise XOR operation between the value on the left-hand side and the value on the right-hand side. It then assigns the result back to the left-hand side variable.

x ^= 3; // Binary: 0011 // After bitwise XOR assignment: x = 6 (Binary: 0110)

Left shift assignment (<<=): The left shift assignment operator "<<=" shifts the bits of the value on the left-hand side to the left by the number of positions specified by the value on the right-hand side. It then assigns the result back to the left-hand side variable.

x <<= 2; // Binary: 010100 (Shifted left by 2 positions) // After left shift assignment: x = 20 (Binary: 10100)

Right shift assignment (>>=): The right shift assignment operator ">>=" shifts the bits of the value on the left-hand side to the right by the number of positions specified by the value on the right-hand side. It then assigns the result back to the left-hand side variable.

x >>= 2; // Binary: 101 (Shifted right by 2 positions) // After right shift assignment: x = 5 (Binary: 101)

Conclusion The assignment operator in C, denoted by the equals sign (=), is used to assign a value to a variable. It is a fundamental operation that allows programmers to store data in variables for further use in their code. In addition to the simple assignment operator, C provides compound assignment operators that combine arithmetic or bitwise operations with assignment, allowing for concise and efficient code.

FAQs related to Assignment Operator in C

Q1. Can I assign a value of one data type to a variable of another data type? In most cases, assigning a value of one data type to a variable of another data type will result in a warning or error from the compiler. It is generally recommended to assign values of compatible data types to variables.

Q2. What is the difference between the assignment operator (=) and the comparison operator (==)? The assignment operator (=) is used to assign a value to a variable, while the comparison operator (==) is used to check if two values are equal. It is important not to confuse these two operators.

Q3. Can I use multiple assignment operators in a single statement? No, it is not possible to use multiple assignment operators in a single statement. Each assignment operator should be used separately for assigning values to different variables.

Q4. Are there any limitations on the right-hand side value of the assignment operator? The right-hand side value of the assignment operator should be compatible with the data type of the left-hand side variable. If the data types are not compatible, it may lead to unexpected behavior or compiler errors.

Q5. Can I assign the result of an expression to a variable using the assignment operator? Yes, it is possible to assign the result of an expression to a variable using the assignment operator. For example, x = y + z; assigns the sum of y and z to the variable x.

Q6. What happens if I assign a value to an uninitialized variable? Assigning a value to an uninitialized variable will initialize it with the assigned value. However, it is considered good practice to explicitly initialize variables before using them to avoid potential bugs or unintended behavior.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Linked List
• Segment Tree
• Backtracking
• Dynamic Programming
• Greedy Algorithm
• Operating System
• Company Placement
• Interview Tips
• General Interview Questions
• Data Structure
• Other Topics
• Computational Geometry
• Game Theory

Related Post

Null character in c, ackermann function in c, median of two sorted arrays of different size in c, number is palindrome or not in c, implementation of queue using linked list in c, c program to replace a substring in a string.

• Skip to main content
• Select language
• Skip to search
• Add a translation
• Print this page
• Assignment operators

An assignment operator assigns a value to its left operand based on the value of its right operand.

The basic assignment operator is equal ( = ), which assigns the value of its right operand to its left operand. That is, x = y assigns the value of y to x . The other assignment operators are usually shorthand for standard operations, as shown in the following definitions and examples.

Simple assignment operator which assigns a value to a variable. Chaining the assignment operator is possible in order to assign a single value to multiple variables. See the example.

Addition assignment

The addition assignment operator adds the value of the right operand to a variable and assigns the result to the variable. The types of the two operands determine the behavior of the addition assignment operator. Addition or concatenation is possible. See the addition operator for more details.

Subtraction assignment

The subtraction assignment operator subtracts the value of the right operand from a variable and assigns the result to the variable. See the subtraction operator for more details.

Multiplication assignment

The multiplication assignment operator multiplies a variable by the value of the right operand and assigns the result to the variable. See the multiplication operator for more details.

Division assignment

The division assignment operator divides a variable by the value of the right operand and assigns the result to the variable. See the division operator for more details.

Remainder assignment

The remainder assignment operator divides a variable by the value of the right operand and assigns the remainder to the variable. See the remainder operator for more details.

Left shift assignment

The left shift assignment operator moves the specified amount of bits to the left and assigns the result to the variable. See the left shift operator for more details.

Right shift assignment

The right shift assignment operator moves the specified amount of bits to the right and assigns the result to the variable. See the right shift operator for more details.

Unsigned right shift assignment

The unsigned right shift assignment operator moves the specified amount of bits to the right and assigns the result to the variable. See the unsigned right shift operator for more details.

Bitwise AND assignment

The bitwise AND assignment operator uses the binary representation of both operands, does a bitwise AND operation on them and assigns the result to the variable. See the bitwise AND operator for more details.

Bitwise XOR assignment

The bitwise XOR assignment operator uses the binary representation of both operands, does a bitwise XOR operation on them and assigns the result to the variable. See the bitwise XOR operator for more details.

Bitwise OR assignment

The bitwise OR assignment operator uses the binary representation of both operands, does a bitwise OR operation on them and assigns the result to the variable. See the bitwise OR operator for more details.

Left operand with another assignment operator

In unusual situations, the assignment operator (e.g. x += y ) is not identical to the meaning expression (here x = x + y ). When the left operand of an assignment operator itself contains an assignment operator, the left operand is evaluated only once. For example:

Specifications

Browser compatibility.

• Arithmetic operators

Specifications

Browser compatibility.

An assignment operator assigns a value to its left operand based on the value of its right operand.

The source for this interactive example is stored in a GitHub repository. If you'd like to contribute to the interactive examples project, please clone https://github.com/mdn/interactive-examples and send us a pull request.

The basic assignment operator is equal ( = ), which assigns the value of its right operand to its left operand. That is, x = y assigns the value of y to x . The other assignment operators are usually shorthand for standard operations, as shown in the following definitions and examples.

Simple assignment operator is used to assign a value to a variable. The assignment operation evaluates to the assigned value. Chaining the assignment operator is possible in order to assign a single value to multiple variables. See the example.

Addition assignment

The addition assignment operator adds the value of the right operand to a variable and assigns the result to the variable. The types of the two operands determine the behavior of the addition assignment operator. Addition or concatenation is possible. See the addition operator for more details.

Subtraction assignment

The subtraction assignment operator subtracts the value of the right operand from a variable and assigns the result to the variable. See the subtraction operator for more details.

Multiplication assignment

The multiplication assignment operator multiplies a variable by the value of the right operand and assigns the result to the variable. See the multiplication operator for more details.

Division assignment

The division assignment operator divides a variable by the value of the right operand and assigns the result to the variable. See the division operator for more details.

Remainder assignment

The remainder assignment operator divides a variable by the value of the right operand and assigns the remainder to the variable. See the remainder operator for more details.

Exponentiation assignment

The exponentiation assignment operator evaluates to the result of raising first operand to the power second operand. See the exponentiation operator for more details.

Left shift assignment

The left shift assignment operator moves the specified amount of bits to the left and assigns the result to the variable. See the left shift operator for more details.

Right shift assignment

The right shift assignment operator moves the specified amount of bits to the right and assigns the result to the variable. See the right shift operator for more details.

Unsigned right shift assignment

The unsigned right shift assignment operator moves the specified amount of bits to the right and assigns the result to the variable. See the unsigned right shift operator for more details.

Bitwise AND assignment

The bitwise AND assignment operator uses the binary representation of both operands, does a bitwise AND operation on them and assigns the result to the variable. See the bitwise AND operator for more details.

Bitwise XOR assignment

The bitwise XOR assignment operator uses the binary representation of both operands, does a bitwise XOR operation on them and assigns the result to the variable. See the bitwise XOR operator for more details.

Bitwise OR assignment

The bitwise OR assignment operator uses the binary representation of both operands, does a bitwise OR operation on them and assigns the result to the variable. See the bitwise OR operator for more details.

Left operand with another assignment operator

In unusual situations, the assignment operator (e.g. x += y ) is not identical to the meaning expression (here x = x + y ). When the left operand of an assignment operator itself contains an assignment operator, the left operand is evaluated only once. For example:

• Arithmetic operators

Document Tags and Contributors

• JavaScript basics
• JavaScript first steps
• JavaScript building blocks
• Introducing JavaScript objects
• Introduction
• Grammar and types
• Control flow and error handling
• Loops and iteration
• Expressions and operators
• Numbers and dates
• Text formatting
• Regular expressions
• Indexed collections
• Keyed collections
• Working with objects
• Details of the object model
• Using promises
• Iterators and generators
• Meta programming
• JavaScript modules
• Client-side web APIs
• A re-introduction to JavaScript
• JavaScript data structures
• Equality comparisons and sameness
• Inheritance and the prototype chain
• Strict mode
• JavaScript typed arrays
• Memory Management
• Concurrency model and Event Loop
• References:
• ArrayBuffer
• AsyncFunction
• Float32Array
• Float64Array
• GeneratorFunction
• InternalError
• Intl.Collator
• Intl.DateTimeFormat
• Intl.ListFormat
• Intl.Locale
• Intl.NumberFormat
• Intl.PluralRules
• Intl.RelativeTimeFormat
• ReferenceError
• SharedArrayBuffer
• SyntaxError
• Uint16Array
• Uint32Array
• Uint8ClampedArray
• WebAssembly
• decodeURI()
• decodeURIComponent()
• encodeURI()
• encodeURIComponent()
• parseFloat()
• Array comprehensions
• Bitwise operators
• Comma operator
• Comparison operators
• Conditional (ternary) operator
• Destructuring assignment
• Expression closures
• Generator comprehensions
• Grouping operator
• Legacy generator function expression
• Logical operators
• Object initializer
• Operator precedence
• (currently at stage 1) pipes the value of an expression into a function. This allows the creation of chained function calls in a readable manner. The result is syntactic sugar in which a function call with a single argument can be written like this:">Pipeline operator
• Property accessors
• Spread syntax
• async function expression
• class expression
• delete operator
• function expression
• function* expression
• in operator
• new operator
• void operator
• Legacy generator function
• async function
• for await...of
• for each...in
• function declaration
• import.meta
• try...catch
• Arrow functions
• Default parameters
• Method definitions
• Rest parameters
• The arguments object
• constructor
• element loaded from a different domain for which you violated the same-origin policy.">Error: Permission denied to access property "x"
• InternalError: too much recursion
• RangeError: argument is not a valid code point
• RangeError: invalid array length
• RangeError: invalid date
• RangeError: precision is out of range
• RangeError: radix must be an integer
• RangeError: repeat count must be less than infinity
• RangeError: repeat count must be non-negative
• ReferenceError: "x" is not defined
• ReferenceError: assignment to undeclared variable "x"
• ReferenceError: can't access lexical declaration`X' before initialization
• ReferenceError: deprecated caller or arguments usage
• ReferenceError: invalid assignment left-hand side
• ReferenceError: reference to undefined property "x"
• SyntaxError: "0"-prefixed octal literals and octal escape seq. are deprecated
• SyntaxError: "use strict" not allowed in function with non-simple parameters
• SyntaxError: "x" is a reserved identifier
• SyntaxError: JSON.parse: bad parsing
• SyntaxError: Malformed formal parameter
• SyntaxError: Unexpected token
• SyntaxError: Using //@ to indicate sourceURL pragmas is deprecated. Use //# instead
• SyntaxError: a declaration in the head of a for-of loop can't have an initializer
• SyntaxError: applying the 'delete' operator to an unqualified name is deprecated
• SyntaxError: for-in loop head declarations may not have initializers
• SyntaxError: function statement requires a name
• SyntaxError: identifier starts immediately after numeric literal
• SyntaxError: illegal character
• SyntaxError: invalid regular expression flag "x"
• SyntaxError: missing ) after argument list
• SyntaxError: missing ) after condition
• SyntaxError: missing : after property id
• SyntaxError: missing ; before statement
• SyntaxError: missing = in const declaration
• SyntaxError: missing ] after element list
• SyntaxError: missing formal parameter
• SyntaxError: missing name after . operator
• SyntaxError: missing variable name
• SyntaxError: missing } after function body
• SyntaxError: missing } after property list
• SyntaxError: redeclaration of formal parameter "x"
• SyntaxError: return not in function
• SyntaxError: test for equality (==) mistyped as assignment (=)?
• SyntaxError: unterminated string literal
• TypeError: "x" has no properties
• TypeError: "x" is (not) "y"
• TypeError: "x" is not a constructor
• TypeError: "x" is not a function
• TypeError: "x" is not a non-null object
• TypeError: "x" is read-only
• TypeError: 'x' is not iterable
• TypeError: More arguments needed
• TypeError: Reduce of empty array with no initial value
• TypeError: can't access dead object
• TypeError: can't access property "x" of "y"
• TypeError: can't assign to property "x" on "y": not an object
• TypeError: can't define property "x": "obj" is not extensible
• TypeError: can't delete non-configurable array element
• TypeError: can't redefine non-configurable property "x"
• TypeError: cannot use 'in' operator to search for 'x' in 'y'
• TypeError: cyclic object value
• TypeError: invalid 'instanceof' operand 'x'
• TypeError: invalid Array.prototype.sort argument
• TypeError: invalid arguments
• TypeError: invalid assignment to const "x"
• TypeError: property "x" is non-configurable and can't be deleted
• TypeError: setting getter-only property "x"
• TypeError: variable "x" redeclares argument
• URIError: malformed URI sequence
• Warning: -file- is being assigned a //# sourceMappingURL, but already has one
• Warning: 08/09 is not a legal ECMA-262 octal constant
• Warning: Date.prototype.toLocaleFormat is deprecated
• Warning: JavaScript 1.6's for-each-in loops are deprecated
• Warning: String.x is deprecated; use String.prototype.x instead
• Warning: expression closures are deprecated
• Warning: unreachable code after return statement
• X.prototype.y called on incompatible type
• JavaScript technologies overview
• Lexical grammar
• Enumerability and ownership of properties
• Iteration protocols
• Transitioning to strict mode
• Template literals
• Deprecated features
• ECMAScript 2015 support in Mozilla
• ECMAScript 5 support in Mozilla
• Firefox JavaScript changelog
• New in JavaScript 1.1
• New in JavaScript 1.2
• New in JavaScript 1.3
• New in JavaScript 1.4
• New in JavaScript 1.5
• New in JavaScript 1.6
• New in JavaScript 1.7
• New in JavaScript 1.8
• New in JavaScript 1.8.1
• New in JavaScript 1.8.5
• Documentation:
• All pages index
• Methods index
• Properties index
• Pages tagged "JavaScript"
• JavaScript doc status
• The MDN project

Learn the best of web development

Get the latest and greatest from MDN delivered straight to your inbox.

Thanks! Please check your inbox to confirm your subscription.

If you haven’t previously confirmed a subscription to a Mozilla-related newsletter you may have to do so. Please check your inbox or your spam filter for an email from us.

• Trending Now
• Foundational Courses
• Data Science
• Practice Problem
• Machine Learning
• System Design
• DevOps Tutorial
• NCERT Solutions for Class 10 History Chapter 4 : The Age of Industrialisation
• Check if given path between two nodes of a graph represents a shortest paths
• 5 Tips On Learning How to Code - General Advice For Programmers
• Introduction to React-Redux
• Set value of unsigned char array in C during runtime
• How to perform a real time search and filter on a HTML table?
• CSS will-change property
• HTTP headers | Range
• Sirion Labs Interview Experience (Off-Campus FTE)
• Amazon Interview Experience for SDE-2
• Standard Chartered Interview Experience | On-Campus Internship
• BlackRock Interview Experience | On-Campus Internship 2019
• DE-Shaw Interview Experience (On-Campus)
• Amazon Interview Experience for SDE 1 (1.5 years Experienced)
• Cvent Interview Experience(Pool Campus for fulltime)
• Check if any K ranges overlap at any point
• How Software Is Made?
• IIT Madras M.S Admission Experience
• Public vs Protected in C++ with Examples

Operator Associativity in Programming

Operator associative refers to the order in which operators of the same precedence are used in a word. In a programming language, it is important to understand the interactions between operators to properly define and test expressions. In this article, we will discuss operator associativity in programming.

Table of Content

• Operator Associativity in Arithmetic Operators
• Operator Associativity in Relational Operators
• Operator Associativity in Logical Operators
• Operator Associativity in Assignment Operators
• Operator Associativity in Bitwise Operators
• Operator Associativity in Conditional (Ternary) Operator
• Operator Associativity in Unary Operators
• Operator Associativity in C
• Operator Associativity in C++
• Operator Associativity in Java
• Operator Associativity in Python
• Operator Associativity in C#
• Operator Associativity in Javascript

Here is a table illustrating the Operator Associativity in Programming:

Operator Associativity in Arithmetic Operators:

Mathematical operations such as addition (+), subtraction (-), multiplication (*), division (/), and parameter (%), are usually symmetrical from left to right. This means that if there are multiple preceding functions in an expression, the processing is done from left to right .

int result = 5 + 3 * 2; // result will be 11 (5 + (3 * 2))

In the expression `5 + 3 * 2`, multiplication (*) including left-right association, takes higher priority and is considered first. So, `3 * 2` is `6`. The addition (+) is then performed, resulting in `5 + 6`, which equals `11`. This arrangement ensures that actions flow from left to right, mirroring the natural reading pattern. Left to right associations remain consistent, ensuring terms are evaluated as predicted without the need for clear parentheses to indicate the order Overall, it ensures clarity and simplicity in mathematical terms by an implicit sequence of activities based on the location of operators in a word.

Operator Associativity in Relational Operators:

Relational operators, like equality (==), inequality (!=), greater than (>), and less than (<), usually have left-to-right associativity as well.

boolean condition = 2 < 5 == true; // condition will be true ((2 < 5) == true)

In the case of relational expressions such as `2 < 5 == true`, the left-to-right association implies a left-to-right evaluation. So, they first check `2 < 5`, get `true`, then evaluate `true == true`, resulting in `true`. This chart ensures accuracy when comparing values ​​from left to right, and reflects a natural reading pattern. Left-to-right associations provide clarity by describing predictable behavioral patterns, conforming to observable expectations, and facilitating lexical analysis without the need for explicit parentheses and therefore `conditioning ` for `true`, which means that `2` is indeed less than `5`, and `true` is `true` It is equivalent.

Operator Associativity in Logical Operators:

Logical operators, including AND (&&) and OR (||), often exhibit left-to-right associativity.

bool_result = True or False and True # bool_result will be True (True or (False and True))

In logical terms such as `True or False and True`, a left-to-right association implies a left-to-right evaluation. Thus, `false and true` is the first analysis, which leads to `false`. A `true or false` evaluation is then performed, resulting in a `true` result. This process mirrors the natural reading process and ensures that logical positions are consistently explored from left to right. Left-to-right association provides clarity by defining a predictable order of execution, facilitates word analysis without the need for explicit parentheses. As a result, `bool_result` is assigned `True`, indicating that the first condition is true or the second condition evaluates to true.

Operator Associativity in Assignment Operators :

Assignment operators, like the simple assignment (=) and compound assignments (e.g., +=), typically have right-to-left associativity.

int a, b; a = b = 5; // Both a and b will be assigned the value 5 (b = 5, then a = b)

In applications like `a = b = 5`, the right-to-left association implies right-to-left analysis. As a result, the value `5` (`b = 5`) is first assigned to `b`, followed by the value `b` (`a = b`). This sequence ensures that `a` and `b` end up with the same value `5`. The right-to-left association simplifies the usage case by specifying an explicit usage pattern without the need for explicit parentheses, making the code readable and simple and thus providing `5` both `a` and `b`, making it a shorter and more efficient chaining function.

Operator Associativity in Bitwise Operators :

Bitwise operators, such as AND (&), OR (|), and XOR (^), usually have left-to-right associativity.

let result = 1 | 2 & 3; // result will be 3 (1 | (2 & 3))

`1 | 2 & 3`, left-to-right association versus left-to-right analysis. Thus, `2 & 3` are considered first, and `2` is the result. Then, `1 | 2` is evaluated, resulting in `3`. Left-to-right association ensures consistent analysis of bitwise functions while providing clarity in reference semantics. This association simplifies Bitwiz vocabulary by providing an explicit sequence of functions without the need for explicit parentheses. Consequently, a `result` is assigned to `3`, indicating a bitwise OR operation between `1` and `2`, after a bitwise AND operation between `2` and `3`.

Operator Associativity in Conditional (Ternary) Operator :

The conditional operator (?:) has right-to-left associativity.

let max = (a > b) ? a : b; // max will be the greater of a and b

The conditional function `(a > b) ? a : b`, right-to-left association versus right-to-left analysis. Consequently, if `a` is greater than `b`, then `a` is chosen; otherwise `b` is selected. Right-to-left association simplifies conditional terminology, and suggests a clear order of operation without the need for explicit parentheses. This association ensures that the conditional term is correctly evaluated, whereby the condition is first evaluated, followed by the selection of `a` or `b` depending on the condition and thus the `max` value of a higher between `a` and ` b`, in order to provide for shortened appointments Effective and conditional appointments.

Operator Associativity in Unary Operators :

Unary operators, like negation (-) and logical NOT (!), often have right-to-left associativity.

result = -(-5); # result will be 5 (-(-5))

In single expressions such as `-(-5)`, the right-to-left association implies right-to-left analysis. Initially, the internal negation `-5` is computed, resulting in `-(-5)` equal to `5`. Right-to-left association ensures that external negation acts on the consequences of internal negation. As a result, `-(-5)` evaluates to `5`, indicating that a negation is rejected. This association simplifies single terms and indicates a clear sequence of functions without the need for explicit parentheses. Thus, the resulting value is `5`, because the outer negation eventually negates the result, resulting in the original value

Operator Associativity in C:

Here are the implementation of Operator Associativity in C language:

Operator Associativity in C++:

Here are the implementation of Operator Associativity in C++ language:

Operator Associativity in Java:

Here are the implementation of Operator Associativity in java language:

Operator Associativity in Python:

Here are the implementation of Operator Associativity in python language:

Operator Associativity in C#:

Here are the implementation of Operator Associativity in C# language:

Operator Associativity in Javascript:

Here are the implementation of Operator Associativity in javascript language:

Conclusion:

Operator associativity determines the order in which operators of the same precedence are evaluated in an expression. In simple terms, it decides whether operators are evaluated from left to right or from right to left. This helps clarify the sequence of operations in complex expressions and ensures consistency in the behavior of operators.

Please Login to comment...

• Programming
• 10 Best HuggingChat Alternatives and Competitors
• Best Free Android Apps for Podcast Listening
• Google AI Model: Predicts Floods 7 Days in Advance
• Who is Devika AI? India's 'AI coder', an alternative to Devin AI
• 30 OOPs Interview Questions and Answers (2024)

Improve your Coding Skills with Practice

What kind of Experience do you want to share?