presentation layer protocols in computer networks

Presentation Layer: Protocols, Examples, Services | Functions of Presentation Layer

Presentation Layer is the 6th layer in the Open System Interconnection (OSI) model where all application programmer consider data structure and presentation, beyond of simply sending the data into form of datagram otherwise packets in between the hosts. Now, we will explain about what is presentation layer with its protocols, example, service ; involving with major functions of presentation Layer with ease. At the end of this article, you will completely educate about What is Presentation Layer in OSI Model without any hassle.

• What is Presentation Layer?

Definition : Presentation layer is 6th layer in the OSI model , and its main objective is to present all messages to upper layer as a standardized format. It is also known as the “ Translation layer “.  This layer takes care of syntax and semantics of messages exchanged in between two communication systems. Presentation layer has responsible that receiver can understand all data, and it will be to implement all data languages can be dissimilar of two communication system.

Presentation layer is capable to handle abstract data structures, and further it helps to defined and exchange of higher-level data structures.

Presentation Layer Tutorial Headlines:

In this section, we will show you all headlines about this entire article; you can check them as your choice; below shown all:

• Functions of Presentation Layer

Protocols of Presentation Layer

• Example of Presentation Layer Protocols

Presentation Layer Services

Design issues with presentation layer, faqs (frequently asked questions), what is meant by presentation layer in osi model, what protocols are used in the presentation layer, can you explain some presentation layer examples, what are the main functions of the presentation layer, what are services of presentation layer in osi, let’s get started,   functions of presentation layer.

Presentation layer performs various functions in the OSI model ; below explain each one – 

• Presentation layer helps to translate from American standard code for information interchange (ASCII) to the extended binary code decimal interchange code (EBCDIC).
• It deals with user interface as well as supporting for several services such as email and file transfer.
• It provides encoding mechanism for translating all messages from user dependent format with common format and vice – versa.
• It’s main goal for data encryption and decryption of entire data before they are getting transmission over all common platforms.
• It provides data compression mechanism for source point to decrease the all bits which are transmitted. Due to this data compression system, user are able to transmit enlarge multimedia file at fastest file transfer rate.
• Due to use of Data Encryption and Decryption algorithm, presentation layer provides more network protection and confidentiality while transmission data over the entire network.
• This layer offers best flexibility for data translation for making connections with various kinds of servers , computers, and mainframes over the similar network.
• Presentation layer has responsible to fix all translations in between all network systems .

Presentation layer is used various protocols; below list is available –

• Multipurpose Internet Mail Extensions
• File Transfer Protocol
• Network News Transfer Protocol
• Apple Filing Protocol (AFP)
• Independent Computing Architecture (ICA), the Citrix system core protocol
• Lightweight Presentation Protocol (LPP)
• NetWare Core Protocol (NCP)
• Network Data Representation (NDR)
• Telnet (a remote terminal access protocol)
• Tox Protocol
• eXternal Data Representation (XDR)
• 25 Packet Assembler/Disassembler Protocol (PAD)

Example of Presentation Layer Protocols:

Here, we will discuss all examples of presentation layer protocols; below explain each one –  

Multipurpose Internet Mail Extensions (MIME) : MIME protocol was introduced by Bell Communications in 1991, and it is an internet standard that provides scalable capable of email for attaching of images, sounds and text in a message.

File Transfer Protocol (FTP) : FTP is a internet protocol, and its main goal is to transmit all files in between one host to other hosts over the internet on TCP/IP connections.

Network News Transfer Protocol (NNTP) : This protocol is used to make connection with Usenet server and transmit all newsgroup articles in between system over internet.

Apple Filing Protocol (AFP ) : AFP protocol is designed by Apple company for sharing all files over the entire network .

Lightweight Presentation Protocol (LPP) : This protocol is used to offer ISO presentation services on top of TCP/IP based protocol stacks.

NetWare Core Protocol (NCP) : NCP is a Novell client server model protocol that is designed especially for Local Area Network (LAN). It is capable to perform several functions like as file/print-sharing, clock synchronization, remote processing and messaging.

Network Data Representation (NDR) : NDR is an data encoding standard, and it is implement in the Distributed Computing Environment (DCE).

Telnet (Telecommunication Network) : Telnet protocol was introduced in 1969, and it offers the command line interface for making communication along with remote device or server .

Tox : The Tox protocol is sometimes regarded as part of both the presentation and application layer , and it is used for sending peer-to-peer instant-messaging as well as video calling.

eXternal Data Representation (XDR) : This protocol provides the description and encoding of entire data, and  it’s main goal is to transfer data in between dissimilar computer architecture.

25 Packet Assembler/Disassembler Protocol (PAD) : Main objective of this protocol is to obtain all data from group of terminal and allots the data into X. 25 packets.

Presentation layer provides several services like as –

• Data conversion
• Character code translation
• Compression
• Encryption and Decryption
• It helps to handle and maintain Syntax and Semantics of the message transmitted.
• Encoding data can be done as standard agreed like as String, double, date, and more.
• Standard Encoding can be done on wire.

Presentation Layer is the 6th layer in the Open System Interconnection (OSI) model that is the lowest layer, where all application programmer consider data structure and presentation, beyond of simply sending the data into form of datagram otherwise packets in between the hosts.

Presentation layer is used various protocols like as:

Yes! In this article, already we have been explained many examples of presentation layer; you can check them.

Presentation layer has a responsibility for formatting, translation, and delivery of the information for getting to process otherwise display .

Now, i hope that you have completely learnt about what is presentation layer with its protocols, example, service ; involving with major functions of presentation Layer with ease. If this post is useful for you, then please share it along with your friends, family members or relatives over social media platforms like as Facebook, Instagram, Linked In, Twitter, and more.

Also Read: Data Link Layer: Protocols, Examples | Functions of Data Link Layer

If you have any experience, tips, tricks, or query regarding this issue? You can drop a comment!

Related Posts

  Layer 6 Presentation Layer

De/Encryption, Encoding, String representation

The presentation layer (data presentation layer, data provision level) sets the system-dependent representation of the data (for example, ASCII, EBCDIC) into an independent form, enabling the syntactically correct data exchange between different systems. Also, functions such as data compression and encryption are guaranteed that data to be sent by the application layer of a system that can be read by the application layer of another system to the layer 6. The presentation layer. If necessary, the presentation layer acts as a translator between different data formats, by making an understandable for both systems data format, the ASN.1 (Abstract Syntax Notation One) used.

OSI Layer 6 - Presentation Layer

The presentation layer is responsible for the delivery and formatting of information to the application layer for further processing or display. It relieves the application layer of concern regarding syntactical differences in data representation within the end-user systems. An example of a presentation service would be the conversion of an EBCDIC-coded text computer file to an ASCII-coded file. The presentation layer is the lowest layer at which application programmers consider data structure and presentation, instead of simply sending data in the form of datagrams or packets between hosts. This layer deals with issues of string representation - whether they use the Pascal method (an integer length field followed by the specified amount of bytes) or the C/C++ method (null-terminated strings, e.g. "thisisastring\0"). The idea is that the application layer should be able to point at the data to be moved, and the presentation layer will deal with the rest. Serialization of complex data structures into flat byte-strings (using mechanisms such as TLV or XML) can be thought of as the key functionality of the presentation layer. Encryption is typically done at this level too, although it can be done on the application, session, transport, or network layers, each having its own advantages and disadvantages. Decryption is also handled at the presentation layer. For example, when logging on to bank account sites the presentation layer will decrypt the data as it is received.[1] Another example is representing structure, which is normally standardized at this level, often by using XML. As well as simple pieces of data, like strings, more complicated things are standardized in this layer. Two common examples are 'objects' in object-oriented programming, and the exact way that streaming video is transmitted. In many widely used applications and protocols, no distinction is made between the presentation and application layers. For example, HyperText Transfer Protocol (HTTP), generally regarded as an application-layer protocol, has presentation-layer aspects such as the ability to identify character encoding for proper conversion, which is then done in the application layer. Within the service layering semantics of the OSI network architecture, the presentation layer responds to service requests from the application layer and issues service requests to the session layer. In the OSI model: the presentation layer ensures the information that the application layer of one system sends out is readable by the application layer of another system. For example, a PC program communicates with another computer, one using extended binary coded decimal interchange code (EBCDIC) and the other using ASCII to represent the same characters. If necessary, the presentation layer might be able to translate between multiple data formats by using a common format. Wikipedia

• Data conversion
• Character code translation
• Compression
• Encryption and Decryption

The Presentation OSI Layer is usually composed of 2 sublayers that are:

CASE common application service element

Sase specific application service element, layer 7   application layer, layer 6   presentation layer, layer 5   session layer, layer 4   transport layer, layer 3   network layer, layer 2   data link layer, layer 1   physical layer.

The OSI Model – The 7 Layers of Networking Explained in Plain English

This article explains the Open Systems Interconnection (OSI) model and the 7 layers of networking, in plain English.

The OSI model is a conceptual framework that is used to describe how a network functions. In plain English, the OSI model helped standardize the way computer systems send information to each other.

Learning networking is a bit like learning a language - there are lots of standards and then some exceptions. Therefore, it’s important to really understand that the OSI model is not a set of rules. It is a tool for understanding how networks function.

Once you learn the OSI model, you will be able to further understand and appreciate this glorious entity we call the Internet, as well as be able to troubleshoot networking issues with greater fluency and ease.

All hail the Internet!

Prerequisites

You don’t need any prior programming or networking experience to understand this article. However, you will need:

• Basic familiarity with common networking terms (explained below)
• A curiosity about how things work :)

Learning Objectives

Over the course of this article, you will learn:

• What the OSI model is
• The purpose of each of the 7 layers
• The problems that can happen at each of the 7 layers
• The difference between TCP/IP model and the OSI model

Common Networking Terms

Here are some common networking terms that you should be familiar with to get the most out of this article. I’ll use these terms when I talk about OSI layers next.

A node is a physical electronic device hooked up to a network, for example a computer, printer, router, and so on. If set up properly, a node is capable of sending and/or receiving information over a network.

Nodes may be set up adjacent to one other, wherein Node A can connect directly to Node B, or there may be an intermediate node, like a switch or a router, set up between Node A and Node B.

Typically, routers connect networks to the Internet and switches operate within a network to facilitate intra-network communication. Learn more about hub vs. switch vs. router.

Here's an example:

For the nitpicky among us (yep, I see you), host is another term that you will encounter in networking. I will define a host as a type of node that requires an IP address. All hosts are nodes, but not all nodes are hosts. Please Tweet angrily at me if you disagree.

Links connect nodes on a network. Links can be wired, like Ethernet, or cable-free, like WiFi.

Links to can either be point-to-point, where Node A is connected to Node B, or multipoint, where Node A is connected to Node B and Node C.

When we’re talking about information being transmitted, this may also be described as a one-to-one vs. a one-to-many relationship.

A protocol is a mutually agreed upon set of rules that allows two nodes on a network to exchange data.

“A protocol defines the rules governing the syntax (what can be communicated), semantics (how it can be communicated), and synchronization (when and at what speed it can be communicated) of the communications procedure. Protocols can be implemented on hardware, software, or a combination of both. Protocols can be created by anyone, but the most widely adopted protocols are based on standards.” - The Illustrated Network.

Both wired and cable-free links can have protocols.

While anyone can create a protocol, the most widely adopted protocols are often based on standards published by Internet organizations such as the Internet Engineering Task Force (IETF).

A network is a general term for a group of computers, printers, or any other device that wants to share data.

Network types include LAN, HAN, CAN, MAN, WAN, BAN, or VPN. Think I’m just randomly rhyming things with the word can ? I can ’t say I am - these are all real network types. Learn more here .

Topology describes how nodes and links fit together in a network configuration, often depicted in a diagram. Here are some common network topology types:

A network consists of nodes, links between nodes, and protocols that govern data transmission between nodes.

At whatever scale and complexity networks get to, you will understand what’s happening in all computer networks by learning the OSI model and 7 layers of networking.

What is the OSI Model?

The OSI model consists of 7 layers of networking.

First, what’s a layer?

No, a layer - not a lair . Here there are no dragons.

A layer is a way of categorizing and grouping functionality and behavior on and of a network.

In the OSI model, layers are organized from the most tangible and most physical, to less tangible and less physical but closer to the end user.

Each layer abstracts lower level functionality away until by the time you get to the highest layer. All the details and inner workings of all the other layers are hidden from the end user.

How to remember all the names of the layers? Easy.

• Please | Physical Layer
• Do | Data Link Layer
• Not | Network Layer
• Tell (the) | Transport Layer
• Secret | Session Layer
• Password (to) | Presentation Layer
• Anyone | Application Layer

Keep in mind that while certain technologies, like protocols, may logically “belong to” one layer more than another, not all technologies fit neatly into a single layer in the OSI model. For example, Ethernet, 802.11 (Wifi) and the Address Resolution Protocol (ARP) procedure operate on >1 layer.

The OSI is a model and a tool, not a set of rules.

OSI Layer 1

Layer 1 is the physical layer . There’s a lot of technology in Layer 1 - everything from physical network devices, cabling, to how the cables hook up to the devices. Plus if we don’t need cables, what the signal type and transmission methods are (for example, wireless broadband).

Instead of listing every type of technology in Layer 1, I’ve created broader categories for these technologies. I encourage readers to learn more about each of these categories:

• Nodes (devices) and networking hardware components. Devices include hubs, repeaters, routers, computers, printers, and so on. Hardware components that live inside of these devices include antennas, amplifiers, Network Interface Cards (NICs), and more.
• Device interface mechanics. How and where does a cable connect to a device (cable connector and device socket)? What is the size and shape of the connector, and how many pins does it have? What dictates when a pin is active or inactive?
• Functional and procedural logic. What is the function of each pin in the connector - send or receive? What procedural logic dictates the sequence of events so a node can start to communicate with another node on Layer 2?
• Cabling protocols and specifications. Ethernet (CAT), USB, Digital Subscriber Line (DSL) , and more. Specifications include maximum cable length, modulation techniques, radio specifications, line coding, and bits synchronization (more on that below).
• Cable types. Options include shielded or unshielded twisted pair, untwisted pair, coaxial and so on. Learn more about cable types here .
• Signal type. Baseband is a single bit stream at a time, like a railway track - one-way only. Broadband consists of multiple bit streams at the same time, like a bi-directional highway.
• Signal transmission method (may be wired or cable-free). Options include electrical (Ethernet), light (optical networks, fiber optics), radio waves (802.11 WiFi, a/b/g/n/ac/ax variants or Bluetooth). If cable-free, then also consider frequency: 2.5 GHz vs. 5 GHz. If it’s cabled, consider voltage. If cabled and Ethernet, also consider networking standards like 100BASE-T and related standards.

The data unit on Layer 1 is the bit.

A bit the smallest unit of transmittable digital information. Bits are binary, so either a 0 or a 1. Bytes, consisting of 8 bits, are used to represent single characters, like a letter, numeral, or symbol.

Bits are sent to and from hardware devices in accordance with the supported data rate (transmission rate, in number of bits per second or millisecond) and are synchronized so the number of bits sent and received per unit of time remains consistent (this is called bit synchronization). The way bits are transmitted depends on the signal transmission method.

Nodes can send, receive, or send and receive bits. If they can only do one, then the node uses a simplex mode. If they can do both, then the node uses a duplex mode. If a node can send and receive at the same time, it’s full-duplex – if not, it’s just half-duplex.

The original Ethernet was half-duplex. Full-duplex Ethernet is an option now, given the right equipment.

How to Troubleshoot OSI Layer 1 Problems

Here are some Layer 1 problems to watch out for:

• Defunct cables, for example damaged wires or broken connectors
• Broken hardware network devices, for example damaged circuits
• Stuff being unplugged (...we’ve all been there)

If there are issues in Layer 1, anything beyond Layer 1 will not function properly.

Layer 1 contains the infrastructure that makes communication on networks possible.

It defines the electrical, mechanical, procedural, and functional specifications for activating, maintaining, and deactivating physical links between network devices. - Source

Fun fact: deep-sea communications cables transmit data around the world. This map will blow your mind: https://www.submarinecablemap.com/

And because you made it this far, here’s a koala:

OSI Layer 2

Layer 2 is the data link layer . Layer 2 defines how data is formatted for transmission, how much data can flow between nodes, for how long, and what to do when errors are detected in this flow.

In more official tech terms:

• Line discipline. Who should talk for how long? How long should nodes be able to transit information for?
• Flow control. How much data should be transmitted?
• Error control - detection and correction . All data transmission methods have potential for errors, from electrical spikes to dirty connectors. Once Layer 2 technologies tell network administrators about an issue on Layer 2 or Layer 1, the system administrator can correct for those errors on subsequent layers. Layer 2 is mostly concerned with error detection, not error correction. ( Source )

There are two distinct sublayers within Layer 2:

• Media Access Control (MAC): the MAC sublayer handles the assignment of a hardware identification number, called a MAC address, that uniquely identifies each device on a network. No two devices should have the same MAC address. The MAC address is assigned at the point of manufacturing. It is automatically recognized by most networks. MAC addresses live on Network Interface Cards (NICs). Switches keep track of all MAC addresses on a network. Learn more about MAC addresses on PC Mag and in this article . Learn more about network switches here .
• Logical Link Control (LLC): the LLC sublayer handles framing addressing and flow control. The speed depends on the link between nodes, for example Ethernet or Wifi.

The data unit on Layer 2 is a frame .

Each frame contains a frame header, body, and a frame trailer:

• Header: typically includes MAC addresses for the source and destination nodes.
• Body: consists of the bits being transmitted.
• Trailer: includes error detection information. When errors are detected, and depending on the implementation or configuration of a network or protocol, frames may be discarded or the error may be reported up to higher layers for further error correction. Examples of error detection mechanisms: Cyclic Redundancy Check (CRC) and Frame Check Sequence (FCS). Learn more about error detection techniques here .

Typically there is a maximum frame size limit, called an Maximum Transmission Unit, MTU. Jumbo frames exceed the standard MTU, learn more about jumbo frames here .

How to Troubleshoot OSI Layer 2 Problems

Here are some Layer 2 problems to watch out for:

• All the problems that can occur on Layer 1
• Unsuccessful connections (sessions) between two nodes
• Sessions that are successfully established but intermittently fail
• Frame collisions

The Data Link Layer allows nodes to communicate with each other within a local area network. The foundations of line discipline, flow control, and error control are established in this layer.

OSI Layer 3

Layer 3 is the network layer . This is where we send information between and across networks through the use of routers. Instead of just node-to-node communication, we can now do network-to-network communication.

Routers are the workhorse of Layer 3 - we couldn’t have Layer 3 without them. They move data packets across multiple networks.

Not only do they connect to Internet Service Providers (ISPs) to provide access to the Internet, they also keep track of what’s on its network (remember that switches keep track of all MAC addresses on a network), what other networks it’s connected to, and the different paths for routing data packets across these networks.

Routers store all of this addressing and routing information in routing tables.

Here’s a simple example of a routing table:

The data unit on Layer 3 is the data packet . Typically, each data packet contains a frame plus an IP address information wrapper. In other words, frames are encapsulated by Layer 3 addressing information.

The data being transmitted in a packet is also sometimes called the payload . While each packet has everything it needs to get to its destination, whether or not it makes it there is another story.

Layer 3 transmissions are connectionless, or best effort - they don't do anything but send the traffic where it’s supposed to go. More on data transport protocols on Layer 4.

Once a node is connected to the Internet, it is assigned an Internet Protocol (IP) address, which looks either like 172.16. 254.1 (IPv4 address convention) or like 2001:0db8:85a3:0000:0000:8a2e:0370:7334 (IPv6 address convention). Routers use IP addresses in their routing tables.

IP addresses are associated with the physical node’s MAC address via the Address Resolution Protocol (ARP), which resolves MAC addresses with the node’s corresponding IP address.

ARP is conventionally considered part of Layer 2, but since IP addresses don’t exist until Layer 3, it’s also part of Layer 3.

How to Troubleshoot OSI Layer 3 Problems

Here are some Layer 3 problems to watch out for:

• All the problems that can crop up on previous layers :)
• Faulty or non-functional router or other node
• IP address is incorrectly configured

Many answers to Layer 3 questions will require the use of command-line tools like ping , trace , show ip route , or show ip protocols . Learn more about troubleshooting on layer 1-3 here .

The Network Layer allows nodes to connect to the Internet and send information across different networks.

OSI Layer 4

Layer 4 is the transport layer . This where we dive into the nitty gritty specifics of the connection between two nodes and how information is transmitted between them. It builds on the functions of Layer 2 - line discipline, flow control, and error control.

This layer is also responsible for data packet segmentation, or how data packets are broken up and sent over the network.

Unlike the previous layer, Layer 4 also has an understanding of the whole message, not just the contents of each individual data packet. With this understanding, Layer 4 is able to manage network congestion by not sending all the packets at once.

The data units of Layer 4 go by a few names. For TCP, the data unit is a packet. For UDP, a packet is referred to as a datagram. I’ll just use the term data packet here for the sake of simplicity.

Transmission Control Protocol (TCP) and User Datagram Protocol (UDP) are two of the most well-known protocols in Layer 4.

TCP, a connection-oriented protocol, prioritizes data quality over speed.

TCP explicitly establishes a connection with the destination node and requires a handshake between the source and destination nodes when data is transmitted. The handshake confirms that data was received. If the destination node does not receive all of the data, TCP will ask for a retry.

TCP also ensures that packets are delivered or reassembled in the correct order. Learn more about TCP here .

UDP, a connectionless protocol, prioritizes speed over data quality. UDP does not require a handshake, which is why it’s called connectionless.

Because UDP doesn’t have to wait for this acknowledgement, it can send data at a faster rate, but not all of the data may be successfully transmitted and we’d never know.

If information is split up into multiple datagrams, unless those datagrams contain a sequence number, UDP does not ensure that packets are reassembled in the correct order. Learn more about UDP here .

TCP and UDP both send data to specific ports on a network device, which has an IP address. The combination of the IP address and the port number is called a socket.

Learn more about sockets here .

Learn more about the differences and similarities between these two protocols here .

How to Troubleshoot OSI Layer 4 Problems

Here are some Layer 4 problems to watch out for:

• Blocked ports - check your Access Control Lists (ACL) & firewalls
• Quality of Service (QoS) settings. QoS is a feature of routers/switches that can prioritize traffic, and they can really muck things up. Learn more about QoS here .

The Transport Layer provides end-to-end transmission of a message by segmenting a message into multiple data packets; the layer supports connection-oriented and connectionless communication.

OSI Layer 5

Layer 5 is the session layer . This layer establishes, maintains, and terminates sessions.

A session is a mutually agreed upon connection that is established between two network applications. Not two nodes! Nope, we’ve moved on from nodes. They were so Layer 4.

Just kidding, we still have nodes, but Layer 5 doesn’t need to retain the concept of a node because that’s been abstracted out (taken care of) by previous layers.

So a session is a connection that is established between two specific end-user applications. There are two important concepts to consider here:

• Client and server model: the application requesting the information is called the client, and the application that has the requested information is called the server.
• Request and response model: while a session is being established and during a session, there is a constant back-and-forth of requests for information and responses containing that information or “hey, I don’t have what you’re requesting.”

Sessions may be open for a very short amount of time or a long amount of time. They may fail sometimes, too.

Depending on the protocol in question, various failure resolution processes may kick in. Depending on the applications/protocols/hardware in use, sessions may support simplex, half-duplex, or full-duplex modes.

Examples of protocols on Layer 5 include Network Basic Input Output System (NetBIOS) and Remote Procedure Call Protocol (RPC), and many others.

From here on out (layer 5 and up), networks are focused on ways of making connections to end-user applications and displaying data to the user.

How to Troubleshoot OSI Layer 5 Problems

Here are some Layer 5 problems to watch out for:

• Servers are unavailable
• Servers are incorrectly configured, for example Apache or PHP configs
• Session failure - disconnect, timeout, and so on.

The Session Layer initiates, maintains, and terminates connections between two end-user applications. It responds to requests from the presentation layer and issues requests to the transport layer.

OSI Layer 6

Layer 6 is the presentation layer . This layer is responsible for data formatting, such as character encoding and conversions, and data encryption.

The operating system that hosts the end-user application is typically involved in Layer 6 processes. This functionality is not always implemented in a network protocol.

Layer 6 makes sure that end-user applications operating on Layer 7 can successfully consume data and, of course, eventually display it.

There are three data formatting methods to be aware of:

• American Standard Code for Information Interchange (ASCII): this 7-bit encoding technique is the most widely used standard for character encoding. One superset is ISO-8859-1, which provides most of the characters necessary for languages spoken in Western Europe.
• Extended Binary-Coded Decimal Interchange Code (EBDCIC): designed by IBM for mainframe usage. This encoding is incompatible with other character encoding methods.
• Unicode: character encodings can be done with 32-, 16-, or 8-bit characters and attempts to accommodate every known, written alphabet.

Learn more about character encoding methods in this article , and also here .

Encryption: SSL or TLS encryption protocols live on Layer 6. These encryption protocols help ensure that transmitted data is less vulnerable to malicious actors by providing authentication and data encryption for nodes operating on a network. TLS is the successor to SSL.

How to Troubleshoot OSI Layer 6 Problems

Here are some Layer 6 problems to watch out for:

• Non-existent or corrupted drivers
• Incorrect OS user access level

The Presentation Layer formats and encrypts data.

OSI Layer 7

Layer 7 is the application layer .

True to its name, this is the layer that is ultimately responsible for supporting services used by end-user applications. Applications include software programs that are installed on the operating system, like Internet browsers (for example, Firefox) or word processing programs (for example, Microsoft Word).

Applications can perform specialized network functions under the hood and require specialized services that fall under the umbrella of Layer 7.

Electronic mail programs, for example, are specifically created to run over a network and utilize networking functionality, such as email protocols, which fall under Layer 7.

Applications will also control end-user interaction, such as security checks (for example, MFA), identification of two participants, initiation of an exchange of information, and so on.

Protocols that operate on this level include File Transfer Protocol (FTP), Secure Shell (SSH), Simple Mail Transfer Protocol (SMTP), Internet Message Access Protocol (IMAP), Domain Name Service (DNS), and Hypertext Transfer Protocol (HTTP).

While each of these protocols serve different functions and operate differently, on a high level they all facilitate the communication of information. ( Source )

How to Troubleshoot OSI Layer 7 Problems

Here are some Layer 7 problems to watch out for:

• All issues on previous layers
• Incorrectly configured software applications
• User error (... we’ve all been there)

The Application Layer owns the services and functions that end-user applications need to work. It does not include the applications themselves.

Our Layer 1 koala is all grown up.

Learning check - can you apply makeup to a koala?

Don’t have a koala?

Well - answer these questions instead. It’s the next best thing, I promise.

• What is the OSI model?
• What are each of the layers?
• How could I use this information to troubleshoot networking issues?

Congratulations - you’ve taken one step farther to understanding the glorious entity we call the Internet.

Learning Resources

Many, very smart people have written entire books about the OSI model or entire books about specific layers. I encourage readers to check out any O’Reilly-published books about the subject or about network engineering in general.

Here are some resources I used when writing this article:

• The Illustrated Network, 2nd Edition
• Protocol Data Unit (PDU): https://www.geeksforgeeks.org/difference-between-segments-packets-and-frames/
• Troubleshooting Along the OSI Model: https://www.pearsonitcertification.com/articles/article.aspx?p=1730891
• The OSI Model Demystified: https://www.youtube.com/watch?v=HEEnLZV2wGI
• OSI Model for Dummies: https://www.dummies.com/programming/networking/layers-in-the-osi-model-of-a-computer-network/

Chloe Tucker is an artist and computer science enthusiast based in Portland, Oregon. As a former educator, she's continuously searching for the intersection of learning and teaching, or technology and art. Reach out to her on Twitter @_chloetucker and check out her website at chloe.dev .

Read more posts .

If you read this far, thank the author to show them you care. Say Thanks

Learn to code for free. freeCodeCamp's open source curriculum has helped more than 40,000 people get jobs as developers. Get started

Presentation Layer

Last Edited

What is the Presentation Layer?

Presentation Layer is the Layer 6 of the seven-layer Open Systems Interconnection (OSI) reference model . The presentation layer structures data that is passed down from the application layer into a format suitable for network transmission. This layer is responsible for data encryption, data compression, character set conversion, interpretation of graphics commands, and so on. The network redirector also functions at this layer.

Presentation Layer functions

• Translation:  Before being transmitted, information in the form of characters and numbers should be changed to bit streams. Layer 6 is responsible for interoperability between encoding methods as different computers use different encoding methods. It translates data between the formats the network requires and the format the computer.
• Encryption:  Encryption at the transmitter and decryption at the receiver
• Compression:  Data compression to reduce the bandwidth of the data to be transmitted. The primary role of  data compression  is to reduce the number of bits to be transmitted. Multimedia files, such as audio and video, are bigger than text files and compression is more important.

Role of Presentation Layer in the OSI Model

This layer is not always used in network communications because its functions are not always necessary. Translation is only needed if different types of machines need to talk with each other. Encryption is optional in communication. If the information is public there is no need to encrypt and decrypt info. Compression is also optional. If files are small there is no need for compression.

Explaining Layer 6 in video

Most real-world protocol suites, such as TCP/IP , do not use separate presentation layer protocols. This layer is mostly an abstraction in real-world networking.

An example of a program that loosely adheres to layer 6 of OSI is the tool that manages the Hypertext Transfer Protocol (HTTP) — although it’s technically considered an application-layer protocol per the TCP/IP model.

However, HTTP includes presentation layer services within it. HTTP works when the requesting device forwards user requests passed to the web browser onto a web server elsewhere in the network.

It receives a return message from the web server that includes a multipurpose internet mail extensions (MIME) header. The MIME header indicates the type of file – text, video, or audio – that has been received so that an appropriate player utility can be used to present the file to the user.

In short, the presentation layer

Makes sure that data which is being transferred or received should be accurate or clear to all the devices which are there, in a closed network.

• ensures proper formatting and delivery to and from the application layer;
• performs data encryption; and
• manages serialization of data objects.

COMPUTER NETWORK BASICS

• Introduction To Computer Networks
• Uses of Computer Networks
• Line Configuration
• Types of Network Topology
• Transmission Modes
• Transmission Mediums
• Bounded/Guided Transmission Media
• UnBounded/UnGuided Transmission Media
• Types of Communication Networks
• Connection Oriented and Connectionless Services
• Network Layer
• Quality of Service(QoS)
• IGMP Protocol
• Reference Models

Physical Layer

• Digital Transmission
• Multiplexing
• Circuit-Switched
• Message-Switched Networks
• Packet Switching

Data link layer

• Error Correction
• Data Link Control
• Flow and Error
• Simplest Protocol
• Stop-and-Wait Protocol
• Go-Back-N Automatic Repeat
• Sliding Window Protocol
• HDLC Protocol
• Point-to-Point Protocol
• Multiple Access in DL
• Channelization Protocols
• Gigabit Ethernet
• Random Access Protocol
• Controlled Access Protocols
• Carrier Sense Multiple Access

Transport layer

• Transport Layer
• Telnet vs SSH
• UDP Protocol
• TCP - Protocol

ISO/OSI REFERENCE MODEL

• Introduction to Reference Models
• OSI Model: Physical Layer
• OSI Model: Datalink Layer
• OSI Model: Network Layer
• OSI Model: Transport Layer
• OSI Model: Session Layer
• OSI Model: Presentation Layer
• OSI Model: Application Layer

TCP/IP REFERENCE MODELCOMPUTER NETWORKS

• The TCP/IP Reference Model
• Difference between OSI and TCP/IP Model
• Key Terms - Computer Network

Session layer

• Session Layer

Computer Networks

• Components of Computer Networks
• Features of Computer Network
• Protocols and Standards
• Connection Oriented and Connectionless
• OSI Vs TCP/IP

Presentation layer

• Presentation Layer

Application layer

• HTTP Protocol
• FTP Protocol
• SMTP Protocol
• POP Protocol
• SNMP Protocol
• Electronic Mail
• MIME Protocol
• World Wide Web
• DNS Protocol

Presentation Layer - OSI Model

The primary goal of this layer is to take care of the syntax and semantics of the information exchanged between two communicating systems. Presentation layer takes care that the data is sent in such a way that the receiver will understand the information(data) and will be able to use the data. Languages(syntax) can be different of the two communicating systems. Under this condition presentation layer plays a role translator.

In order to make it possible for computers with different data representations to communicate, the data structures to be exchanged can be defined in an abstract way. The presentation layer manages these abstract data structures and allows higher-level data structures(eg: banking records), to be defined and exchanged.

Functions of Presentation Layer

• Translation: Before being transmitted, information in the form of characters and numbers should be changed to bit streams. The presentation layer is responsible for interoperability between encoding methods as different computers use different encoding methods. It translates data between the formats the network requires and the format the computer.
• Encryption: It carries out encryption at the transmitter and decryption at the receiver.
• Compression: It carries out data compression to reduce the bandwidth of the data to be transmitted. The primary role of Data compression is to reduce the number of bits to be 0transmitted. It is important in transmitting multimedia such as audio, video, text etc.

Design Issues with Presentation Layer

• To manage and maintain the Syntax and Semantics of the information transmitted.
• Encoding data in a standard agreed upon way. Eg: String, double, date, etc.
• Perform Standard Encoding on wire.
• ← Prev
• Next →

  CN MCQ Tests

  gate interview tests.

Home  >  Learning Center  >  OSI Model  

Article's content

Need help protecting your applications?

See how imperva can help, what is the osi model.

The Open Systems Interconnection (OSI) model describes seven layers that computer systems use to communicate over a network. It was the first standard model for network communications, adopted by all major computer and telecommunication companies in the early 1980s

The modern Internet is not based on OSI, but on the simpler TCP/IP model. However, the OSI 7-layer model is still widely used, as it helps visualize and communicate how networks operate, and helps isolate and troubleshoot networking problems.

OSI was introduced in 1983 by representatives of the major computer and telecom companies, and was adopted by ISO as an international standard in 1984.

OSI Model Explained: The OSI 7 Layers

We’ll describe OSI layers “top down” from the application layer that directly serves the end user, down to the physical layer.

7. Application Layer

The application layer is used by end-user software such as web browsers and email clients. It provides protocols that allow software to send and receive information and present meaningful data to users. A few examples of application layer protocols are the Hypertext Transfer Protocol (HTTP), File Transfer Protocol (FTP), Post Office Protocol (POP), Simple Mail Transfer Protocol (SMTP), and Domain Name System (DNS).

6. Presentation Layer

The presentation layer prepares data for the application layer. It defines how two devices should encode, encrypt, and compress data so it is received correctly on the other end. The presentation layer takes any data transmitted by the application layer and prepares it for transmission over the session layer.

5. Session Layer

The session layer creates communication channels, called sessions, between devices. It is responsible for opening sessions, ensuring they remain open and functional while data is being transferred, and closing them when communication ends. The session layer can also set checkpoints during a data transfer—if the session is interrupted, devices can resume data transfer from the last checkpoint.

4. Transport Layer

The transport layer takes data transferred in the session layer and breaks it into “segments” on the transmitting end. It is responsible for reassembling the segments on the receiving end, turning it back into data that can be used by the session layer. The transport layer carries out flow control, sending data at a rate that matches the connection speed of the receiving device, and error control, checking if data was received incorrectly and if not, requesting it again.

3. Network Layer

The network layer has two main functions. One is breaking up segments into network packets, and reassembling the packets on the receiving end. The other is routing packets by discovering the best path across a physical network. The network layer uses network addresses (typically Internet Protocol addresses) to route packets to a destination node.

2. Data Link Layer

The data link layer establishes and terminates a connection between two physically-connected nodes on a network. It breaks up packets into frames and sends them from source to destination. This layer is composed of two parts—Logical Link Control (LLC), which identifies network protocols, performs error checking and synchronizes frames, and Media Access Control (MAC) which uses MAC addresses to connect devices and define permissions to transmit and receive data.

1. Physical Layer

The physical layer is responsible for the physical cable or wireless connection between network nodes. It defines the connector, the electrical cable or wireless technology connecting the devices, and is responsible for transmission of the raw data, which is simply a series of 0s and 1s, while taking care of bit rate control.

Advantages of OSI Model

The OSI model helps users and operators of computer networks:

• Determine the required hardware and software to build their network.
• Understand and communicate the process followed by components communicating across a network. 
• Perform troubleshooting, by identifying which network layer is causing an issue and focusing efforts on that layer.

The OSI model helps network device manufacturers and networking software vendors:

• Create devices and software that can communicate with products from any other vendor, allowing open interoperability
• Define which parts of the network their products should work with.
• Communicate to users at which network layers their product operates – for example, only at the application layer, or across the stack.

Cracking the Code: Defending APIs from Business Logic Attacks

Register Now

OSI vs. TCP/IP Model

The Transfer Control Protocol/Internet Protocol (TCP/IP) is older than the OSI model and was created by the US Department of Defense (DoD). A key difference between the models is that TCP/IP is simpler, collapsing several OSI layers into one:

• OSI layers 5, 6, 7 are combined into one Application Layer in TCP/IP
• OSI layers 1, 2 are combined into one Network Access Layer in TCP/IP – however TCP/IP does not take responsibility for sequencing and acknowledgement functions, leaving these to the underlying transport layer.

Other important differences:

• TCP/IP is a functional model designed to solve specific communication problems, and which is based on specific, standard protocols. OSI is a generic, protocol-independent model intended to describe all forms of network communication.
• In TCP/IP, most applications use all the layers, while in OSI simple applications do not use all seven layers. Only layers 1, 2 and 3 are mandatory to enable any data communication.

See how Imperva Web Application Firewall can help you with application security.

Imperva Application Security

Imperva security solutions secure your applications across multiple layers of the OSI model, from the network layer, protected by Imperva DDoS mitigation, to Imperva’s web application firewall (WAF), bot management and API security technology that safeguards the application layer.

To secure applications and networks across the OSI stack, Imperva provides multi-layered protection to make sure websites and applications are available, easily accessible and safe. The Imperva applicati on security solution includes:

• DDoS Protection —maintain uptime in all situations. Prevent any type of DDoS attack, of any size, from preventing access to your website and network infrastructure.
• CDN —enhance website performance and reduce bandwidth costs with a CDN designed for developers. Cache static resources at the edge while accelerating APIs and dynamic websites.
• WAF —cloud-based solution permits legitimate traffic and prevents bad traffic, safeguarding applications at the edge. Gateway WAF keeps applications and APIs inside your network safe.
• Bot protection —analyzes your bot traffic to pinpoint anomalies, identifies bad bot behavior and validates it via challenge mechanisms that do not impact user traffic.
• API security —protects APIs by ensuring only desired traffic can access your API endpoint, as well as detecting and blocking exploits of vulnerabilities.
• Account takeover protection —uses an intent-based detection process to identify and defends against attempts to take over users’ accounts for malicious purposes.
• RASP —keep your applications safe from within against known and zero‑day attacks. Fast and accurate protection with no signature or learning mode.
• Attack analytics —mitigate and respond to real cyber security threats efficiently and accurately with actionable intelligence across all your layers of defense.

Latest Blogs

Feb 19, 2024 6 min read

, Sofia Naer

Dec 19, 2023 2 min read

Dec 14, 2023 5 min read

Daniel Johnston

Dec 14, 2023 3 min read

• Imperva Threat Research

Erez Hasson

, Gabi Stapel

Nov 8, 2023 13 min read

Oct 24, 2023 3 min read

Oct 19, 2023 7 min read

Kunal Anand

, Nadav Avital

Oct 10, 2023 1 min read

Latest Articles

• Cybersecurity 101

175.5k Views

115.7k Views

113.8k Views

103.9k Views

74.3k Views

54.9k Views

54.2k Views

Protect Against Business Logic Abuse

Identify key capabilities to prevent attacks targeting your business logic

The 10th Annual Bad Bot Report

The evolution of malicious automation over the last decade

The State of Security Within eCommerce in 2022

Learn how automated threats and API attacks on retailers are increasing

Prevoty is now part of the Imperva Runtime Protection

Protection against zero-day attacks

No tuning, highly-accurate out-of-the-box

Effective against OWASP top 10 vulnerabilities

An Imperva security specialist will contact you shortly.

Top 3 US Retailer

OSI Model Layers and Protocols in Computer Network

What is OSI Model?

The OSI Model is a logical and conceptual model that defines network communication used by systems open to interconnection and communication with other systems. The Open System Interconnection (OSI Model) also defines a logical network and effectively describes computer packet transfer by using various layers of protocols.

Characteristics of OSI Model

Here are some important characteristics of the OSI model:

• A layer should only be created where the definite levels of abstraction are needed.
• The function of each layer should be selected as per the internationally standardized protocols.
• The number of layers should be large so that separate functions should not be put in the same layer. At the same time, it should be small enough so that architecture doesn’t become very complicated.
• In the OSI model, each layer relies on the next lower layer to perform primitive functions. Every level should able to provide services to the next higher layer
• Changes made in one layer should not need changes in other lavers.

Why of OSI Model?

• Helps you to understand communication over a network
• Troubleshooting is easier by separating functions into different network layers.
• Helps you to understand new technologies as they are developed.
• Allows you to compare primary functional relationships on various network layers.

History of OSI Model

Here are essential landmarks from the history of OSI model:

• In the late 1970s, the ISO conducted a program to develop general standards and methods of networking.
• In 1973, an Experimental Packet Switched System in the UK identified the requirement for defining the higher-level protocols.
• In the year 1983, OSI model was initially intended to be a detailed specification of actual interfaces.
• In 1984, the OSI architecture was formally adopted by ISO as an international standard

7 Layers of the OSI Model

OSI model is a layered server architecture system in which each layer is defined according to a specific function to perform. All these seven layers work collaboratively to transmit the data from one layer to another.

• The Upper Layers : It deals with application issues and mostly implemented only in software. The highest is closest to the end system user. In this layer, communication from one end-user to another begins by using the interaction between the application layer. It will process all the way to end-user.
• The Lower Layers : These layers handle activities related to data transport. The physical layer and datalink layers also implemented in software and hardware.

Upper and Lower layers further divide network architecture into seven different layers as below

• Application
• Presentation
• Network, Data-link
• Physical layers

Let’s Study each layer in detail:

Physical Layer

The physical layer helps you to define the electrical and physical specifications of the data connection. This level establishes the relationship between a device and a physical transmission medium. The physical layer is not concerned with protocols or other such higher-layer items. One example of a technology that operates at the physical layer in telecommunications is PRI (Primary Rate Interface). To learn more about PRI and how it works , you can visit this informative article.

Examples of hardware in the physical layer are network adapters, ethernet, repeaters, networking hubs, etc.

Data Link Layer

Data link layer corrects errors which can occur at the physical layer. The layer allows you to define the protocol to establish and terminates a connection between two connected network devices.

It is IP address understandable layer, which helps you to define logical addressing so that any endpoint should be identified.

The layer also helps you implement routing of packets through a network. It helps you to define the best path, which allows you to take data from the source to the destination.

The data link layer is subdivided into two types of sublayers:

• Media Access Control (MAC) layer- It is responsible for controlling how device in a network gain access to medium and permits to transmit data.
• Logical link control layer- This layer is responsible for identity and encapsulating network-layer protocols and allows you to find the error.

Important Functions of Datalink Layer

• Framing which divides the data from Network layer into frames.
• Allows you to add header to the frame to define the physical address of the source and the destination machine
• Adds Logical addresses of the sender and receivers
• It is also responsible for the sourcing process to the destination process delivery of the entire message.
• It also offers a system for error control in which it detects retransmits damage or lost frames.
• Datalink layer also provides a mechanism to transmit data over independent networks which are linked together.

Transport Layer

The transport layer builds on the network layer to provide data transport from a process on a source machine to a process on a destination machine. It is hosted using single or multiple networks, and also maintains the quality of service functions.

It determines how much data should be sent where and at what rate. This layer builds on the message which are received from the application layer. It helps ensure that data units are delivered error-free and in sequence.

Transport layer helps you to control the reliability of a link through flow control, error control, and segmentation or desegmentation.

The transport layer also offers an acknowledgment of the successful data transmission and sends the next data in case no errors occurred. TCP is the best-known example of the transport layer.

Important functions of Transport Layers

• It divides the message received from the session layer into segments and numbers them to make a sequence.
• Transport layer makes sure that the message is delivered to the correct process on the destination machine.
• It also makes sure that the entire message arrives without any error else it should be retransmitted.

Network Layer

The network layer provides the functional and procedural means of transferring variable length data sequences from one node to another connected in “different networks”.

Message delivery at the network layer does not give any guaranteed to be reliable network layer protocol.

Layer-management protocols that belong to the network layer are:

• routing protocols
• multicast group management
• network-layer address assignment.

Session Layer

Session Layer controls the dialogues between computers. It helps you to establish starting and terminating the connections between the local and remote application.

This layer request for a logical connection which should be established on end user’s requirement. This layer handles all the important log-on or password validation.

Session layer offers services like dialog discipline, which can be duplex or half-duplex. It is mostly implemented in application environments that use remote procedure calls.

Important function of Session Layer

• It establishes, maintains, and ends a session.
• Session layer enables two systems to enter into a dialog
• It also allows a process to add a checkpoint to steam of data.

Presentation Layer

Presentation layer allows you to define the form in which the data is to exchange between the two communicating entities. It also helps you to handles data compression and data encryption.

This layer transforms data into the form which is accepted by the application. It also formats and encrypts data which should be sent across all the networks. This layer is also known as a syntax layer .

The function of Presentation Layers

• Character code translation from ASCII to EBCDIC.
• Data compression: Allows to reduce the number of bits that needs to be transmitted on the network.
• Data encryption: Helps you to encrypt data for security purposes — for example, password encryption.
• It provides a user interface and support for services like email and file transfer.

Application Layer

Application layer interacts with an application program, which is the highest level of OSI model. The application layer is the OSI layer, which is closest to the end-user. It means OSI application layer allows users to interact with other software application.

Application layer interacts with software applications to implement a communicating component. The interpretation of data by the application program is always outside the scope of the OSI model.

Example of the application layer is an application such as file transfer, email, remote login, etc.

The function of the Application Layers are

• Application-layer helps you to identify communication partners, determining resource availability, and synchronizing communication.
• It allows users to log on to a remote host
• This layer provides various e-mail services
• This application offers distributed database sources and access for global information about various objects and services.

Interaction Between OSI Model Layers

Information sent from a one computer application to another needs to pass through each of the OSI layers.

This is explained in the below-given example:

• Every layer within an OSI model communicates with the other two layers which are below it and its peer layer in some another networked computing system.
• In the below-given diagram, you can see that the data link layer of the first system communicates with two layers, the network layer and the physical layer of the system. It also helps you to communicate with the data link layer of, the second system.

Protocols supported at various levels

Differences between osi & tcp/ip.

Here, are some important differences between the OSI & TCP/IP model:

Advantages of the OSI Model

Here, are major benefits/pros of using the OSI model :

• It helps you to standardize router, switch, motherboard, and other hardware
• Reduces complexity and standardizes interfaces
• Facilitates modular engineering
• Helps you to ensure interoperable technology
• Helps you to accelerate the evolution
• Protocols can be replaced by new protocols when technology changes.
• Provide support for connection-oriented services as well as connectionless service.
• It is a standard model in computer networking.
• Supports connectionless and connection-oriented services.
• Offers flexibility to adapt to various types of protocols

Disadvantages of the OSI Model

Here are some cons/ drawbacks of using OSI Model:

• Fitting of protocols is a tedious task.
• You can only use it as a reference model.
• Doesn’t define any specific protocol.
• In the OSI network layer model, some services are duplicated in many layers such as the transport and data link layers
• Layers can’t work in parallel as each layer need to wait to obtain data from the previous layer.
• The OSI Model is a logical and conceptual model that defines network communication which is used by systems open to interconnection and communication with other systems
• In OSI model, layer should only be created where the definite levels of abstraction are needed.
• OSI layer helps you to understand communication over a network
• Straight Through Cables vs Crossover Cables
• Address Resolution Protocol: What is ARP Header in Networking
• VLAN Trunking Protocol: What is VTP in Networking & Benefits
• STP – Spanning Tree Protocol Explained
• What is IP Routing? Types, Routing Table, Protocols, Commands
• Layer 2 Switch vs Layer 3 Switch
• Subnetting: What is Subnet Mask?
• What is Wildcard Mask? How to Calculate Wildcard Mask

• Bahasa Indonesia
• Sign out of AWS Builder ID
• AWS Management Console
• Account Settings
• Billing & Cost Management
• Security Credentials
• AWS Personal Health Dashboard
• Support Center
• Expert Help
• Knowledge Center
• AWS Support Overview
• AWS re:Post
• What is Cloud Computing?
• Cloud Computing Concepts Hub
• Networking & Content Delivery

What is OSI Model?

What is the OSI Model?

The Open Systems Interconnection (OSI) model is a conceptual framework that divides network communications functions into seven layers. Sending data over a network is complex because various hardware and software technologies must work cohesively across geographical and political boundaries. The OSI data model provides a universal language for computer networking, so diverse technologies can communicate using standard protocols or rules of communication. Every technology in a specific layer must provide certain capabilities and perform specific functions to be useful in networking. Technologies in the higher layers benefit from abstraction as they can use lower-level technologies without having to worry about underlying implementation details.

Why is the OSI model important?

The layers of the Open Systems Interconnection (OSI) model encapsulate every type of network communication across both software and hardware components. The model was designed to allow two standalone systems to communicate via standardised interfaces or protocols based on the current layer of operation.

The benefits of the OSI model are given next.

Shared understanding of complex systems

Engineers can use the OSI model to organize and model complex networked system architectures. They can separate the operating layer of each system component according to its main functionality. The ability to decompose a system into smaller, manageable parts via abstraction makes it easier for people to conceptualize it as a whole.

Faster research and development

With the OSI reference model, engineers can understand their work better. They know which technological layer (or layers) they’re developing for when they create new, networked systems that need to communicate with each other. Engineers can develop networked systems and take advantage of a series of repeatable processes and protocols. 

Flexible standardization

The OSI model does not specify the protocols to use between levels, but rather the tasks that protocols perform. It standardizes network communication development so people can rapidly understand, build, and decompose highly complex systems—all  without prior knowledge of the system. It also abstracts details, so engineers don’t require the understanding of every aspect of the model. In modern applications, the lower levels of networking and protocols are abstracted away to simplify system design and development. The following image shows how the OSI model is used in modern application development.

What are the seven layers of the OSI model?

The Open Systems Interconnection (OSI) model was developed by the International Organization for Standardization and others in the late 1970s. It was published in its first form in 1984 as ISO 7498, with the current version being ISO/IEC 7498-1:1994. The seven layers of the model are given next.

Physical layer

The physical layer refers to the physical communication medium and the technologies to transmit data across that medium. At its core, data communication is the transfer of digital and electronic signals through various physical channels like fiber-optic cables, copper cabling, and air. The physical layer includes standards for technologies and metrics closely related with the channels, such as Bluetooth, NFC, and data transmission speeds.

Data link layer

The data link layer refers to the technologies used to connect two machines across a network where the physical layer already exists. It manages data frames, which are digital signals encapsulated into data packets. Flow control and error control of data are often key focuses of the data link layer. Ethernet is an example of a standard at this level. The data link layer is often split into two sub-layers: the Media Access Control (MAC) layer and Logical Link Control (LLC) layer. 

Network layer

The network layer is concerned with concepts such as routing, forwarding, and addressing across a dispersed network or multiple connected networks of nodes or machines. The network layer may also manage flow control. Across the internet, the Internet Protocol v4 (IPv4) and IPv6 are used as the main network layer protocols.

Transport layer

The primary focus of the transport layer is to ensure that data packets arrive in the right order, without losses or errors, or can be seamlessly recovered if required. Flow control, along with error control, is often a focus at the transport layer. At this layer, commonly used protocols include the Transmission Control Protocol (TCP), a near-lossless connection-based protocol, and the User Datagram Protocol (UDP), a lossy connectionless protocol. TCP is commonly used where all data must be intact (e.g. file share), whereas UDP is used when retaining all packets is less critical (e.g. video streaming).

Session layer

The session layer is responsible for network coordination between two separate applications in a session. A session manages the beginning and ending of a one-to-one application connection and synchronization conflicts. Network File System (NFS) and Server Message Block (SMB) are commonly used protocols at the session layer.

Presentation layer

The presentation layer is primarily concerned with the syntax of the data itself for applications to send and consume. For example, Hypertext Markup Language (HTML) , JavaScipt Object Notation (JSON) , and Comma Separated Values (CSV) are all modeling languages to describe the structure of data at the presentation layer. 

Application layer

The application layer is concerned with the specific type of application itself and its standardized communication methods. For example, browsers can communicate using HyperText Transfer Protocol Secure (HTTPS), and HTTP and email clients can communicate using POP3 (Post Office Protocol version 3) and SMTP (Simple Mail Transfer Protocol).

Not all systems that use the OSI model implement every layer.

How does communication happen in the OSI model?

The layers in the Open Systems Interconnection (OSI) model are designed so that an application can communicate over a network with another application on a different device, no matter the complexity of the application and underlying systems. To do this, various standards and protocols are used to communicate with the layer above or below. Each of the layers is independent and only aware of the interfaces to communicate with the layer above and below it. 

By chaining together all these layers and protocols, complex data communications can be sent from one high-level application to another. The process works as follows:

• The sender’s application layer passes data communication down to the next lower layer.
• Each layer adds its own headers and addressing to the data before passing it on. 
• Data communication moves down the layers until it is eventually transmitted through the physical medium.
• At the other end of the medium, each layer processes the data according to the relevant headers at that level. 
• At the receiver end, data moves up the layer and is gradually unpacked until the application at the other end receives it.

What are alternatives to the OSI model?

Various networking models were used in the past, such as Sequenced Packet Exchange/Internet Packet Exchange (SPX/IPX) and Network Basic Input Output System (NetBIOS). Today, the main alternative to the Open Systems Interconnection (OSI) model is the TCP/IP model.

The TCP/IP model

The TCP/IP model is comprised of five different layers:

• The physical layer
• The data link layer
• The network layer
• The transport layer
• They application layer

While layers like the physical layer, network layer, and application layer appear to map directly to the OSI model, this isn’t quite the case. Instead, the TCP/IP model most accurately maps to the structure and protocols of the internet.

The OSI model remains a popular networking model to describe how networking operates from a holistic perspective for educational purposes. However, the TCP/IP model is now more commonly used in practice.

A note on proprietary protocols and models

It’s important to note that not all internet-based systems and applications follow the TCP/IP model or the OSI model. Similarly, not all offline-based networked systems and applications use the OSI model or any other model.

Both the OSI and TCP/IP models are open standards. They’re designed so that anyone can use them, or further build them out to meet specific requirements.

Organizations also design their own internal, proprietary standards, including protocols and models, that are closed-source and only for use within their systems. Sometimes, they may subsequently release them to the public for interoperability and further community development. An example is s2n-tls, a TLS protocol that was originally a proprietary Amazon Web Services (AWS) protocol but is now open source.

How can AWS meet your computer networking requirements?

AWS helps organizations design, deploy, and scale networked systems and applications with less friction. 

We have a robust suite of AWS Networking and Content Delivery offerings. They’re designed to complement and integrate with your internal applications and services, across all levels of network operations. Here are some examples:

• AWS App Mesh provides secure, application-level networking for all your services, with built-in communications monitoring and control
• Amazon CloudFront is a content delivery network (CDN) service built for high performance, security, and developer convenience
• AWS Direct Connect offers a direct connection, which doesn’t touch the internet, from your organization to your AWS resources
• Elastic Load Balancing (ELB)  distributes incoming network traffic across AWS targets to improve application scalability

Get started with networked systems and applications on AWS by creating an account today.

Next Steps on AWS

Ending Support for Internet Explorer

Computer Network

• Operating Systems
• Computer Fundamentals
• Interview Q

Physical Layer

Data link layer, network layer, routing algorithm, transport layer, application layer, application protocols, network security.

Interview Questions

• Send your Feedback to [email protected]

Help Others, Please Share

Learn Latest Tutorials

Transact-SQL

Reinforcement Learning

R Programming

React Native

Python Design Patterns

Python Pillow

Python Turtle

Preparation

Verbal Ability

Company Questions

Trending Technologies

Artificial Intelligence

Cloud Computing

Data Science

Machine Learning

B.Tech / MCA

Data Structures

Operating System

Compiler Design

Computer Organization

Discrete Mathematics

Ethical Hacking

Computer Graphics

Software Engineering

Web Technology

Cyber Security

C Programming

Control System

Data Mining

Data Warehouse

• Engineering Mathematics
• Discrete Mathematics
• Operating System
• Computer Networks
• Digital Logic and Design
• C Programming
• Data Structures
• Theory of Computation
• Compiler Design
• Computer Org and Architecture
• Computer Network Tutorial

Basics of Computer Network

• Basics of Computer Networking
• Introduction to basic Networking Terminology
• Goals of Networks
• Basic characteristics of Computer Networks
• Challenges of Computer Network
• Physical Components of Computer Network

Network Hardware and Software

• Types of Computer Networks
• LAN Full Form
• How to Set Up a LAN Network?
• MAN Full Form in Computer Networking
• MAN Full Form
• WAN Full Form
• Introduction of Internetworking
• Difference between Internet, Intranet and Extranet
• Protocol Hierarchies in Computer Network
• Network Devices (Hub, Repeater, Bridge, Switch, Router, Gateways and Brouter)
• Introduction of a Router
• Introduction of Gateways
• What is a network switch, and how does it work?

Network Topology

• Types of Network Topology
• Difference between Physical and Logical Topology
• What is OSI Model? - Layers of OSI Model
• Physical Layer in OSI Model
• Data Link Layer

Session Layer in OSI model

• Presentation Layer in OSI model
• Application Layer in OSI Model
• Protocol and Standard in Computer Networks
• Examples of Data Link Layer Protocols
• TCP/IP Model
• TCP/IP Ports and Its Applications
• What is Transmission Control Protocol (TCP)?
• TCP 3-Way Handshake Process
• Services and Segment structure in TCP
• TCP Connection Establishment
• TCP Connection Termination
• Fast Recovery Technique For Loss Recovery in TCP
• Difference Between OSI Model and TCP/IP Model

Medium Access Control

• MAC Full Form
• Channel Allocation Problem in Computer Network
• Multiple Access Protocols in Computer Network
• Carrier Sense Multiple Access (CSMA)
• Collision Detection in CSMA/CD
• Controlled Access Protocols in Computer Network

SLIDING WINDOW PROTOCOLS

• Stop and Wait ARQ
• Sliding Window Protocol | Set 3 (Selective Repeat)
• Piggybacking in Computer Networks

IP Addressing

• What is IPv4?
• What is IPv6?
• Introduction of Classful IP Addressing
• Classless Addressing in IP Addressing
• Classful Vs Classless Addressing
• Classless Inter Domain Routing (CIDR)
• Supernetting in Network Layer
• Introduction To Subnetting
• Difference between Subnetting and Supernetting
• Types of Routing
• Difference between Static and Dynamic Routing
• Unicast Routing - Link State Routing
• Distance Vector Routing (DVR) Protocol
• Fixed and Flooding Routing algorithms
• Introduction of Firewall in Computer Network

Congestion Control Algorithms

• Congestion Control in Computer Networks
• Congestion Control techniques in Computer Networks
• Computer Network | Leaky bucket algorithm
• TCP Congestion Control

Network Switching

• Circuit Switching in Computer Network
• Message switching techniques
• Packet Switching and Delays in Computer Network
• Differences Between Virtual Circuits and Datagram Networks

Application Layer:DNS

• Domain Name System (DNS) in Application Layer
• Details on DNS
• Introduction to Electronic Mail
• E-Mail Format
• World Wide Web (WWW)
• HTTP Full Form
• Streaming Stored Video
• What is a Content Distribution Network and how does it work?

CN Interview Quetions

• Top 50 Networking Interview Questions (2024)
• Top 50 TCP/IP interview questions and answers
• Top 50 IP addressing interview questions and answers
• Last Minute Notes - Computer Networks
• Computer Network - Cheat Sheet
• Network Layer
• Transport Layer
• Application Layer

Prerequisite : OSI Layer

Introduction : The Session Layer is the 5th layer in the Open System Interconnection (OSI) model. This layer allows users on different machines to establish active communications sessions between them. It is responsible for establishing, maintaining, synchronizing, terminating sessions between end-user applications. In Session Layer, streams of data are received and further marked, which is then resynchronized properly, so that the ends of the messages are not cut initially and further data loss is avoided. This layer basically establishes a connection between the session entities. This layer handles and manipulates data which it receives from the Session Layer as well as from the Presentation Layer.

Working of Session Layer : Session Layer, which is the 5th layer in the OSI model, uses the services provided by The transport layer, enables applications to establish and maintain sessions and to synchronize the sessions.  Now, in order to establish a session connection, several things should be followed.

First thing is we should map the session address to the shipping address. The second thing is that we need to select the required transport quality of service (also referred as QoS) parameters. Next thing is we need to take care of the negotiations which should happen between session parameters. Then we further need to transmit limited transparent user data. Then at last, we need to monitor Data Transfer phase properly. The ability to send larger amount of data files is extremely important and a necessary thing too.

Functions of Session Layer : The session layer being the fifth layer in the OSI model performs several different as well as important functions which are need for establishing as well as maintaining a safe and secure connection.

Following are some of the functions which are performed by Session Layer –

• Session Layer works as a dialog controller through which it allows systems to communicate in either half-duplex mode or full duplex mode of communication.
• This layer is also responsible for token management, through which it prevents two users to simultaneously access or attempting the same critical operation.
• This layer allows synchronization by allowing the process of adding checkpoints, which are considered as synchronization points to the streams of data.
• This layer is also responsible for session checkpointing and recovery.
• This layer basically provides a mechanism of opening, closing and managing a session between the end-user application processes.
• The services offered by Session Layer are generally implemented in application environments using remote procedure calls (RPCs).
• The Session Layer is also responsible for synchronizing information from different sources.
• This layer also controls single or multiple connections for each-end user application and directly communicates with both Presentation and transport layers.
• Session Layer creates procedures for checkpointing followed by adjournment, restart and termination.
• Session Layer uses checkpoints to enable communication sessions which are to be resumed from that particular checkpoint at which communication failure has occurred.
• The session Layer is responsible for fetching or receiving data information from its previous layer (transport layer) and further sends data to the layer after it (presentation layer).

Session Layer Protocols : Session Layer uses some protocols which are required for safe, secure and accurate communication which exists between two-ender user applications. Following are some of the protocols provided or used by the Session Layer –

• AppleTalk Data Stream Protocol (ADSP): ADSP is that type of protocol which was developed by Apple Inc. and it includes a number of features that allow local area networks to be connected with no prior setup. This protocol was released in 1985.  This protocol rigorously followed the OSI model of protocol layering. ADSP itself has two protocols named: AppleTalk Address Resolution Protocol (AARP) and Name Binding Protocol (NBP), both aimed at making system self-configuring.
• Real-time Transport Control Protocol (RTCP): RTCP is a protocol which provides out-of-band statistics and control information for an RTP (Real-time Transport Protocol) session. RTCP’s primary function is to provide feedback on the quality of service (QoS) in media distribution by periodically sending statistical information such as transmitted octet and packet counts or packet loss to the participants in the streaming multimedia session.
• Point-to-Point Tunneling Protocol (PPTP): PPTP is a protocol which provides a method for implementing virtual private networks. PPTP uses a TCP control channel and a Generic Routing Encapsulation tunnel to encapsulate PPP (Point-to-Point Protocol) packets This protocol provides security levels and remote access levels comparable with typical VPN (Virtual Private Network) products.
• Password Authentication Protocol (PAP): Password Authentication Protocol is a password-based authentication protocol used by Point to Point Protocol (PPP) to validate users. Almost all network operating systems, remote servers support PAP. PAP authentication is done at the time of the initial link establishment and verifies the identity of the client using a two-way handshake (Client-sends data and server in return sends Authentication-ACK (Acknowledgement) after the data sent by client is verified completely).
• Remote Procedure Call Protocol (RPCP): Remote Procedure Call Protocol (RPCP) is a protocol that is used when a computer program causes a procedure (or a sub-routine) to execute in a different address space without the programmer explicitly coding the details for the remote interaction. This is basically the form of client-server interaction, typically implemented via a request-response message-passing system.
• Sockets Direct Protocol (SDP): Sockets Direct Protocol (SDP) is a protocol that supports streams of sockets over Remote Direct Memory Access (RDMA) network fabrics. The purpose of SDP is to provide an RDMA-accelerated alternative to the TCP protocol. The primary goal is to perform one particular thing in such a manner which is transparent to the application.

Please Login to comment...

• AI-Coustics: Fights Noisy Audio With Generative AI
• Google Search Will Now Show You AI-summarised Results Whether You Want Them Or Not
• WhatsApp Testing AI-Powered Image Editor For Messenger App
• Epic Games Store Coming to iOS and Android This Year
• 30 OOPs Interview Questions and Answers (2024)

Improve your Coding Skills with Practice

What kind of Experience do you want to share?