bash attempted assignment to non variable

Home > Bash Scripting Tutorial > Bash Variables > Variable Declaration and Assignment > How to Assign Variable in Bash Script? [8 Practical Cases]

How to Assign Variable in Bash Script? [8 Practical Cases]

Variables allow you to store and manipulate data within your script, making it easier to organize and access information. In Bash scripts , variable assignment follows a straightforward syntax, but it offers a range of options and features that can enhance the flexibility and functionality of your scripts. In this article, I will discuss modes to assign variable in the Bash script . As the Bash script offers a range of methods for assigning variables, I will thoroughly delve into each one.

Key Takeaways

• Getting Familiar With Different Types Of Variables.
• Learning how to assign single or multiple bash variables.
• Understanding the arithmetic operation in Bash Scripting.

Free Downloads

Local vs global variable assignment.

In programming, variables are used to store and manipulate data. There are two main types of variable assignments: local and global .

A. Local Variable Assignment

In programming, a local variable assignment refers to the process of declaring and assigning a variable within a specific scope, such as a function or a block of code. Local variables are temporary and have limited visibility, meaning they can only be accessed within the scope in which they are defined.

Here are some key characteristics of local variable assignment:

• Local variables in bash are created within a function or a block of code.
• By default, variables declared within a function are local to that function.
• They are not accessible outside the function or block in which they are defined.
• Local variables typically store temporary or intermediate values within a specific context.

Here is an example in Bash script.

In this example, the variable x is a local variable within the scope of the my_function function. It can be accessed and used within the function, but accessing it outside the function will result in an error because the variable is not defined in the outer scope.

B. Global Variable Assignment

In Bash scripting, global variables are accessible throughout the entire script, regardless of the scope in which they are declared. Global variables can be accessed and modified from any script part, including within functions.

Here are some key characteristics of global variable assignment:

• Global variables in bash are declared outside of any function or block.
• They are accessible throughout the entire script.
• Any variable declared outside of a function or block is considered global by default.
• Global variables can be accessed and modified from any script part, including within functions.

Here is an example in Bash script given in the context of a global variable .

It’s important to note that in bash, variable assignment without the local keyword within a function will create a global variable even if there is a global variable with the same name. To ensure local scope within a function , using the local keyword explicitly is recommended.

Additionally, it’s worth mentioning that subprocesses spawned by a bash script, such as commands executed with $(…) or backticks , create their own separate environments, and variables assigned within those subprocesses are not accessible in the parent script .

8 Different Cases to Assign Variables in Bash Script

In Bash scripting , there are various cases or scenarios in which you may need to assign variables. Here are some common cases I have described below. These examples cover various scenarios, such as assigning single variables , multiple variable assignments in a single line , extracting values from command-line arguments , obtaining input from the user , utilizing environmental variables, etc . So let’s start.

Case 01: Single Variable Assignment

To assign a value to a single variable in Bash script , you can use the following syntax:

However, replace the variable with the name of the variable you want to assign, and the value with the desired value you want to assign to that variable.

To assign a single value to a variable in Bash , you can go in the following manner:

Steps to Follow >

❶ At first, launch an Ubuntu Terminal .

❷ Write the following command to open a file in Nano :

• nano : Opens a file in the Nano text editor.
• single_variable.sh : Name of the file.

❸ Copy the script mentioned below:

The first line #!/bin/bash specifies the interpreter to use ( /bin/bash ) for executing the script. Next, variable var_int contains an integer value of 23 and displays with the echo command .

❹ Press CTRL+O and ENTER to save the file; CTRL+X to exit.

❺ Use the following command to make the file executable :

• chmod : changes the permissions of files and directories.
• u+x : Here, u refers to the “ user ” or the owner of the file and +x specifies the permission being added, in this case, the “ execute ” permission. When u+x is added to the file permissions, it grants the user ( owner ) permission to execute ( run ) the file.
• single_variable.sh : File name to which the permissions are being applied.

❻ Run the script by using the following command:

Case 02: Multi-Variable Assignment in a Single Line of a Bash Script

Multi-variable assignment in a single line is a concise and efficient way of assigning values to multiple variables simultaneously in Bash scripts . This method helps reduce the number of lines of code and can enhance readability in certain scenarios. Here’s an example of a multi-variable assignment in a single line.

You can follow the steps of Case 01 , to save & make the script executable.

Script (multi_variable.sh) >

The first line #!/bin/bash specifies the interpreter to use ( /bin/bash ) for executing the script. Then, three variables x , y , and z are assigned values 1 , 2 , and 3 , respectively. The echo statements are used to print the values of each variable. Following that, two variables var1 and var2 are assigned values “ Hello ” and “ World “, respectively. The semicolon (;) separates the assignment statements within a single line. The echo statement prints the values of both variables with a space in between. Lastly, the read command is used to assign values to var3 and var4. The <<< syntax is known as a here-string , which allows the string “ Hello LinuxSimply ” to be passed as input to the read command . The input string is split into words, and the first word is assigned to var3 , while the remaining words are assigned to var4 . Finally, the echo statement displays the values of both variables.

Case 03: Assigning Variables From Command-Line Arguments

In Bash , you can assign variables from command-line arguments using special variables known as positional parameters . Here is a sample code demonstrated below.

Script (var_as_argument.sh) >

The provided Bash script starts with the shebang ( #!/bin/bash ) to use Bash shell. The script assigns the first command-line argument to the variable name , the second argument to age , and the third argument to city . The positional parameters $1 , $2 , and $3 , which represent the values passed as command-line arguments when executing the script. Then, the script uses echo statements to display the values of the assigned variables.

Case 04: Assign Value From Environmental Bash Variable

In Bash , you can also assign the value of an Environmental Variable to a variable. To accomplish the task you can use the following syntax :

However, make sure to replace ENV_VARIABLE_NAME with the actual name of the environment variable you want to assign. Here is a sample code that has been provided for your perusal.

Script (env_variable.sh) >

The first line #!/bin/bash specifies the interpreter to use ( /bin/bash ) for executing the script. The value of the USER environment variable, which represents the current username, is assigned to the Bash variable username. Then the output is displayed using the echo command.

Case 05: Default Value Assignment

In Bash , you can assign default values to variables using the ${variable:-default} syntax . Note that this default value assignment does not change the original value of the variable; it only assigns a default value if the variable is empty or unset . Here’s a script to learn how it works.

Script (default_variable.sh) >

The first line #!/bin/bash specifies the interpreter to use ( /bin/bash ) for executing the script. The next line stores a null string to the variable . The ${ variable:-Softeko } expression checks if the variable is unset or empty. As the variable is empty, it assigns the default value ( Softeko in this case) to the variable . In the second portion of the code, the LinuxSimply string is stored as a variable. Then the assigned variable is printed using the echo command .

Case 06: Assigning Value by Taking Input From the User

In Bash , you can assign a value from the user by using the read command. Remember we have used this command in Case 2 . Apart from assigning value in a single line, the read command allows you to prompt the user for input and assign it to a variable. Here’s an example given below.

Script (user_variable.sh) >

The first line #!/bin/bash specifies the interpreter to use ( /bin/bash ) for executing the script. The read command is used to read the input from the user and assign it to the name variable . The user is prompted with the message “ Enter your name: “, and the value they enter is stored in the name variable. Finally, the script displays a message using the entered value.

Case 07: Using the “let” Command for Variable Assignment

In Bash , the let command can be used for arithmetic operations and variable assignment. When using let for variable assignment, it allows you to perform arithmetic operations and assign the result to a variable .

Script (let_var_assign.sh) >

The first line #!/bin/bash specifies the interpreter to use ( /bin/bash ) for executing the script. then the let command performs arithmetic operations and assigns the results to variables num. Later, the echo command has been used to display the value stored in the num variable.

Case 08: Assigning Shell Command Output to a Variable

Lastly, you can assign the output of a shell command to a variable using command substitution . There are two common ways to achieve this: using backticks ( “) or using the $()   syntax. Note that $() syntax is generally preferable over backticks as it provides better readability and nesting capability, and it avoids some issues with quoting. Here’s an example that I have provided using both cases.

Script (shell_command_var.sh) >

The first line #!/bin/bash specifies the interpreter to use ( /bin/bash ) for executing the script. The output of the ls -l command (which lists the contents of the current directory in long format) allocates to the variable output1 using backticks . Similarly, the output of the date command (which displays the current date and time) is assigned to the variable output2 using the $() syntax . The echo command displays both output1 and output2 .

Assignment on Assigning Variables in Bash Scripts

Finally, I have provided two assignments based on today’s discussion. Don’t forget to check this out.

• Difference: ?
• Quotient: ?
• Remainder: ?
• Write a Bash script to find and display the name of the largest file using variables in a specified directory.

In conclusion, assigning variable Bash is a crucial aspect of scripting, allowing developers to store and manipulate data efficiently. This article explored several cases to assign variables in Bash, including single-variable assignments , multi-variable assignments in a single line , assigning values from environmental variables, and so on. Each case has its advantages and limitations, and the choice depends on the specific needs of the script or program. However, if you have any questions regarding this article, feel free to comment below. I will get back to you soon. Thank You!

People Also Ask

Related Articles

• How to Declare Variable in Bash Scripts? [5 Practical Cases]
• Bash Variable Naming Conventions in Shell Script [6 Rules]
• How to Check Variable Value Using Bash Scripts? [5 Cases]
• How to Use Default Value in Bash Scripts? [2 Methods]
• How to Use Set – $Variable in Bash Scripts? [2 Examples]
• How to Read Environment Variables in Bash Script? [2 Methods]
• How to Export Environment Variables with Bash? [4 Examples]

<< Go Back to Variable Declaration and Assignment  | Bash Variables | Bash Scripting Tutorial

Mohammad Shah Miran

Hey, I'm Mohammad Shah Miran, previously worked as a VBA and Excel Content Developer at SOFTEKO, and for now working as a Linux Content Developer Executive in LinuxSimply Project. I completed my graduation from Bangladesh University of Engineering and Technology (BUET). As a part of my job, i communicate with Linux operating system, without letting the GUI to intervene and try to pass it to our audience.

Leave a Comment Cancel reply

Save my name, email, and website in this browser for the next time I comment.

How-To Geek

How to work with variables in bash.

Want to take your Linux command-line skills to the next level? Here's everything you need to know to start working with variables.

Hannah Stryker / How-To Geek

Quick Links

Variables 101, examples of bash variables, how to use bash variables in scripts, how to use command line parameters in scripts, working with special variables, environment variables, how to export variables, how to quote variables, echo is your friend, key takeaways.

• Variables are named symbols representing strings or numeric values. They are treated as their value when used in commands and expressions.
• Variable names should be descriptive and cannot start with a number or contain spaces. They can start with an underscore and can have alphanumeric characters.
• Variables can be used to store and reference values. The value of a variable can be changed, and it can be referenced by using the dollar sign $ before the variable name.

Variables are vital if you want to write scripts and understand what that code you're about to cut and paste from the web will do to your Linux computer. We'll get you started!

Variables are named symbols that represent either a string or numeric value. When you use them in commands and expressions, they are treated as if you had typed the value they hold instead of the name of the variable.

To create a variable, you just provide a name and value for it. Your variable names should be descriptive and remind you of the value they hold. A variable name cannot start with a number, nor can it contain spaces. It can, however, start with an underscore. Apart from that, you can use any mix of upper- and lowercase alphanumeric characters.

Here, we'll create five variables. The format is to type the name, the equals sign = , and the value. Note there isn't a space before or after the equals sign. Giving a variable a value is often referred to as assigning a value to the variable.

We'll create four string variables and one numeric variable,

my_name=Dave

my_boost=Linux

his_boost=Spinach

this_year=2019

To see the value held in a variable, use the echo command. You must precede the variable name with a dollar sign $ whenever you reference the value it contains, as shown below:

echo $my_name

echo $my_boost

echo $this_year

Let's use all of our variables at once:

echo "$my_boost is to $me as $his_boost is to $him (c) $this_year"

The values of the variables replace their names. You can also change the values of variables. To assign a new value to the variable, my_boost , you just repeat what you did when you assigned its first value, like so:

my_boost=Tequila

If you re-run the previous command, you now get a different result:

So, you can use the same command that references the same variables and get different results if you change the values held in the variables.

We'll talk about quoting variables later. For now, here are some things to remember:

• A variable in single quotes ' is treated as a literal string, and not as a variable.
• Variables in quotation marks " are treated as variables.
• To get the value held in a variable, you have to provide the dollar sign $ .
• A variable without the dollar sign $ only provides the name of the variable.

You can also create a variable that takes its value from an existing variable or number of variables. The following command defines a new variable called drink_of_the_Year, and assigns it the combined values of the my_boost and this_year variables:

drink_of-the_Year="$my_boost $this_year"

echo drink_of_the-Year

Scripts would be completely hamstrung without variables. Variables provide the flexibility that makes a script a general, rather than a specific, solution. To illustrate the difference, here's a script that counts the files in the /dev directory.

Type this into a text file, and then save it as fcnt.sh (for "file count"):

#!/bin/bashfolder_to_count=/devfile_count=$(ls $folder_to_count | wc -l)echo $file_count files in $folder_to_count

Before you can run the script, you have to make it executable, as shown below:

chmod +x fcnt.sh

Type the following to run the script:

This prints the number of files in the /dev directory. Here's how it works:

• A variable called folder_to_count is defined, and it's set to hold the string "/dev."
• Another variable, called file_count , is defined. This variable takes its value from a command substitution. This is the command phrase between the parentheses $( ) . Note there's a dollar sign $ before the first parenthesis. This construct $( ) evaluates the commands within the parentheses, and then returns their final value. In this example, that value is assigned to the file_count variable. As far as the file_count variable is concerned, it's passed a value to hold; it isn't concerned with how the value was obtained.
• The command evaluated in the command substitution performs an ls file listing on the directory in the folder_to_count variable, which has been set to "/dev." So, the script executes the command "ls /dev."
• The output from this command is piped into the wc command. The -l (line count) option causes wc to count the number of lines in the output from the ls command. As each file is listed on a separate line, this is the count of files and subdirectories in the "/dev" directory. This value is assigned to the file_count variable.
• The final line uses echo to output the result.

But this only works for the "/dev" directory. How can we make the script work with any directory? All it takes is one small change.

Many commands, such as ls and wc , take command line parameters. These provide information to the command, so it knows what you want it to do. If you want ls to work on your home directory and also to show hidden files , you can use the following command, where the tilde ~ and the -a (all) option are command line parameters:

Our scripts can accept command line parameters. They're referenced as $1 for the first parameter, $2 as the second, and so on, up to $9 for the ninth parameter. (Actually, there's a $0 , as well, but that's reserved to always hold the script.)

You can reference command line parameters in a script just as you would regular variables. Let's modify our script, as shown below, and save it with the new name fcnt2.sh :

#!/bin/bashfolder_to_count=$1file_count=$(ls $folder_to_count | wc -l)echo $file_count files in $folder_to_count

This time, the folder_to_count variable is assigned the value of the first command line parameter, $1 .

The rest of the script works exactly as it did before. Rather than a specific solution, your script is now a general one. You can use it on any directory because it's not hardcoded to work only with "/dev."

Here's how you make the script executable:

chmod +x fcnt2.sh

Now, try it with a few directories. You can do "/dev" first to make sure you get the same result as before. Type the following:

./fnct2.sh /dev

./fnct2.sh /etc

./fnct2.sh /bin

You get the same result (207 files) as before for the "/dev" directory. This is encouraging, and you get directory-specific results for each of the other command line parameters.

To shorten the script, you could dispense with the variable, folder_to_count , altogether, and just reference $1 throughout, as follows:

#!/bin/bash file_count=$(ls $1 wc -l) echo $file_count files in $1

We mentioned $0 , which is always set to the filename of the script. This allows you to use the script to do things like print its name out correctly, even if it's renamed. This is useful in logging situations, in which you want to know the name of the process that added an entry.

The following are the other special preset variables:

• $# : How many command line parameters were passed to the script.
• $@ : All the command line parameters passed to the script.
• $? : The exit status of the last process to run.
• $$ : The Process ID (PID) of the current script.
• $USER : The username of the user executing the script.
• $HOSTNAME : The hostname of the computer running the script.
• $SECONDS : The number of seconds the script has been running for.
• $RANDOM : Returns a random number.
• $LINENO : Returns the current line number of the script.

You want to see all of them in one script, don't you? You can! Save the following as a text file called, special.sh :

#!/bin/bashecho "There were $# command line parameters"echo "They are: $@"echo "Parameter 1 is: $1"echo "The script is called: $0"# any old process so that we can report on the exit statuspwdecho "pwd returned $?"echo "This script has Process ID $$"echo "The script was started by $USER"echo "It is running on $HOSTNAME"sleep 3echo "It has been running for $SECONDS seconds"echo "Random number: $RANDOM"echo "This is line number $LINENO of the script"

Type the following to make it executable:

chmod +x special.sh

Now, you can run it with a bunch of different command line parameters, as shown below.

Bash uses environment variables to define and record the properties of the environment it creates when it launches. These hold information Bash can readily access, such as your username, locale, the number of commands your history file can hold, your default editor, and lots more.

To see the active environment variables in your Bash session, use this command:

If you scroll through the list, you might find some that would be useful to reference in your scripts.

When a script runs, it's in its own process, and the variables it uses cannot be seen outside of that process. If you want to share a variable with another script that your script launches, you have to export that variable. We'll show you how to this with two scripts.

First, save the following with the filename script_one.sh :

#!/bin/bashfirst_var=alphasecond_var=bravo# check their valuesecho "$0: first_var=$first_var, second_var=$second_var"export first_varexport second_var./script_two.sh# check their values againecho "$0: first_var=$first_var, second_var=$second_var"

This creates two variables, first_var and second_var , and it assigns some values. It prints these to the terminal window, exports the variables, and calls script_two.sh . When script_two.sh terminates, and process flow returns to this script, it again prints the variables to the terminal window. Then, you can see if they changed.

The second script we'll use is script_two.sh . This is the script that script_one.sh calls. Type the following:

#!/bin/bash# check their valuesecho "$0: first_var=$first_var, second_var=$second_var"# set new valuesfirst_var=charliesecond_var=delta# check their values againecho "$0: first_var=$first_var, second_var=$second_var"

This second script prints the values of the two variables, assigns new values to them, and then prints them again.

To run these scripts, you have to type the following to make them executable:

chmod +x script_one.shchmod +x script_two.sh

And now, type the following to launch script_one.sh :

./script_one.sh

This is what the output tells us:

• script_one.sh prints the values of the variables, which are alpha and bravo.
• script_two.sh prints the values of the variables (alpha and bravo) as it received them.
• script_two.sh changes them to charlie and delta.
• script_one.sh prints the values of the variables, which are still alpha and bravo.

What happens in the second script, stays in the second script. It's like copies of the variables are sent to the second script, but they're discarded when that script exits. The original variables in the first script aren't altered by anything that happens to the copies of them in the second.

You might have noticed that when scripts reference variables, they're in quotation marks " . This allows variables to be referenced correctly, so their values are used when the line is executed in the script.

If the value you assign to a variable includes spaces, they must be in quotation marks when you assign them to the variable. This is because, by default, Bash uses a space as a delimiter.

Here's an example:

site_name=How-To Geek

Bash sees the space before "Geek" as an indication that a new command is starting. It reports that there is no such command, and abandons the line. echo shows us that the site_name variable holds nothing — not even the "How-To" text.

Try that again with quotation marks around the value, as shown below:

site_name="How-To Geek"

This time, it's recognized as a single value and assigned correctly to the site_name variable.

It can take some time to get used to command substitution, quoting variables, and remembering when to include the dollar sign.

Before you hit Enter and execute a line of Bash commands, try it with echo in front of it. This way, you can make sure what's going to happen is what you want. You can also catch any mistakes you might have made in the syntax.

Stack Exchange Network

Stack Exchange network consists of 183 Q&A communities including Stack Overflow , the largest, most trusted online community for developers to learn, share their knowledge, and build their careers.

Q&A for work

Connect and share knowledge within a single location that is structured and easy to search.

Bash - variable assignment in a pipeline

I am trying to create a script that monitors for failed login attempts and passes the IP address of those attempts as a variable. But I am having a bit of trouble.

I have the below command which spits out the IP addresses as expected.

But I am struggling with getting them to pass as a variable.

I get this as output.

Any assistance would be much appreciated.

I still had no luck getting the output to pass as a variable, so I just decided to output it to a file.

• command-line

• Cut your original command at each pipe, and see if the output is what you expect. E.g. tail -10 /var/log/authlog , then tail -10 /var/log/authlog | grep '403 Forbidden' , ... . –  waltinator Aug 30, 2023 at 0:29
• Be sure to use the --line-buffered option on both of your grep s. Without it, grep won't output anything until it gets a buffer full of matches, or sees EOF. –  waltinator Aug 30, 2023 at 2:08
• grep -i ssh /var/log/auth.log | grep -i accept | tr -s " " | cut -d" " -f11 | sort -u –  petep Aug 30, 2023 at 2:39
• type "sudo lastb" –  petep Aug 30, 2023 at 2:39

3 Answers 3

Your variable assignment using command substitution in the pipeline is actually working, but in a subshell rather than the current running shell ... That's how a pipeline works in Bash ( i.e. Each command in a multi-command pipeline, where pipes are created, is executed in its own subshell, which is a separate process ) ... Therefor, when the subshell for that part of the pipeline dies, the variable assigned will die with it as well ... Please, compare the following two situations:

Fortunately, Bash has a shell option lastpipe which:

If set, and job control is not active, the shell runs the last command of a pipeline not executed in the background in the current shell environment.

Job Control is deactivated by default for non-interactive Bash shells i.e. the kind that your executable script file is run in with e.g. ./scriptfile ... But, you can deactivate it even in interactive Bash shells with set +m ... Please, compare the following two situations:

Therefore, you can add shopt -s lastpipe to the top of your script file before the pipe-lined commands to enable that behavior.

• I just learned something. Thank you. :) Now is there an advantage (or disadvantage) to using shopt -s lastpipe over what I suggested as an answer? –  mpboden Sep 2, 2023 at 15:48
• 1 You're welcome @mpboden ... It's an honor for me :-) ... In your suggested solution, the assignment happens after the pipeline closes while with lastpipe , the assignment happens while it's open ... Other than that the end result is basically the same AFAIK. –  Raffa Sep 2, 2023 at 16:00

Once you enable the logging by sudo touch /etc/{w,b}tmp , the sudo lastb command will show an up-to-date list of bad logins.

You could also learn from the fail2ban package. fail2ban(1) a set of server and client programs to limit brute force authentication attempts. . Install it and read the documentationn, and the scripts.

Change your command around so that the variable is at the beginning instead of in the middle. Such as the following:

You must log in to answer this question.

Not the answer you're looking for browse other questions tagged command-line bash scripts ..

• The Overflow Blog
• Will antitrust suits benefit developers?
• Are long context windows the end of RAG?
• Featured on Meta
• New Focus Styles & Updated Styling for Button Groups
• Upcoming initiatives on Stack Overflow and across the Stack Exchange network
• AI-generated content is not permitted on Ask Ubuntu

Hot Network Questions

• How many cacti can I plant here?
• What does 人の字 mean here?
• How is this possible: a moon with A) large apparent size B) that spins C) spins in a 5:1 spin-orbit resonance?
• Temporarily replacing one pane of glass in a double-pane door
• Why do we associate negative sign to electric charges when they are a scalar quantity?
• How does energy become sound?
• In The Martian, Mark keeps the largest potatoes for his food supply and replants the smaller ones. Doesn't this cultivate smaller potatoes?
• How does the sequence $C3, $C2, $CD translate to "CBM"?
• How to get random polygons with points ordered mathematical positive?
• Making sense of binary logistic regression results/Interpreting odd ratio in r
• Sewage Pump Controller parts nomenclature
• Where can we find out more details about the recent factoring of RSA-2048?
• How does one "ride on the brake beam"?
• Can "albeit" ever be followed by a complete sentence
• Did Joseph Smith go to heaven according to Protestant Trinitarians?
• Is it appropriate to ask for a raise?
• How can I perform an mDNS lookup on Windows?
• If you have a group of levers, dials, knobs, buttons, &c, what do you call a specific 'snapshot' of the way they are set?
• Is this a correct implementation of Comparator?
• know the conjugation of a verb
• Does a carbon fiber fuselage suffer wear from pressurization/depressurization?
• What were the most common software distribution formats for MacOS Classic?
• A typo made it through the process of one of my publications, and it's bothering me
• Space shooter game using pygame