dissertation paper on solid waste management

An official website of the United States government

The .gov means it’s official. Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

The site is secure. The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

• Publications
• Account settings

Preview improvements coming to the PMC website in October 2024. Learn More or Try it out now .

• Advanced Search
• Journal List
• Int J Environ Res Public Health

Environmental Sustainability Impacts of Solid Waste Management Practices in the Global South

Ismaila rimi abubakar.

1 College of Architecture and Planning, Imam Abdulrahman Bin Faisal University, Dammam 31441, Saudi Arabia

Khandoker M. Maniruzzaman

2 Department of Urban and Regional Planning, College of Architecture and Planning, Imam Abdulrahman Bin Faisal University, Dammam 31441, Saudi Arabia

Umar Lawal Dano

Faez s. alshihri, maher s. alshammari, sayed mohammed s. ahmed, wadee ahmed ghanem al-gehlani.

3 Department of Architecture, College of Architecture and Planning, Imam Abdulrahman Bin Faisal University, Dammam 32141, Saudi Arabia

Tareq I. Alrawaf

4 Department of Landscape Architecture, College of Architecture and Planning, Imam Abdulrahman Bin Faisal University, Dammam 31441, Saudi Arabia

Associated Data

No data were reported in this review article.

Solid waste management (SWM) is one of the key responsibilities of city administrators and one of the effective proxies for good governance. Effective SWM mitigates adverse health and environmental impacts, conserves resources, and improves the livability of cities. However, unsustainable SWM practices, exacerbated by rapid urbanization and financial and institutional limitations, negatively impact public health and environmental sustainability. This review article assesses the human and environmental health impacts of SWM practices in the Global South cities that are the future of global urbanization. The study employs desktop research methodology based on in-depth analysis of secondary data and literature, including official documents and published articles. It finds that the commonplace SWM practices include mixing household and commercial garbage with hazardous waste during storage and handling. While waste storage is largely in old or poorly managed facilities such as storage containers, the transportation system is often deficient and informal. The disposal methods are predominantly via uncontrolled dumping, open-air incinerators, and landfills. The negative impacts of such practices include air and water pollution, land degradation, emissions of methane and hazardous leachate, and climate change. These impacts impose significant environmental and public health costs on residents with marginalized social groups mostly affected. The paper concludes with recommendations for mitigating the public and environmental health risks associated with the existing SWM practices in the Global South.

1. Introduction

Solid waste management (SWM) continues to dominate as a major societal and governance challenge, especially in urban areas overwhelmed by the high rate of population growth and garbage generation. The role of SWM in achieving sustainable development is emphasized in several international development agendas, charters, and visions. For example, sustainable SWM can help meet several United Nations’ Sustainable Development Goals (SDG), such as ensuring clean water and sanitation (SDG6), creating sustainable cities and inclusive communities (SDG11), mitigating climate change (SDG13), protecting life on land (SDG15), and demonstrating sustainable consumption and production patterns (SDG12) ( https://sdgs.un.org/goals , accessed on 26 September 2022). It also fosters a circular urban economy that promotes reductions in the consumption of finite resources, materials reuse and recycling for waste elimination, pollution reduction, cost saving, and green growth

However, coupled with economic growth, improved lifestyle, and consumerism, cities across the globe will continue to face an overwhelming challenge of SWM as the world population is expected to rise to 8 billion by 2025 and to 9.3 billion by 2050, out of which around 70% will be living in urban areas [ 1 , 2 ]. In developing countries, most cities collect only 50–80% of generated waste after spending 20–50% of their budgets, of which 80–95% are spent on collecting and transporting waste [ 3 , 4 ]. Moreover, many low-income countries collect as low as 10% of the garbage generated in suburban areas, which contributes to public health and environmental risks, including higher incidents of diarrhea and acute respiratory infections among people, particularly children, living near garbage dumps [ 5 ]. Obstacles to effective municipal SWM include lack of awareness, technologies, finances, and good governance [ 6 , 7 , 8 ].

Removing garbage from homes and businesses without greater attention to what was then carried out with it has also been the priority of municipal SWM in several cities of developing countries [ 9 ]. In most developing countries, garbage collected from households is disposed of in landfills or dumpsites, the majority of which are projected to reach their capacities within a decade. The unsustainable approach of dumping or burning waste in an open space, usually near poor communities on the city edge, or throwing garbage into water bodies was an acceptable garbage disposal strategy. Similarly, several cities still use old-generation or poorly managed facilities and informal uncontrolled dumping or open-air waste burning. Often, these practices affect marginalized social groups near the disposal sites [ 10 ]. Moreover, this approach poses several sustainability problems, including resource depletion, environmental pollution, and public health problems, such as the spread of communicable diseases.

However, ever since the advent of the environmental movement in the 1960s, there has been a far-reaching appreciation of environmental and public health risks of unsustainable SWM practices. In the 1970s and onward, SWM was a technical issue to be resolved using technology; hence, the emphasis and investments were placed on garbage collection equipment [ 5 ]. Although modern technology can significantly reduce emissions of hazardous substances, by the 1990s, that viewpoint changed when municipalities become unable to evacuate and dispose of garbage effectively without the active involvement of service users and other stakeholders [ 5 ]. The inability of the public sector in the global South to deliver sufficient improvement of SWM, coupled with the pressure from the financial institutions and other donor agencies, led to privatization policies at the end of the decade. However, as privatization failed to provide municipal SWM services to the poor and marginalized communities, the current global thinking on addressing municipal SWM problems is changing.

A more sustainable waste management approach prioritizes practices such as reduced production, waste classifications, reuse, recycling, and energy recovery over the common practices of landfilling, open dumps, and open incineration [ 11 , 12 , 13 ]. This approach, which is still at an early stage but getting increased attention in the Global South, is more inclusive and environment-friendly and has less negative impact on human health and the environment than the common practices [ 14 , 15 , 16 ]. As such, there is a need to assess SWM practices in the Global South and their impacts on environmental and human health because 90% of the expected growth in the urban population by 2050 is expected to happen here. So far, there are a few studies on the impacts of SWM practices on human health and the environment in the global regions.

Therefore, this review article addresses this knowledge gap by assessing the negative impacts of the dominant SWM practices on human and environmental health. Section 2 presents the research methodology. Section 3 reviews the major SWM practices in the Global South and assesses the environmental and public health implications of SWM practices in the Global South cities. While Section 4 discusses the implications of the findings and proffers recommendations that could help authorities to deal with SWM challenges and mitigate public and environmental health risks associated with unsustainable SWM practices, Section 5 concludes the paper.

2. Materials and Methods

The present paper utilizes a desktop research method of collecting and analyzing relevant data from the existing literature, as utilized in some previous studies [ 17 , 18 ]. The method consists of three iterative stages shown in Figure 1 : (a) scoping, (b) collecting relevant literature, and (c) data analysis. Firstly, the scoping stage involves defining and understanding the research problem under investigation and setting the study scope and boundary. The scope of the paper is to explore human and environmental impacts of SWM practices toward policy and practical recommendations for a more sustainable SWM system, with the Global South as the study boundary. This stage also helped identify relevant keywords to search for during the literature review in the second stage.

The flow chart of the research method (Source: [ 18 ] (p. 4)).

The second stage involved identifying and collecting relevant literature from online sources. The researchers utilized Google Scholar and Scopus databases to identify peer-reviewed academic works (peer-reviewed articles, conference proceedings, and books) as well as the gray literature. The literature that satisfied the following three inclusion criteria was identified and downloaded: (1) It is related to the study’s objective; (2) it is in the English language; and (3) it was published within the last twenty years, although some old documents about established concepts and approaches were also accessed. The downloaded gray literature includes newspaper articles, statistics, technical reports, and website contents from international development organizations such as the World Health Organization (WHO), the United Nations, and the World Bank.

In the last stage, the authors organized, analyzed, and synthesized the data collected from the literature. The downloaded works were organized according to the similarity of topics, even though some fit in more than one category. Then, each document was thoroughly examined, and themes concerned with SWM practices and their human and environmental impacts were collated, synthesized, and harmonized. Finally, the themes were summarized in Table A1 , Table A2 and Table A3 (see Appendix A ) and discussed. Implications and recommendations of the findings are then highlighted.

3. Results and Discussion

3.1. solid waste management practices in the global south.

Global municipal solid waste (MSW) generation rose from 1.3 billion tons in 2012 to 2.1 billion tons (0.74 kg/capita/day) as of 2016, which by 2050 is expected to increase by 70% to reach a total of 3.40 billion tons or 1.42 kg/capita/day [ 19 ]. The per capita MSW generation varies among regions and countries. In the EU (European Union), it ranges from 0.3–1.4 kg/capita/day [ 20 ], and in some African cities, the average is 0.78 kg/capita/day [ 21 ]. In Asia, urban areas generate about 760,000 tons of MSW per day, which is expected to increase to 1.8 million tons per day or 26% of the world’s total by 2025, despite the continent housing 53% of the world’s population [ 22 , 23 ]. In China, the total MSW generation was around 212 million tons (0.98 kg/capita/day) in 2006, out of which 91.4%, 6.4%, and 2.2% were disposed of via landfilling, incineration, and composting [ 24 ]. In 2010, only 660 Chinese cities produced about 190 million tons of MSW, accounting for 29% of the world’s total, while the total amount of solid waste in China could reach at least 480 million tons in 2030 [ 25 ]. In China, industrial waste (more than one billion tons) was five times the amount of MSW generated in 2002, which is expected to generate approximately twice as much MSW as the USA, while India will overtake the USA in MSW generation by 2030 [ 26 ].

In Malaysia, while the average rate of MSW generation was about 0.5–0.8 kg/person/day, Kuala Lumpur’s daily per capita generation rate was 1.62 kg in 2008 [ 27 ], which is expected to reach 2.23 kg in 2024 [ 28 ]. About 64% of Malaysia’s waste consists of household and office waste, 25% industrial waste, 8% commercial waste, and 3% construction waste [ 29 ]. In Sri Lanka, the assessed mean waste generation in 1999 was 6500 tons/day or 0.89 kg/cap/day, which is estimated to reach 1.0 kg/cap/day by 2025 [ 30 ]. With a 1.2% population growth rate, the total MSW generation in 2009 was approximately 7250 tons/day [ 31 ]. In Ghana, the solid waste generation rate was 0.47 kg/person/day, or about 12,710 tons per annum, consisting of biodegradable waste (0.318), non-biodegradable (0.096), and inert and miscellaneous waste (0.055) kg/person/day, respectively [ 32 ].

Moreover, global SWM costs are anticipated to increase to about $375.5 billion in 2025, with more than four-fold increases in lower- to middle-income countries and five-fold increases in low-income countries [ 33 ]. Globally, garbage collection, transportation, and disposal pose a major cost component in SWM systems [ 19 ]. Inadequate funding militates against the optimization of MSW disposal services. Table 1 compares the everyday SWM practices in low-, middle- and high-income countries according to major waste management steps. The literature indicates that waste generation rates and practices depend on the culture, socioeconomic status, population density, and level of commercial and industrial activities of a city or region.

Common MSW management practices by country’s level of economic development (adapted from [ 34 ]).

3.2. Environmental and Public Health Impacts of SWM Practices in the Global South

• (a)  Weak and Inadequate SWM System

Many problems in the cities of the global South are often associated with a weak or inadequate SWM system, which leads to severe direct and indirect environmental and public health issues at every stage of waste collection, handling, treatment, and disposal [ 30 , 31 , 32 , 33 , 34 ]. Inadequate and weak SWM results in indiscriminate dumping of waste on the streets, open spaces, and water bodies. Such practices were observed in, for example, Pakistan [ 35 , 36 ], India [ 37 ], Nepal [ 38 ], Peru [ 39 ], Guatemala [ 40 ], Brazil [ 41 ], Kenya [ 42 ], Rwanda [ 43 ], South Africa [ 44 , 45 ], Nigeria [ 46 ], Zimbabwe [ 47 ], etc.

The problems associated with such practices are GHG emissions [ 37 , 48 ], leachates [ 40 , 44 , 49 ], the spread of diseases such as malaria and dengue [ 36 ], odor [ 35 , 38 , 50 , 51 ], blocking of drains and sewers and subsequent flooding [ 52 ], suffocation of animals in plastic bags [ 52 ], and indiscriminate littering [ 38 , 39 , 53 ].

• (b)  Irregular Waste Collection and Handling

Uncollected and untreated waste has socioeconomic and environmental costs extending beyond city boundaries. Environmental sustainability impacts of this practice include methane (CH 4 ) emissions, foul odor, air pollution, land and water contamination, and the breeding of rodents, insects, and flies that transmit diseases to humans. Decomposition of biodegradable waste under anaerobic conditions contributes to about 18% and 2.9% of global methane and GHG emissions, respectively [ 54 ], with the global warming effect of about 25 times higher than carbon dioxide (CO 2 ) emissions [ 55 ]. Methane also causes fires and explosions [ 56 ]. Emissions from SWM in developing countries are increasing due to rapid economic growth and improved living standards [ 57 ].

Irregular waste collection also contributes to marine pollution. In 2010, 192 coastal countries generated 275 million metric tons of plastic waste out of which up to 12.7 million metric tons (4.4%) entered ocean ecosystems [ 58 ]. Moreover, plastic waste collects and stagnates water, proving a mosquito breeding habitat and raising the risks of dengue, malaria, and West Nile fever [ 56 ]. In addition, uncollected waste creates serious safety, health, and environmental consequences such as promoting urban violence and supporting breeding and feeding grounds for flies, mosquitoes, rodents, dogs, and cats, which carry diseases to nearby homesteads [ 4 , 19 , 59 , 60 ].

In the global South, scavengers often throw the remaining unwanted garbage on the street. Waste collectors are rarely protected from direct contact and injury, thereby facing serious health threats. Because garbage trucks are often derelict and uncovered, exhaust fumes and dust stemming from waste collection and transportation contribute to environmental pollution and widespread health problems [ 61 ]. In India’s megacities, for example, irregular MSW management is one of the major problems affecting air and marine quality [ 62 ]. Thus, irregular waste collection and handling contribute to public health hazards and environmental degradation [ 63 ].

• (c)  Landfilling and Open Dumping

Most municipal solid waste in the Global South goes into unsanitary landfills or open dumps. Even during the economic downturn during the COVID-19 pandemic, the amount of waste heading to landfill sites in Brazil, for example, increased due to lower recycling rates [ 64 ]. In Johor, Malaysia, landfilling destroys natural habitats and depletes the flora and fauna [ 65 ]. Moreover, landfilling with untreated, unsorted waste led to severe public health issues in South America [ 66 ]. Based on a study on 30 Brazilian cities, Urban and Nakada [ 64 ] report that 35% of medical waste was not properly treated before disposal, which poses a threat to public health, including the spread of COVID-19. Landfills and open dumps are also associated with high emissions of methane (CH 4 ), a major GHG [ 67 , 68 ]. Landfills and wastewater release 17% of the global methane emission [ 25 ]. About 29 metric tons of methane are emitted annually from landfills globally, accounting for about 8% of estimated global emissions, with 1.3 metric tons released from landfills in Africa [ 7 ]. The rate of landfill gas production steadily rises while MSW accumulates in the landfill emissions. Released methane and ammonia gases can cause health hazards such as respiratory diseases [ 37 , 69 , 70 , 71 ]. Since methane is highly combustible, it can cause fire and explosion hazards [ 72 ].

Open dumping sites with organic waste create the environment for the breeding of disease-carrying vectors, including rodents, flies, and mosquitoes [ 40 , 45 , 51 , 73 , 74 , 75 , 76 , 77 , 78 , 79 ]. Associated vector-borne diseases include zika virus, dengue, and malaria fever [ 70 , 71 , 72 , 73 , 74 , 75 , 76 , 77 , 78 , 79 , 80 ]. In addition, there are risks of water-borne illnesses such as leptospirosis, intestinal worms, diarrhea, and hepatitis A [ 80 , 81 ].

Odors from landfill sites, and their physical appearance, affect the lives of nearby residents by threatening their health and undermining their livelihoods, lowering their property values [ 37 , 38 , 68 , 82 , 83 , 84 ]. Moreover, the emission of ammonia (NH 3 ) from landfill sites can damage species’ composition and plant leaves [ 85 ]. In addition, the pollutants from landfill sites damage soil quality [ 73 , 84 ]. Landfill sites also generate dust and are sources of noise pollution [ 86 ].

Air and water pollution are intense in the hot and rainy seasons due to the emission of offensive odor, disease-carrying leachates, and runoff. Considerable amounts of methane and CO 2 from landfill sites produce adverse health effects such as skin, eyes, nose, and respiratory diseases [ 69 , 87 , 88 ]. The emission of ammonia can lead to similar problems and even blindness [ 85 , 89 ]. Other toxic gaseous pollutants from landfill sites include Sulphur oxides [ 89 ]. While less than 20% of methane is recovered from landfills in China, Western nations recover up to 60% [ 90 ].

Several studies report leachate from landfill sites contaminating water sources used for drinking and other household applications, which pose significant risks to public health [ 36 , 43 , 53 , 72 , 75 , 83 , 91 , 92 , 93 , 94 , 95 ]. For example, Hong et al. [ 95 ] estimated that, in 2006, the amount of leachates escaping from landfill sites in Pudong (China) was 160–180 m 3 per day. On the other hand, a properly engineered facility for waste disposal can protect public health, preserve important environmental resources, prevent clogging of drainages, and prevent the migration of leachates to contaminate ground and surface water, farmlands, animals, and air from which they enter the human body [ 61 , 96 ]. Moreover, heat in summer can speed up the rate of bacterial action on biodegradable organic material and produce a pungent odor [ 60 , 97 , 98 ]. In China, for example, leachates were not treated in 47% of landfills [ 99 ].

Co-mingled disposal of industrial and medical waste alongside municipal waste endangers people with chemical and radioactive hazards, Hepatitis B and C, tetanus, human immune deficiency, HIV infections, and other related diseases [ 59 , 60 , 100 ]. Moreover, indiscriminate disposal of solid waste can cause infectious diseases such as gastrointestinal, dermatological, respiratory, and genetic diseases, chest pains, diarrhea, cholera, psychological disorders, skin, eyes, and nose irritations, and allergies [ 10 , 36 , 60 , 61 ].

• (d)  Open Burning and Incineration

Open burning of MSW is a main cause of smog and respiratory diseases, including nose, throat, chest infections and inflammation, breathing difficulty, anemia, low immunity, allergies, and asthma. Similar health effects were reported from Nepal [ 101 ], India [ 87 ], Mexico, [ 69 ], Pakistan [ 52 , 73 , 84 ], Indonesia [ 88 ], Liberia [ 50 ], and Chile [ 102 ]. In Mumbai, for example, open incineration emits about 22,000 tons of pollutants annually [ 56 ]. Mongkolchaiarunya [ 103 ] reported air pollution and odors from burning waste in Thailand. In addition, plastic waste incineration produces hydrochloric acid and dioxins in quantities that are detrimental to human health and may cause allergies, hemoglobin deficiency, and cancer [ 95 , 104 ]. In addition, smoke from open incineration and dumpsites is a significant contributor to air pollution even for persons staying far from dumpsites.

• (e)  Composting

Composting is a biological method of waste disposal that entails the decomposing or breaking down of organic wastes into simpler forms by naturally occurring microorganisms, such as bacteria and fungi. However, despite its advantage of reducing organic waste by at least half and using compost in agriculture, the composting method has much higher CO 2 emissions than other disposal approaches. In Korea, for example, composting has the highest environmental impact than incineration and anaerobic digestion methods [ 105 ]. The authors found that the environmental impact of composting was found to be 2.4 times higher than that of incineration [ 105 ]. Some reviews linked composting with several health issues, including congested nose, sore throat and dry cough, bronchial asthma, allergic rhinitis, and extrinsic allergic alveolitis [ 36 , 106 ].

4. Implications and Recommendations

As discussed in the section above, there are many negative impacts of unsustainable SWM practices on the people and the environment. Although all waste treatment methods have their respective negative impacts, some have fewer debilitating impacts on people and the environment than others. The following is the summary of key implications of such unsustainable SWM practices.

• Uncollected organic waste from bins, containers and open dumps harbors rodents, insects, and reptiles that transmit diseases to humans. It also produces odor due to the decomposition of organic wastes, especially in the summer, and leachates that migrate and contaminate receiving underground and surface waters.
• Open dumps and non-engineered landfills release methane from decomposing biodegradable waste under anaerobiotic conditions. Methane is a key contributor to global warming, and it can cause fires and explosions.
• Non-biodegradable waste, such as discarded tires, plastics, bottles, and tins, pollutes the ground and collects water, thus creating breeding grounds for mosquitoes and increasing the risk of diseases such as malaria, dengue, and West Nile fever.
• Open burning of MSW emits pollutants into the atmosphere thereby increasing the incidences of nose and throat infections and inflammation, inhalation difficulties, bacterial infections, anemia, reduced immunity, allergies, and asthma.
• Uncontrolled incineration causes smog and releases fine particles, which are a major cause of respiratory disease. It also contributes to urban air pollution and GHG emissions significantly.
• Incineration and landfilling are associated with reproductive defects in women, developmental defects in children, cancer, hepatitis C, psychosocial impacts, poisoning, biomarkers, injuries, and mortality.

Therefore, measures toward more sustainable SWM that can mitigate such impacts must be worked out and followed. The growing complexity, costs, and coordination of SWM require multi-stakeholder involvement at each process stage [ 7 ]. Earmarking resources, providing technical assistance, good governance, and collaboration, and protecting environmental and human health are SWM critical success factors [ 47 , 79 ]. As such, local governments, the private sector, donor agencies, non-governmental organizations (NGOs), the residents, and informal garbage collectors and scavengers have their respective roles to play collaboratively in effective and sustainable SWM [ 40 , 103 , 107 , 108 ]. The following are key practical recommendations for mitigating the negative impacts of unsustainable SWM practices enumerated above.

First, cities should plan and implement an integrated SWM approach that emphasizes improving the operation of municipalities to manage all stages of SWM sustainably: generation, separation, transportation, transfer/sorting, treatment, and disposal [ 36 , 46 , 71 , 77 , 86 ]. The success of this approach requires the involvement of all stakeholders listed above [ 109 ] while recognizing the environmental, financial, legal, institutional, and technical aspects appropriate to each local setting [ 77 , 86 ]. Life Cycle Assessment (LCA) can likewise aid in selecting the method and preparing the waste management plan [ 88 , 110 ]. Thus, the SWM approach should be carefully selected to spare residents from negative health and environmental impacts [ 36 , 39 , 83 , 98 , 111 ].

Second, local governments should strictly enforce environmental regulations and better monitor civic responsibilities for sustainable waste storage, collection, and disposal, as well as health hazards of poor SWM, reflected in garbage littering observable throughout most cities of the Global South [ 64 , 84 ]. In addition, violations of waste regulations should be punished to discourage unsustainable behaviors [ 112 ]. Moreover, local governments must ensure that waste collection services have adequate geographical coverage, including poor and minority communities [ 113 ]. Local governments should also devise better SWM policies focusing on waste reduction, reuse, and recycling to achieve a circular economy and sustainable development [ 114 , 115 ].

Third, effective SWM requires promoting positive public attitudes toward sustainable waste management [ 97 , 116 , 117 , 118 ]. Therefore, public awareness campaigns through print, electronic, and social media are required to encourage people to desist from littering and follow proper waste dropping and sorting practices [ 36 , 64 , 77 , 79 , 80 , 82 , 91 , 92 , 119 ]. There is also the need for a particular focus on providing sorting bins and public awareness about waste sorting at the source, which can streamline and optimize subsequent SWM processes and mitigate their negative impacts [ 35 , 45 , 46 , 64 , 69 , 89 , 93 ]. Similarly, non-governmental and community-based organizations can help promote waste reduction, separation, and sorting at the source, and material reuse/recycling [ 103 , 120 , 121 , 122 ]. In Vietnam, for example, Tsai et al. [ 123 ] found that coordination among stakeholders and appropriate legal and policy frameworks are crucial in achieving sustainable SWM.

Fourth, there is the need to use environmentally friendly technologies or upgrade existing facilities. Some researchers prefer incineration over other methods, particularly for non-recyclable waste [ 44 , 65 ]. For example, Xin et al. [ 124 ] found that incineration, recycling, and composting resulted in a 70.82% reduction in GHG emissions from solid waste in Beijing. In Tehran city, Iran, Maghmoumi et al. [ 125 ] revealed that the best scenario for reducing GHG emissions is incinerating 50% of the waste, landfilling 30%, and recycling 20%. For organic waste, several studies indicate a preference for composting [ 45 , 51 , 75 ] and biogas generation [ 15 , 42 , 68 ]. Although some researchers have advocated a complete ban on landfilling [ 13 , 42 ], it should be controlled with improved techniques for leak detection and leachate and biogas collection [ 126 , 127 ]. Many researchers also suggested an integrated biological and mechanical treatment (BMT) of solid waste [ 66 , 74 , 95 , 119 ]. In Kenya, the waste-to-biogas scheme and ban on landfill and open burning initiatives are estimated to reduce the emissions of over 1.1 million tons of GHG and PM2.5 emissions from the waste by more than 30% by 2035 [ 42 ]. An appropriately designed waste disposal facility helps protect vital environmental resources, including flora, fauna, surface and underground water, air, and soil [ 128 , 129 ].

Fifth, extraction and reuse of materials, energy, and nutrients are essential to effective SWM, which provides livelihoods for many people, improves their health, and protects the environment [ 130 , 131 , 132 , 133 , 134 , 135 , 136 ]. For example, recycling 24% of MSW in Thailand lessened negative health, social, environmental, and economic impacts from landfill sites [ 89 ]. Waste pickers play a key role in waste circularity and should be integrated into the SWM system [ 65 , 89 , 101 , 137 ], even to the extent of taking part in decision-making [ 138 ]. In addition, workers involved in waste collection should be better trained and equipped to handle hazardous waste [ 87 , 128 ]. Moreover, green consumption, using bioplastics, can help reduce the negative impacts of solid waste on the environment [ 139 ].

Lastly, for effective SWM, local authorities should comprehensively address SWM challenges, such as lack of strategic SWM plans, inefficient waste collection/segregation and recycling, insufficient budgets, shortage of qualified waste management professionals, and weak governance, and then form a financial regulatory framework in an integrated manner [ 140 , 141 , 142 ]. Effective SWM system also depends on other factors such as the waste generation rate, population density, economic status, level of commercial activity, culture, and city/region [ 37 , 143 ]. A sustainable SWM strives to protect public health and the environment [ 144 , 145 ].

5. Conclusions

As global solid waste generation rates increase faster than urbanization, coupled with inadequate SWM systems, local governments and urban residents often resort to unsustainable SWM practices. These practices include mixing household and commercial garbage with hazardous waste during storage and handling, storing garbage in old or poorly managed facilities, deficient transportation practices, open-air incinerators, informal/uncontrolled dumping, and non-engineered landfills. The implications of such practices include air and water pollution, land degradation, climate change, and methane and hazardous leachate emissions. In addition, these impacts impose significant environmental and public health costs on residents with marginalized social groups affected mostly.

Inadequate SWM is associated with poor public health, and it is one of the major problems affecting environmental quality and cities’ sustainable development. Effective community involvement in the SWM requires promoting positive public attitudes. Public awareness campaigns through print, electronic, and social media are required to encourage people to desist from littering and follow proper waste-dropping practices. Improper SWM also resulted in water pollution and unhealthy air in cities. Future research is needed to investigate how the peculiarity of each Global South country can influence selecting the SWM approach, elements, aspects, technology, and legal/institutional frameworks appropriate to each locality.

Reviewed literature on the impacts of SWM practices in Asia (compiled by authors).

Reviewed literature on the impacts of SWM practices in South America (compiled by authors).

Reviewed literature on the impacts of SWM practices in Africa (compiled by authors).

Funding Statement

This research received no external funding.

Author Contributions

Conceptualization, I.R.A. and K.M.M.; methodology, I.R.A., K.M.M. and U.L.D.; validation, I.R.A., K.M.M. and U.L.D.; formal analysis, I.R.A. and K.M.M.; investigation, I.R.A., K.M.M., U.L.D., F.S.A., M.S.A., S.M.S.A. and W.A.G.A.-G.; resources, I.R.A., K.M.M., U.L.D., F.S.A., M.S.A., S.M.S.A., W.A.G.A.-G. and T.I.A.; data curation, U.L.D., F.S.A., M.S.A., S.M.S.A. and W.A.G.A.-G.; writing—original draft preparation, I.R.A., K.M.M., U.L.D., F.S.A., M.S.A., S.M.S.A. and W.A.G.A.-G.; writing—review and editing, I.R.A., K.M.M. and U.L.D.; supervision, F.S.A. and T.I.A.; project administration, I.R.A.; funding acquisition, I.R.A., K.M.M., U.L.D., F.S.A., M.S.A., S.M.S.A., W.A.G.A.-G. and T.I.A. All authors have read and agreed to the published version of the manuscript.

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Data availability statement, conflicts of interest.

The authors declare no conflict of interest in conducting this study.

Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

• Bibliography
• More Referencing guides Blog Automated transliteration Relevant bibliographies by topics
• Automated transliteration
• Relevant bibliographies by topics
• Referencing guides

final thesis.pdf

Abstract This thesis aimed at assessment of current municipal solid waste management practices and problems with particular emphasis to storage practices and container location in Nefas-silk lafto sub-city. Besides, the study had also specific objectives such as the existing status and spatial coverage of municipal solid waste management, the solid waste storage practices at household level and the locations of solid waste storage containers (skip points) in terms of accessibility and health threat to the community of Nifas-silk lafto sub-city in line with Ethiopian National Solid Waste Management Standards and other relevant international standards. The researcher used mixing quantitative and qualitative methods, and to select the target population systematic random sampling was employed. A total of 201 respondents were used in the study. Consequently, to accomplish the objectives, both primary and secondary data sources were used. The primary data were collected via questionnaires, interviews, and field observations. Whereas the secondary data were extracted from different published and unpublished materials. The findings of the study revealed that the current municipal solid waste management service in the sub-city is provided below the required quality or has a poor status in terms of usage of containers and its spatial coverage. According to the survey results, lack of institutional coordination among urban planners, the place of skip points were highly exposed to health threat, lack of standard household waste storage bins for the purpose of segregation of waste for each type at household level, lack of awareness raising and community participation priority for locating a skip point, and very weak enforcement of rules and regulation, standards and proclamation are some of the problems that account for poor municipal solid waste management service delivery in the sub-city. Finally, the study mainly suggest that, such measures alleviate the problems of municipal solid waste management: by creating driving motives into the community to use integrated sustainable solid waste management strategies by promoting public-private partnership, and creating effective institutional coordination with urban planner consultants in the area of municipal solid waste management in general and skip point location in particular.

Related Papers

Adane shunte

Yohannis Birhanu

ABSTRACT Solid waste, which is a consequence of day-to-day activity of human kind, needs to be managed properly. Jigjiga City, like other cities in developing countries, faces problems associated with poorly managed solid waste operation. This study concerns about analysis of the city’s current municipal solid waste management problems, pportunities and existing solid waste management practices and role of community participation. The survey was conducted in 03 and 05 kebeles. Different sampling methods were employed to select the study units including: stratified sampling, systematic random sampling, and purposive sampling. Though the bulk of the data collected were qualitative in nature, it was also supported by quantitative information collected through survey and secondary sources. The study discovered that there is low erformance of SWM in the city mainly due to: lack of properly designed collection system and time schedule, inadequate and malfunctioning operation equipment, open burning of refuse, poor condition of the final dumpsite and less awareness creation among community which encouraged illegal dumping are the technical problem identified. Insufficient funds as well as lack of promotion on-waste reduction, recycling, absence of waste recovery, practice of energy option, waste separation and composting are among the management challenges facing the city. Social problems encountered include: lack of public awareness, unwillingness to pay, ill dumping manner (often around residence and any open spaces) and improper outlook for waste workers. Incompetence of organizations in terms of equipment required for operation and man power /staff qualifications, training and human resource developments and/or unreliable service are the institutional challenge that the city encountered in the sector. Finally, the study forwarded some important recommendations towards improving the waste management practices.

Gemechu Shale Ogato

Mulugeta Abay

Ketsela A L E M I Gelan

ABSTRACT The study was conducted to assess the management of Municipal solid waste management practices using a case study of Fitche town, Ethiopia. Three specific objectives guided this study and these include establishing the status of the existing solid waste collection, transportation and disposal practices in Fitche town and capital town of Salale zone; to examine magnitude solid waste management problems and to design strategies to overcome waste management challenges in Fitche Town. Fitche is one of the town by which proper provision of Municipal solid waste management practice is still unsatisfactory and in complete. In Fitche, illegal dumping of waste on open areas, street, ditches and river courses is considered as routine task of residents. The efforts made by the municipality to change the situation in the town are also insufficient as it compared to the extent of the problem A case study of research design was used for this study in which a total of 60 respondents informed this study. These were reached through Cochran techniques of sampling for minimize the population. Observation, questionnaires and interviews were used during the collection of primary data. Data was analyzed quantitatively and qualitatively. According to the findings of the study, people in Fitche town use different methods in collection of solid waste, transport it and later dispose at recognized site. It was found that solid waste management is the work of small group under the authority of the municipality. It established that materials such as sacks are used in the due course to collect solid waste. The study concludes that the management and collection of solid waste is never a duty of neither one man’s person nor one organization: rather all groups and individuals at hand. Therefore, there is a need for all people to work for the clean environment and a better life at hand. The study also calls different groups and organizations to apply modern techniques for the collection, transportation and disposing of solid waste in Fitche Town, Salale. Key words: households’ solid waste collection, transportation of solid waste, solid waste management.

Asmera Amde

Aggrey Thuo

dadi dejene

Research-gate

Mohamed Jama

Solid waste management is the collection, transfer and disposal of all non –liquid and nongaseous solid materials from residential, commercial, institutional, construction and demolishing and street sweeping. It is a consequence of day-today activity of human kinds that needs to be managed properly. Burao city faces a lot of problems associated with a poorly managed solid waste systems. However, this study examined challenges facing the SWM in Burao city and factors influencing its effectiveness. The case study of Burao Municipality. Moreover, challenges were conceptualized as financial, institutional, technical, social and political aspects guided by contingency theory. Solid waste management effectiveness was described in collection, transportation and disposal. The purpose of this study was to examine the challenges of solid waste management and factors influencing its effectiveness: A case study in Burao Municipality Somaliland. By using census survey research study, the total participant of the research were 152 respondents. The data was collected in May-July 2019 and was analyzed using SPSS Version 21 and SmartPLS3. Using correlations The study established that financial constraint has a significant effect on collection and transportation where p=.000 but does not have any significant effect on disposal where p=.433. Technical aspect have a significant effect on collection, transportation and disposal where p value p=.000. Institutional aspect have a significant effect on collection, transportation and disposal where p-value p=.000. The social aspect has a significant effect on collection, transportation and disposal where p-value p=0.01. Political aspect has a significant effect on collection, transportation where p=0.000 but does not have any significant effect on disposal where p=.107. based on the findings of this study, its recommended strict enforcement of by law and policy, more budget allocation, technical support by the government, development of solid waste management through waste reduction, reuse, and recycling, retain staff with a good salary, benefit and training, and implement awareness-raising programs. Discussions, recommendations, limitations and suggestions for a future research study are further elaborated.

Journal of Environment and Earth Science

Prince Adu-Gyamfi Kyeremeh

RELATED PAPERS

Evolutionary Ecology

Jennifer Rudgers

FICHEIRO EPIGRÁFICO

Fernando Muñoz Villarejo , Jorge Sánchez-Lafuente Pérez

Nuclear Physics B

Christian Maus

Maria Thomas-ruzic

Fedumar Pedagogí­a y Educación

KAREN VANESSA MUÑOZ CHAMORRO

Elahe Ramezanzadeh

Perspectivas

Roberto Granados Porras

Monatshefte für Chemie Chemical Monthly

Topics in Clinical Nutrition

Barbara Scott

Rachmad Sigit Setiaji

Jurnal Kimia Riset

handa muliasari

Pecvnia : Revista de la Facultad de Ciencias Económicas y Empresariales, Universidad de León

Ana Chamorro

Mailane Cruz

Journal of Consulting and Clinical Psychology

russell adams

Revista médica de Chile

Gustavo Rios

fred zacarias

JMM Case Reports

Monica Prieto

Kledja Canaj

Molecular and Cellular Biology

Alexandria: Revista de Educação em Ciência e Tecnologia

Mauricio Compiani

The Open Food Science Journal

Thiago Duarte de Souza

Los adverbios con preposición en México: el cuestionario

Miriam Heila Reyes Núñez

International Journal for Equity in Health

Mohammed Abubakar

RELATED TOPICS

•   We're Hiring!
•   Help Center
• Find new research papers in:
• Health Sciences
• Earth Sciences
• Cognitive Science
• Mathematics
• Computer Science
• Academia ©2024

Victor Mukhin

• Scientific Program

Title : Active carbons as nanoporous materials for solving of environmental problems

However, up to now, the main carriers of catalytic additives have been mineral sorbents: silica gels, alumogels. This is obviously due to the fact that they consist of pure homogeneous components SiO2 and Al2O3, respectively. It is generally known that impurities, especially the ash elements, are catalytic poisons that reduce the effectiveness of the catalyst. Therefore, carbon sorbents with 5-15% by weight of ash elements in their composition are not used in the above mentioned technologies. However, in such an important field as a gas-mask technique, carbon sorbents (active carbons) are carriers of catalytic additives, providing effective protection of a person against any types of potent poisonous substances (PPS). In ESPE “JSC "Neorganika" there has been developed the technology of unique ashless spherical carbon carrier-catalysts by the method of liquid forming of furfural copolymers with subsequent gas-vapor activation, brand PAC. Active carbons PAC have 100% qualitative characteristics of the three main properties of carbon sorbents: strength - 100%, the proportion of sorbing pores in the pore space – 100%, purity - 100% (ash content is close to zero). A particularly outstanding feature of active PAC carbons is their uniquely high mechanical compressive strength of 740 ± 40 MPa, which is 3-7 times larger than that of  such materials as granite, quartzite, electric coal, and is comparable to the value for cast iron - 400-1000 MPa. This allows the PAC to operate under severe conditions in moving and fluidized beds.  Obviously, it is time to actively develop catalysts based on PAC sorbents for oil refining, petrochemicals, gas processing and various technologies of organic synthesis.

Victor M. Mukhin was born in 1946 in the town of Orsk, Russia. In 1970 he graduated the Technological Institute in Leningrad. Victor M. Mukhin was directed to work to the scientific-industrial organization "Neorganika" (Elektrostal, Moscow region) where he is working during 47 years, at present as the head of the laboratory of carbon sorbents.     Victor M. Mukhin defended a Ph. D. thesis and a doctoral thesis at the Mendeleev University of Chemical Technology of Russia (in 1979 and 1997 accordingly). Professor of Mendeleev University of Chemical Technology of Russia. Scientific interests: production, investigation and application of active carbons, technological and ecological carbon-adsorptive processes, environmental protection, production of ecologically clean food.   

Quick Links

• Conference Brochure
• Tentative Program

Intensification of evaporation of uranium hexafluoride

• Chemical Engineering Science and Chemical Cybernetics
• Published: 14 August 2013
• Volume 47 , pages 499–504, ( 2013 )

Cite this article

• A. M. Belyntsev 1 ,
• G. S. Sergeev 2 ,
• O. B. Gromov 2 ,
• A. A. Bychkov 1 ,
• A. V. Ivanov 2 ,
• S. I. Kamordin 3 ,
• P. I. Mikheev 4 ,
• V. I. Nikonov 2 ,
• I. V. Petrov 1 ,
• V. A. Seredenko 2 ,
• S. P. Starovoitov 1 ,
• S. A. Fomin 1 ,
• V. G. Frolov 1 &
• V. F. Kholin 2  

126 Accesses

4 Citations

Explore all metrics

The theoretical mechanism of the sublimation of uranium hexafluoride are considered. The most contribution to the rate of evaporation of UF 6 is introduced by the conductive mode of heat exchange. Various modes of the intensification of the evaporation of uranium hexafluoride during the nitrogen supply in pulse mode to the product mass are investigated. The nitrogen supply results in the turbulization of gas flow within a vessel (Re = 2500–4000) and significantly increases the rate of evaporation of uranium hexafluoride with the substantial decrease in a weight of the nonevaporable residue of 5.6–1.0 kg. The complex application of the pulse nitrogen supply in combination with heating the bottom of the vessel is the most effective method for evaporating uranium hexafluoride. The rate of evaporation of UF6 increases by a factor of almost four in comparison with the design mode. The developed methods are applied in industry and provide the stable operation of Saturn reactors during the conversion of uranium hexafluoride into its dioxide.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price includes VAT (Russian Federation)

Instant access to the full article PDF.

Rent this article via DeepDyve

Institutional subscriptions

Similar content being viewed by others

Degradation of Methylene Blue by Pulsed Nanosecond Discharge in Water with Ar-O2 Gaseous Bubbles

Nadir Aloui, Julien Pregent, … Ahmad Hamdan

Industrial-scale purging of ammonia by using nitrogen before environmental discharge

Ahmet Ozan Gezerman

Aluminium production process: from Hall–Héroult to modern smelters

Arne Petter Ratvik, Roozbeh Mollaabbasi & Houshang Alamdari

Gromov, B.V., Vvedenie v khimicheskuyu tekhnologiyu urana (Introduction to Uranium Chemical Technology), Moscow: Atomizdat, 1978.

Google Scholar  

Sergeev G.S. Study of the evaporation of uranuym hexafluoride from solid and liquid phases and ways of intensifying this process, Cand. Sci. (Eng.) Dissertation , Moscow: All-Union Research Inst. of Chemical Technology, 1970.

Lykov, A.V., Teoriya sushki kapillyarno-poristykh kolloidnykh materialov pishchevoi promyshlennosti (Theory of Drying of Capillary-Porous Colloid Materials of the Food Industry), Moscow: Gostekhizdat, 1948.

Sushkin, I.N., TeplotekhnikaF (Heat Engineering), Moscow: Metallurgiya, 1973.

Morachevskii, A.G. and Sladkoe, I.B., Fizikokhimicheskie svoistva molekulyarnykh neorganicheskikh soedinenii. Spravochnik (Physical and Chemical Properties of Molecular Inorganic Compounds: A Handbook), Leningrad: Khimiya, 1987.

Katz, J. and Rabinovich, E., The Chemistry of Uranium , New Yorl: McGraw-Hill, 1951.

Kasatkin, A.G., Osnovnye protsessy i apparaty khimicheskoi tekhnologii , (Fundamentals of Chemical Engineering Science), Noscow: Khimiya, 1971.

Bychkov, A.A., Nikonov, V.I., Seredenko, V.A., et al., Industrial tests and commercialization of fluorohydrocarbon evaporation from 1 m3 cylinders using nitrogen pulsing into the cylinder, in Sb. rabot MSZ i OAO VNIIKhT , (Collected Papers of MSZ and VNIIKhT), Moscow, 2005.

Petrov, N.V., Bychkov, A.A., Sergeev, G.S., et al., RF Patent 2264987, 2005.

Petrov, N.V., Bychkov, A.A., Seredenko, V.A., et al., RF Patent 2326053, 2008.

Download references

Author information

Authors and affiliations.

Engineering Works, Elektrostal’, Moscow oblast, Russia

A. M. Belyntsev, A. A. Bychkov, I. V. Petrov, S. P. Starovoitov, S. A. Fomin & V. G. Frolov

Leading Research Institute of Chemical Technology, Moscow, Russia

G. S. Sergeev, O. B. Gromov, A. V. Ivanov, V. I. Nikonov, V. A. Seredenko & V. F. Kholin

Bochvar All-Russia Research Institute of Inorganic Materials, Moscow, Russia

S. I. Kamordin

Bauman Moscow State Technical University, Moscow, Russia

P. I. Mikheev

You can also search for this author in PubMed   Google Scholar

Corresponding author

Correspondence to A. M. Belyntsev .

Additional information

Original Russian Text © A.M. Belyntsev, G.S. Sergeev, O.B. Gromov, A.A. Bychkov, A.V. Ivanov, S.I. Kamordin, P.I. Mikheev, V.I. Nikonov, I.V. Petrov, V.A. Seredenko, S.P. Starovoitov, S.A. Fomin, V.G. Frolov, V.F. Kholin, 2011, published in Khimicheskaya Tekhnologiya, 2011, Vol. 12, No. 11, pp. 675–681.

Rights and permissions

Reprints and permissions

About this article

Belyntsev, A.M., Sergeev, G.S., Gromov, O.B. et al. Intensification of evaporation of uranium hexafluoride. Theor Found Chem Eng 47 , 499–504 (2013). https://doi.org/10.1134/S0040579513040040

Download citation

Received : 25 January 2011

Published : 14 August 2013

Issue Date : July 2013

DOI : https://doi.org/10.1134/S0040579513040040

Share this article

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

• uranium hexafluoride
• sublimation
• turbulization of gas flow
• rate of evaporation of UF 6
• conversion UF 6 within N 2
• Find a journal
• Publish with us
• Track your research